Flexural strength evaluation of Persian clay brick masonry with gypsum mortar

References

• Analysis of Construction Gypsum, Technical Specifications of Physical and Chemical Formulas of Semnan Gypsum Types. (2020). Retrieved 17 October 2020, from https://irgyps.com/plaster-analyze/.
   Google Scholar
• Anderson, C., & Held, L. C. (1986). The effect of sand grading on mortar properties and the tensile bond of brickwork specimens. In Proceedings of the British Masonry Society, Stoke on Trent, 1, 1–5.
   Google Scholar
• ASTM:C1314. (2014). Standard test method for compressive strength of masonry prisms. ASTM International.
   Google Scholar
• Banerjee, S., Nayak, S., & Das, S. (2020). Shear and flexural behaviour of unreinforced masonry wallets with steel wire mesh. Journal of Building Engineering, 30, 101254. https://doi.org/10.1016/j.jobe.2020.101254
   Web of Science ®Google Scholar
• Baraldi, D., Reccia, E., Bello, C. B. D. C., & Cecchi, A. (2021). Laboratory and numerical experimentation for masonry in compression. International Journal of Masonry Research and Innovation, 6(1), 1–20. https://doi.org/10.1504/IJMRI.2021.112066
   Web of Science ®Google Scholar
• Bernat-Maso, E., Escrig, C., & Gil, L. (2017). Study of the compressive response of masonry using non-conventional joint materials. International Journal of Masonry Research and Innovation, 2(1), 83–103. https://doi.org/10.1504/IJMRI.2017.082399
   Google Scholar
• Binda, L., Fontana, A., & Frigerio, G. (1988). Mechanical behaviour of brick masonries derived from unit and mortar characteristics. Brick and Block Masonry (8th IBMAC). London, Elsevier Applied Science, 1, 205–216.
   Google Scholar
• BSI. (1998). BS EN 1052-1: Methods of test for masonry - determination of compressive strength. British Standards Institution.
   Google Scholar
• BSI. (1999). BS EN 1052-2: Methods of test for masonry units - Determination of flexural strength. British Standards Institution.
   Google Scholar
• BSI. (2006). BS EN 1015-11: Methods of test for mortar for masonry - Determination of flexural and compressive strength of hardened mortar. British Standards Institution.
   Google Scholar
• BSI. (2011). BS EN 772-1: Methods of test for masonry units - determination of compressive strength. British Standards Institution.
   Google Scholar
• BSI. (2014). BS EN 13279-2: Gypsum binders and gypsum plasters Part 2 : Test methods. British Standards Institution.
   Google Scholar
• Costigan, A., Pavía, S., & Kinnane, O. (2015). An experimental evaluation of prediction models for the mechanical behavior of unreinforced, lime-mortar masonry under compression. Journal of Building Engineering, 4, 283–294. https://doi.org/10.1016/j.jobe.2015.10.001
   Web of Science ®Google Scholar
• Dauda, J. A., Iuorio, O., & Lourenço, P. B. (2020). Numerical analysis and experimental characterisation of brick masonry. International Journal of Masonry Research and Innovation, 5(3), 321–347. https://doi.org/10.1504/IJMRI.2020.107994
   Web of Science ®Google Scholar
• Dehghan, S. M., Najafgholipour, M. A., Baneshi, V., & Rowshanzamir, M. (2018). Mechanical and bond properties of solid clay brick masonry with different sand grading. Construction and Building Materials, 174, 1–10. https://doi.org/10.1016/j.conbuildmat.2018.04.042
   Web of Science ®Google Scholar
• Ean, L. W., Malek, M. A., Mohammed, B. S., Tang, C. W., & Tamunif, M. T. (2019). Flexural and shear bond strength of sediment brick masonry. International Journal of Recent Technology and Engineering (IJRTE), 8(4), 6288–6294. https://doi.org/10.35940/ijrte.D5109.118419
   Google Scholar
• Endo, Y., Yamaguchi, K., Hanazato, T., & Mishra, C. (2020). Characterisation of mechanical behaviour of masonry composed of fired bricks and earthen mortar. Engineering Failure Analysis, 109, 104280. https://doi.org/10.1016/j.engfailanal.2019.104280
   Web of Science ®Google Scholar
• Fried, A. N., & Li, S. (1994). The influence of unit moisture content on masonry flexural strength. In Proceedings of the 10th International Brick and Block Masonry Conference, Calgary, 1-3, 939-45.
