Flexural and cracking performance of ultra-high performance concrete beams with high-strength steel reinforcements

References

• Aaleti, S., Petersen, B., & Sritharan, S. (2013). Design guide for precast UHPC waffle deck panel system, including connections. Federal highway administration.
   Google Scholar
• Abbas, E. M., Ge, Y., Zhang, Z., Chen, Y., Ashour, A., Ge, W., Tang, R., Yang, Z., Khailah, E. Y., Yao, S., & Sun, C. (2022). Flexural behavior of UHPC beam reinforced with steel-FRP composite bars. Case Studies in Construction Materials, 16, e01110. 2022. e01110. https://doi.org/10.1016/j.cscm
   Google Scholar
• Abbass, W., & Khan, M. I. (2022). Experimental and numerical investigation of flexural behavior of hybrid fiber reinforced high strength incorporating binary and ternary blend of ultra fines. Structures, 42, 53–64. https://doi.org/10.1016/j.istruc.2022.05.116
   Web of Science ®Google Scholar
• ACI Committee 318. (2011). Building code requirements for structural concrete (ACI 318-11). American Concrete Institute.
   Google Scholar
• Aldabagh, S., Abed, F., & Yehia, S. (2018). Effect of types of concrete on flexural behavior of beams reinforced with high-strength steel bars. ACI Structural Journal, 115(2), 351–364. https://doi.org/10.14359/51701105
   Web of Science ®Google Scholar
• Al-Osta, M. A., Isa, M. N., Baluch, M. H., & Rahman, M. K. (2017). Flexural behavior of reinforced concrete beams strengthened with ultra-high performance fiber reinforced concrete. Construction and Building Materials, 134, 279–296. https://doi.org/10.1016/j.conbuildmat.2016.12.094
   Web of Science ®Google Scholar
• Bajaber, M. A., & Hakeem, I. Y. (2021). UHPC evolution, development, and utilization in construction: review. Journal of Materials Research and Technology, 10, 1058–1074. https://doi.org/10.1016/j.jmrt.2020.12.051
   Google Scholar
• Barbachyn, S. M., Devine, R. D., Thrall, A. P., & Kurama, Y. C. (2017). Economic evaluation of high-strength materials in stocky reinforced concrete shear walls. Journal of Construction Engineering and Management, 143(10), 04017074. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001377
   Web of Science ®Google Scholar
• CSA A23.3-04. (2019). Design of concrete structures. Canadian Standards Association.
   Google Scholar
• Dong, Z., Wu, G., Zhao, X. L., Zhu, H., & Shao, X. (2019). Behaviors of hybrid beams composed of seawater sea-sand concrete (SWSSC) and a prefabricated UHPC shell reinforced with FRP bars. Construction and Building Materials, 213, 32–42. https://doi.org/10.1016/j.conbuildmat.2019.04.059
   Web of Science ®Google Scholar
• Feng, P., Qiang, H. L., & Ye, L. P. (2017). Discussion and definition on yield points of materials, members and structures. Engineering Mechanics, 34(3), 36–46. https://doi.org/10.6052/j.issn.1000-4750.2016.03.0192
   Google Scholar
• Feng, Z., Li, C., Yoo, D. Y., Pan, R., He, J., & Ke, L. (2021). Flexural and cracking behaviors of reinforced UHPC beams with various reinforcement ratios and fiber contents. Engineering Structures, 248, 113266. https://doi.org/10.1016/j.engstruct.2021.113266
   Web of Science ®Google Scholar
• GB 50010-2010. (2010). Code for design of concrete structure. China Architecture and Building Press. (In Chinese).
   Google Scholar
• GB/T 228.1-2021. (2021). Metallic materials-tensile testing at ambient temperature. China Standards Press. (In Chinese).
   Google Scholar
• GB/T 50146-2014. (2014). Technical code for application of fly ash concrete. China Planning Press. (In Chinese).
   Google Scholar
• GB/T 50152-2012. (2012). Standard for test method of concrete structures. China Building Industry Press. (In Chinese).
