Numerical and experimental analysis on the non-uniform inflow characteristics of a reactor coolant pump with a steam generator channel head

References

• Allen, M. E., Werth, D. E., & Allaben, C. C. (2014). Evaluation of reducing elbow characteristics versus velocity distribution at the pump inlet. In World environmental and water resources congress 2014 (pp. 1207–1215). doi: abs/10.1061/9780784413548.121
   Google Scholar
• Bulten, N. W. H. (2006). Numerical analysis of a waterjet propulsion system (Doctoral dissertation). Retrieved from research.tue.nl/en/publications/numerical-analysis-of-a-waterjet-propulsion-system
   Google Scholar
• Cheng, H., Li, H., Yin, J., Gu, X., Hu, Y., & Wang, D. (2014). Investigation of the distortion suction flow on the performance of the canned nuclear coolant pump. In 6th International Symposium on Fluid Machinery and Fluid Engineering, ISFMFE 2014 (pp. 166–171). doi: 10.1049/cp.2014.1144
   Google Scholar
• Degani, D., Seginer, A., & Levy, Y. (1990). Graphical visualization of vortical flows by means of helicity. AIAA Journal, 28(8), 1347–1352. doi: 10.2514/3.25224
   Web of Science ®Google Scholar
• Engeda, A., Kim, Y., Aungier, R., & Direnzi, G. (2003). The inlet flow structure of a centrifugal compressor stage and its influence on the compressor performance. Journal of Fluids Engineering, 125(5), 779–785. doi: 10.1115/1.1601255
   Web of Science ®Google Scholar
• Ghalandari, M., Koohshahi, E. M., Mohamadian, F., Shamshirband, S., & Chau, K. W. (2019). Numerical simulation of nanofluid flow inside a root canal. Engineering Applications of Computational Fluid Mechanics, 13(1), 254–264. doi: 10.1080/19942060.2019.1578696
   Web of Science ®Google Scholar
• Hou, X., Wang, P., Xu, Z., & Ruan, X. (2016). Influence of steam generator channel head on reactor coolant pump inflow field. Journal of Drainage and Irrigation Machinery Engineering, 34(4), 277–282. doi: 10.3969/j.issn.1674-8530.15.0207
   Google Scholar
• Huang, W., Zhang, W. Q., Tao, W. Q., He, J. S., Huang, H., Zhang, F. Y., & Liu, X. B. (2002). Flow characteristics experimental study within connection between steam generator channel head and pump suction. Nuclear Power Engineering, 23(2; SUPP), 38–42. doi: 10.1007/s11630-008-0314-1
   Web of Science ®Google Scholar
• Jeong, J. J., Hwang, M., Lee, Y. J., & Chung, B. D. (2004). Non-uniform flow distribution in the steam generator U-tubes of a pressurized water reactor plant during single- and two-phase natural circulations. Nuclear Engineering and Design, 231(3), 303–314. doi: 10.1016/j.nucengdes.2004.02.002
   Web of Science ®Google Scholar
• Li, Y. J., & Wang, F. J. (2007). Numerical investigation of performance of an axial-flow pump with inducer. Journal of Hydrodynamics, Ser. B, 19(6), 705–711. doi: 10.1016/S1001-6058(08)60007-4
   Web of Science ®Google Scholar
• Long, Y., Wang, D., Yin, J., Hu, Y., & Ran, H. (2017). Numerical investigation on the unsteady characteristics of reactor coolant pumps with non-uniform inflow. Nuclear Engineering and Design, 320, 65–76. doi: 10.1016/j.nucengdes.2017.04.027
   Web of Science ®Google Scholar
• Long, Y., Wang, D., Yin, J., & Hu, Y. (2017). Experimental investigation on the unsteady pressure pulsation of reactor coolant pumps with non-uniform inflow. Annals of Nuclear Energy, 110, 501–510. doi: 10.1016/j.anucene.2017.07.010
   Web of Science ®Google Scholar