   Google Scholar
• Furtado, A., Rodrigues, H., & Arede, A. (2021). Cantilever flexural strength tests of masonry infill walls strengthened with textile-reinforced mortar. Journal of Building Engineering, 33, 101611. https://doi.org/10.1016/j.jobe.2020.101611
   Web of Science ®Google Scholar
• García, N. A., Gómez, G. G., & Serna, C. N. (2021). Strength of the flexural joint of mortar joints and solid fired clay brick prisms. In Journal of Physics: Conference Series (Vol. 2139, p. 012017). IOP Publishing.
   Google Scholar
• Hejazi, M., & Mehdizadeh Saradj, M. (2014). Persian architectural heritage: Architecture. WIT Press.
   Google Scholar
• Hejazi, M., & Soltani, Y. (2020). Performance of Persian open spandrel brick masonry barrel vaults under uniform and linear loads. Engineering Failure Analysis, 118, 104838. https://doi.org/10.1016/j.engfailanal.2020.104838
   Google Scholar
• Hejazi, M., Baranizadeh, S., & Daei, M. (2021). Performance of Persian brick masonry single-shell domes subjected to uniform pressure and concentrated load. Structures, 34, 1710–1719. https://doi.org/10.1016/j.istruc.2021.08.100
   Web of Science ®Google Scholar
• Hejazi, M., Hejazi, B., & Hejazi, S. (2015). Evolution of Persian traditional architecture through the history. Journal of Architecture and Urbanism, 39(3), 188–207. https://doi.org/10.3846/20297955.2015.1088415
   Web of Science ®Google Scholar
• Hejazi, M., Moayedian, S. M., & Daei, M. (2016). Structural analysis of Persian historical brick masonry minarets. Journal of Performance of Constructed Facilities, 30(2), 04015009. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000746
   Web of Science ®Google Scholar
• Jafari, S., Rots, J. G., & Esposito, R. (2019). Core testing method to assess nonlinear behavior of brick masonry under compression: A comparative experimental study. Construction and Building Materials, 218, 193–205. https://doi.org/10.1016/j.conbuildmat.2019.04.188
   Web of Science ®Google Scholar
• Kaushik, H. B., Rai, D. C., & Jain, S. K. (2007). Stress-strain characteristics of clay brick masonry under uniaxial compression. Journal of Materials in Civil Engineering, 19(9), 728–739. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:9(728)
   Web of Science ®Google Scholar
• Mohammed, A., Hughes, T. G., & Mustapha, A. (2011). The effect of scale on the structural behaviour of masonry under compression. Construction and Building Materials, 25(1), 303–307. https://doi.org/10.1016/j.conbuildmat.2010.06.025
   Web of Science ®Google Scholar
• Noor-E-Khuda, S., & Albermani, F. (2019). Mechanical properties of clay masonry units: Destructive and ultrasonic testing. Construction and Building Materials, 219, 111–120. https://doi.org/10.1016/j.conbuildmat.2019.05.166
   Web of Science ®Google Scholar
• Physical and Chemical Analysis of Ardestan Cement Type-2. (2020). Retrieved 17 October 2020, from https://www.ardestancement.com/home/fa/product/portland-cement-type-2.
   Google Scholar
• RILEM. (1994). Technical recommendations for the testing and use of construction materials. E&FN SPON.
   Google Scholar
• Sahlin, S. (1971). Structural masonry. Prentice-Hall.
   Google Scholar
• Segura, J., Pelà, L., Roca, P., & Cabané, A. (2019). Experimental analysis of the size effect on the compressive behaviour of cylindrical samples core-drilled from existing brick masonry. Construction and Building Materials, 228, 116759. https://doi.org/10.1016/j.conbuildmat.2019.116759
   Web of Science ®Google Scholar
• Shenbagavalli, S., & Chokkalingam, R. B. (2021). Flexural strength of fly ash brick masonry wall with four different bond. Journal of Physics: Conference Series, 2070(1), 012190. https://doi.org/10.1088/1742-6596/2070/1/012190
   Google Scholar
• Sise, A., Shrive, N. G., & Jessop, E. L. (1988). Flexural bond strength of masonry stack prisms. Masonry(2) Stoke-on-Trent, 2,103–107.
   Google Scholar
• Soleymani, A., Najafgholipour, M. A., & Johari, A. (2022). An experimental study on the mechanical properties of solid clay brick masonry with traditional mortars. Journal of Building Engineering, 58, 105057. https://doi.org/10.1016/j.jobe.2022.105057
   Web of Science ®Google Scholar
• Taha, M. R., Lucero, J. L., & Ross, T. J. (2005). Examining the significance of mortar andbrick unit properties on masonry bond strength using bayesian model screening. In 10th Canadian Masonry Symposium, Calgary, 742–51.
   Google Scholar