Large eddy simulations of wind loads on an external floating-roof tank

References

• Acheinbach, E. (1968). Distribution of local pressure and skin friction around a circular cylinder in cross-flow up to Re = 5×106. Journal of Fluid Mechanics, 34, 625–669. doi: 10.1017/S0022112068002120
   Web of Science ®Google Scholar
• Achenbach, E. (1972). Experiments on flow past spheres at very high Reynolds numbers. Journal of Fluid Mechanics, 54, 565–575. doi: 10.1017/S0022112072000874
   Web of Science ®Google Scholar
• Akbarian, E., Najafi, B., Jafari, M., Ardabili, S. F., Shamshirband, S., & Chau, K. W. (2018). Experimental and CFD-based numerical simulation of using natural gas in a dual-fuelled diesel engine. Engineering Applications of Computational Fluid Mechanics, 12(1), 517–534. doi: 10.1080/19942060.2018.1472670
   Web of Science ®Google Scholar
• Ardabili, S. F., Najafi, B., Shamshirband, S., Bidgoli, B. M., Deo, R. C., & Chau, K. W. (2018). Computational intelligence approach for modeling hydrogen production: A review. Engineering Applications of Computational Fluid Mechanics, 12(1), 438–458. doi: 10.1080/19942060.2018.1452296
   Web of Science ®Google Scholar
• Erlebacher, G. (1990). Toward the large-eddy simulation of compressible turbulent flows. Journal of Fluid Mechanics, 238, 155–185. doi: 10.1017/S0022112092001678
   Web of Science ®Google Scholar
• Falcinelli, O. A., Elaskar, S. A., & Godoy, L. A. (2011). Influence of topography on wind pressures in tanks using CFD. Latin American Applied Research, 41(4), 379–388.
   Web of Science ®Google Scholar
• Germano, M., Piomelli, U., Moin, P., & Cabot, W. H. (1991). A dynamic subgrid-scale eddy viscosity model. Physics of Fluids A: Fluid Dynamics, 3, 1760–1765. doi: 10.1063/1.857955
   Web of Science ®Google Scholar
• Ghalandari, M., Koohshahi, E. M., Mohamadian, F., Shamshirband, S., & Chau, K. W. (2019). Numerical simulation of nanofluid flow inside root canal. Engineering Applications of Computational Fluid Mechanics, 13(1), 254–264. doi: 10.1080/19942060.2019.1578696
   Web of Science ®Google Scholar
• Godoy, L. A. (2007). Performance of storage tanks in oil facilities following hurricanes Katrina and Rita. ASCE Journal Performance of Constructed Facilities, 21(6), 441–449. doi: 10.1061/(ASCE)0887-3828(2007)21:6(441)
   Web of Science ®Google Scholar
• Greiner, R., & Derler, P. (1995). Effect of imperfections on wind-loaded cylindrical shells. Thin-Walled Structures, 23(1–4), 271–281. doi: 10.1016/0263-8231(95)00016-7
   Web of Science ®Google Scholar
• Hannat, R., Weiss, J., Garnier, F., & Morency, F. (2014). Application of the dual Kriging method for the design of hot-air-based aircraft wing anti-icing system. Engineering Applications of Computational Fluid Mechanics, 8(4), 530–548. doi: 10.1080/19942060.2014.11083305
   Web of Science ®Google Scholar
• Hinze, J. O. (1975). Turbulence. New York: McGraw-Hill.