   Google Scholar
• Gribniak, V., Kaklauskas, G., Torres, L., Daniunas, A., Timinskas, E., & Gudonis, E. (2013). Comparative analysis of deformations and tension-stiffening in concrete beams reinforced with GFRP or steel bars and fibers. Composites Part B: Engineering, 50, 158–170. https://doi.org/10.1016/j.compositesb.2013.02.003
   Web of Science ®Google Scholar
• Guan, J. F., Liu, L. A., Bai, W. F., Yao, X. H., Wang, D., & Zhao, S. B. (2020). Research on rigidity of high-strength concrete beams with 600MPa steel bars. Journal of Basic Science and Engineering, 28(5), 1197–1211. https://doi.org/10.16058/j.issn.1005-0930.2020.05.016
   Google Scholar
• Guan, J. F., Liu, L. A., Zhang, Q., Bai, W. F., Yao, X. H., & Zhao, S. B. (2021). Experimental study and calculation method of mid-span deformation of RC beams with 600 MPa steel bars. Journal of Building Structures, 42(8), 59–72. https://doi.org/10.14006/j.jzjgxb.2017.0852
   Google Scholar
• Habel, K., Viviani, M., Denarié, E., & Brühwiler, E. (2006). Development of the mechanical properties of an Ultra-High Performance Fiber Reinforced Concrete (UHPFRC). Cement and Concrete Research, 36(7), 1362–1370. https://doi.org/10.1016/j.cemconres.2006.03.009
   Web of Science ®Google Scholar
• Hadi, M. N. S., & Elbasha, N. (2007). Effects of tensile reinforcement ratio and compressive strength on the behaviour of over-reinforced helically confined HSC beams. Construction and Building Materials, 21(2), 269–276. https://doi.org/10.1016/j.conbuildmat.2005.08.020
   Web of Science ®Google Scholar
• Hasgul, U., Turker, K., Birol, T., & Yavas, A. (2018). Flexural behavior of ultra-high-performance fiber reinforced concrete beams with low and high reinforcement ratios. Structural Concrete, 19(6), 1577–1590. https://doi.org/10.1002/suco.201700089
   Web of Science ®Google Scholar
• Hoang, A. L., & Fehling, E. (2017). Influence of steel fiber content and aspect ratio on the uniaxial tensile and compressive behavior of ultra high performance concrete. Construction and Building Materials, 153, 790–806. https://doi.org/10.1016/j.conbuildmat.2017.07.130
   Web of Science ®Google Scholar
• Huang, X. X., Be, Y. Q., Sui, L. L., Li, L. Y., Hu, B., & Zhou, Y. W. (2022). Reliability assessment on maximum crack width of concrete beams reinforced with high-strength steel bars. Journal of Building Engineering, 45, 103564. https://doi.org/10.1016/j.jobe.2021.103564
   Web of Science ®Google Scholar
• Hussein, L., & Amleh, L. (2015). Structural behavior of ultra-high performance fiber reinforced concrete-normal strength concrete or high strength concrete composite members. Construction and Building Materials, 93, 1105–1116. https://doi.org/10.1016/j.conbuildmat.2015.05.030
   Web of Science ®Google Scholar
• JSCE (Japan Society of Civil Engineers). (2006). Recommendations for design and construction of ultrahigh strength fibre reinforced concrete structures (draft). JSCE Guideline for Concrete.
   Google Scholar
• Kim, Y. Y., Lee, B. Y., Bang, J. W., Han, B. C., Feo, L., & Cho, C. G. (2014). Flexural performance of reinforced concrete beams strengthened with strain-hardening cementitious composite and high strength reinforcing steel bar. Composites Part B: Engineering, 56, 512–519. https://doi.org/10.1016/j.compositesb.2013.08.069
   Web of Science ®Google Scholar
• Liao, Q., Li, L. Z., Li, B. X., & Yu, J. T. (2021). Prediction on the flexural deflection of ultra-high strength rebar reinforced ECC beams at service loads. Structures, 33(4), 246–258. https://doi.org/10.1016/j.istruc.2021.04.050
   Google Scholar
• Mast, R. F., Dawood, M., Rizkalla, S. H., & Zia, P. (2008). Flexural strength design of concrete beams reinforced with high-strength steel bars. ACI Structural Journal, 105(5), 570–577. https://doi.org/10.14359/19940
   Web of Science ®Google Scholar
• Meng, S., Jiao, C., Ouyang, X., Niu, Y., & Fu, J. (2022). Effect of steel fiber-volume fraction and distribution on flexural behavior of Ultra-high performance fiber reinforced concrete by digital image correlation technique. Construction and Building Materials, 320, 126281. https://doi.org/10.1016/j.conbuildmat.2021.126281
   Web of Science ®Google Scholar
• NF P 18-710. (2016). National addition to Eurocode 2—Design of concrete structures: specific rules for Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC). French Standard.