• Lu, Y., Yang, J., Wang, X., & Zhou, F. (2018). A symmetrical-nonuniform angular repartition strategy for the vane blades to improve the energy conversion ability of the coolant pump in the pressurized water reactor. Nuclear Engineering and Design, 337, 245–260. doi: 10.1016/j.nucengdes.2018.07.007
   Web of Science ®Google Scholar
• Mou, B., He, B. J., Zhao, D. X., & Chau, K.-w. (2017). Numerical simulation of the effects of building dimensional variation on wind pressure distribution. Engineering Applications of Computational Fluid Mechanics, 11(1), 293–309. doi: 10.1080/19942060.2017.1281845
   Web of Science ®Google Scholar
• Ni, D., Yang, M., Gao, B., Zhang, N., & Li, Z. (2016). Flow unsteadiness and pressure pulsations in a nuclear reactor coolant pump. Strojniski Vestnik/Journal of Mechanical Engineering, 62(4), 231–242. doi: 10.5545/sv-jme.2015.3192
   Web of Science ®Google Scholar
• Schulz, T. L. (2006). Westinghouse AP1000 advanced passive plant. Nuclear Engineering and Design, 236(14–16), 1547–1557. doi: 10.1016/j.nucengdes.2006.03.049
   Web of Science ®Google Scholar
• Sheoran, Y., Bouldin, B., & Krishnan, P. M. (2010, October). Compressor performance and operability in swirl distortion. In ASME Turbo Expo 2010: Power for Land, Sea, and Air (pp. 2453–2464). American Society of Mechanical Engineers. doi: 10.1115/GT2010-22777
   Google Scholar
• Sun, H., Li, J., & Feng, Z. (2012). Investigations on aerodynamic performance of turbine cascade at different flow conditions. Engineering Applications of Computational Fluid Mechanics, 6(2), 214–223. doi: 10.1080/19942060.2012.11015416
   Web of Science ®Google Scholar
• Vagnoli, S., & Verstraete, T. (2015). URANS analysis of the effect of realistic inlet distortions on the stall inception of a centrifugal compressor. Computers & Fluids, 116, 192–204. doi: 10.1016/j.compfluid.2015.03.015
   Web of Science ®Google Scholar
• Van Esch, B. P. M. (2009). Performance and radial loading of a mixed-flow pump under non-uniform suction flow. Journal of Fluids Engineering, 131(5), 051101. doi:10.1115/1.3089539.051101 doi: 10.1115/1.3089539
   Web of Science ®Google Scholar
• Wang, W., Wang, Y., Lu, S., Hou, T., & Wang, X. (2017). Research on effects of non-uniform suction flow on performance in reactor coolant pump. Journal of Dalian University of Technology, 57(5), 453–458. doi: 10.7511/dllgxb201705003
   Google Scholar
• Wang, Y., Wang, P., Tan, X., Xu, Z., & Ruan, X. (2018). Research on the non-uniform inflow characteristics of the canned nuclear coolant pump. Annals of Nuclear Energy, 115, 423–429. doi: 10.1016/j.anucene.2018.02.007
   Web of Science ®Google Scholar
• Xu, Z. H. (2004). The analysis of three-dimensional flow in high-speed pump and research of its fluid-induced pressure fluctuation (Doctoral dissertation). Retrieved from http://cdmd.cnki.com.cn/article/cdmd-10003-2005036016.htm
   Google Scholar
• Zhang, X. (2011). Energy conversion characteristics of stainless steel stamping and welding centrifugal pumps and design method (Doctoral dissertation). Retrieved from http://cdmd.cnki.com.cn/Article/CDMD-10299-1011148352.htm
   Google Scholar
• Zhu, H., & Shouqi, Y. (2006). Optimal design of inlet conduit for technical innovation of large pumping stations. Journal of Hydroelectric Engineering, 25(2), 51–55. doi: 10.3969/j.issn.1003-1243.2006.02.011
   Google Scholar