   Google Scholar
• Holroyd, R. J. (1983). On the behaviour of open-topped oil storage tanks in high winds, Part I. Aerodynamic aspects. Journal of Wind Engineering and Industrial Aerodynamics, 12, 329–352. doi: 10.1016/0167-6105(83)90054-5
   Web of Science ®Google Scholar
• Lilly, D. K. (1992). A proposed modification of the Germano subgrid-scale closure method. Physics of Fluids A: Fluid Dynamics, 4(4), 633. doi: 10.1063/1.858280
   Web of Science ®Google Scholar
• Lin, Y., & Zhao, Y. (2014). Wind loads on fixed-roof cylindrical tanks with very low aspect ratio. Wind and Structures: An International Journal, 18(6), 651–668. doi: 10.12989/was.2014.18.6.651
   Web of Science ®Google Scholar
• Macdonald, P. A., Kwok, K. C. S., & Holmes, J. D. (1988). Wind loads on circular storage bins, silos and tanks: Point pressure measurements on isolated structures. Journal of Wind Engineering and Industrial Aerodynamics, 31, 165–188. doi: 10.1016/0167-6105(88)90003-7
   Web of Science ®Google Scholar
• Montazeri, H., & Blocken, B. (2013). CFD simulation of wind-induced pressure coefficients on buildings with and without balconies: Validation and sensitivity analysis. Building and Environment, 60(2), 137–149. doi: 10.1016/j.buildenv.2012.11.012
   Web of Science ®Google Scholar
• Mou, B., He, B. J., Zhao, D. X., & Chau, K. W. (2017). Numerical simulation of the effects of building dimensional variation on wind pressure distribution. Engineering Applications of Computational Fluid Mechanics, 11(1), 293–309. doi: 10.1080/19942060.2017.1281845
   Web of Science ®Google Scholar
• Mulhearn, P. J., Banks, H. J., Finnigan, J. J., & Annis, P. C. (1976). Wind forces and their influence on gas loss from grain storage structures. Journal of Stored Products Research, 12(3), 129–142. doi: 10.1016/0022-474X(76)90001-1
   Web of Science ®Google Scholar
• Murakami, S., & Mochida, A. (1995). On turbulent vortex shedding flow past 2D square cylinder predicted by CFD. Journal of Wind Engineering and Industrial Aerodynamics, 54–55, 191–211. doi: 10.1016/0167-6105(94)00043-D
   Web of Science ®Google Scholar
• Nicoud, F., & Ducros, F. (1999). Subgrid-scale stress modeling based on the square of the velocity gradient tensor. Flow Turbulence & Combustion, 62(3), 183–200. doi: 10.1023/A:1009995426001
   Web of Science ®Google Scholar
• Pasley, H., & Clark, C. (2000). Computational fluid dynamics study of flow around floating-roof oil storage tanks. Journal of Wind Engineering and Industrial Aerodynamics, 86(1), 37–54. doi: 10.1016/S0167-6105(99)00138-5
   Web of Science ®Google Scholar
• Pope, S. (2000). Turbulent flows. Cambridge: Cambridge University Press.
   Google Scholar
• Portela, G., Virella, J. C., & Godoy, L. A. (2006). Buckling of unanchored tanks under wind. XXIII South Eastern Conference on Theoretical and Applied Mechanics, Puerto Rico, pp. 167–176.
   Google Scholar
• Probert, S. D., Hasoon, M. A., & Lee, T. S. (1973). Boundary layer separation for winds flowing around large fixed-roof oil-storage tanks with small aspect ratios. Atmospheric Environment, 7(6), 651–654. doi: 10.1016/0004-6981(73)90022-X
   Web of Science ®Google Scholar
• Ramezanizadeh, M., Nazari, M. A., Ahmadi, M. H., & Chau, K. W. (2019). Experimental and numerical analysis of a nanofluidic thermosyphon heat exchanger. Engineering Applications of Computational Fluid Mechanics, 13(1), 40–47. doi: 10.1080/19942060.2018.1518272
   Web of Science ®Google Scholar
• Shur, M. L., Spalart, P. R., Strelets, M. K., & Travin, A. K. (2008). A hybrid RANS-LES approach with delayed-DES and wall-modelled LES capabilities. International Journal of Heat and Fluid Flow, 29, 1638–1649. doi: 10.1016/j.ijheatfluidflow.2008.07.001
   Web of Science ®Google Scholar
• Smagorinsky, J. (1963). General circulation experiments with the primitive equations. Monthly Weather Review, 91(3), 99–164. doi: 10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2
   Google Scholar
• Tominaga, Y., Mochida, A., Yoshie, R., Kataoka, H., Nozu, T., Yoshikawa, M., & Shirasawa, T. (2008). AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings. Journal of Wind Engineering and Industrial Aerodynamics, 96, 1749–1761. doi: 10.1016/j.jweia.2008.02.058
   Web of Science ®Google Scholar
• Uematsu, Y., Koo, C., & Yasunaga, J. (2014). Design wind force coefficients for open-topped oil storage tanks focusing on the wind-induced buckling. Journal of Wind Engineering and Industrial Aerodynamics, 130, 16–29. doi: 10.1016/j.jweia.2014.03.015
   Web of Science ®Google Scholar