   Google Scholar
• Ni, X. Y., Qiang, Z., & Li, Y. Z. (2022). Cyclic test and numerical analysis of the seismic performance of concrete columns reinforced by HRB600 steel bars. Journal of Building Engineering, 50, 104211. https://doi.org/10.1016/j.jobe.2022.104211
   Web of Science ®Google Scholar
• Qiu, M. H., Shao, X. D., Hu, W. Y., Zhao, X. D., & Wang, Y. (2020). Calculation method for crack width of reinforced UHPC flexural components. China Civil Engineering Journal, 53(10), 89–98 + 119.
   Google Scholar
• Richard, P., & Cheyrezy, M. (1995). Composition of reactive powder concretes. Cement and Concrete Research, 25(7), 1501–1511. https://doi.org/10.1016/0008-8846(95)00144-2
   Web of Science ®Google Scholar
• Sijavandi, K., Sharbatdar, M. K., & Kheyroddin, A. (2021). Experimental evaluation of flexural behavior of high-performance fiber reinforced concrete beams using GFRP and high strength steel bars. Structures, 33, 4256–4268. https://doi.org/10.1016/j.istruc.2021.07.020
   Web of Science ®Google Scholar
• Singh, M., Sheikh, A. H., Mohamed Ali, M. S., Visintin, P., & Griffith, M. C. (2017). Experimental and numerical study of the flexural behaviour of ultra-high performance fibre reinforced concrete beams. Construction and Building Materials, 138, 12–25. https://doi.org/10.1016/j.conbuildmat.2017.02.002
   Web of Science ®Google Scholar
• Sturm, A. B., Visintin, P., & Oehlers, D. J. (2020). Blending fibres to enhance the flexural properties of UHPFRC beams. Construction and Building Materials, 244, 118328. https://doi.org/10.1016/j.conbuildmat.2020.118328
   Web of Science ®Google Scholar
• Sun, G. Y., Deng, M., Zheng, G., & Li, Q. (2019). Design for cost performance of crashworthy structures made of high strength steel. Thin-Walled Structures, 138, 458–472. https://doi.org/10.1016/j.tws.2018.07.014
   Web of Science ®Google Scholar
• Turker, K., Hasgul, U., Birol, T., Yavas, A., & Yazici, H. (2019). Hybrid fiber use on flexural behavior of ultra high performance fiber reinforced concrete beams. Composite Structures, 229, 111400. https://doi.org/10.1016/j.compstruct.2019.111400
   Web of Science ®Google Scholar
• Xu, H. B., & Deng, Z. C. (2014). Cracking moment and crack width of ultra-high performance concrete beams. Journal of Harbin Institute of Technology, 46(4), 87–92. In Chinese).
   Google Scholar
• Yao, X. H., Guan, J. F., Liu, L. A., Zhang, Q., Bai, W. F., & Wang, W. S. (2021). Experimental study on crack width of concrete beams with 600 MPa high-strength steel bars. Journal of Building Structures, 42(6), 169–181. https://doi.org/10.14006/j.jzjgxb.2019.0350
   Google Scholar
• Yoo, D., Banthia, N., & Yoon, Y. (2017). Experimental and numerical study on flexural behavior of ultra-high-performance fiber-reinforced concrete beams with low reinforcement ratios. Canadian Journal of Civil Engineering, 44(1), 18–28. https://doi.org/10.1139/cjce-2015-0384
   Web of Science ®Google Scholar
• Yoo, D., & Yoon, Y. (2015). Structural performance of ultra-high-performance concrete beams with different steel fibers. Engineering Structures, 102, 409–423. https://doi.org/10.1016/j.engstruct.2015.08.029
   Web of Science ®Google Scholar
• Zhang, J. W., Liu, J., Li, X. Y., & Cao, W. L. (2021). Seismic behavior of steel fiber-reinforced high-strength concrete mid-rise shear walls with high-strength steel rebar. Journal of Building Engineering, 42, 102462. 2021.102462. https://doi.org/10.1016/j.jobe
   Web of Science ®Google Scholar
• Zhuang, M. L., Sun, C. Z., & Dong, B. (2022). Experimental and numerical investigations on seismic performance of HTRB630 high-strength steel bars reinforced concrete columns. Case Studies in Construction Materials, 17, e01185. https://doi.org/10.1016/j.cscm.2022.e01185
   Google Scholar