Dynamic flow behavior and performance of a reactor coolant pump with distorted inflow

References

• Allen, M. E., Werth, D. E., & Allaben, C. C. (2014, June 1–5). Evaluation of reducing elbow characteristics versus velocity distribution at the pump inlet. American Society of Civil Engineers World Environmental and Water Resources Congress 2014, Portland, Oregon (pp.1207–1215).
   Google Scholar
• Bulten, N. W. H., & Esch, B. P. M. V. (2007). Fully transient CFD analyses of waterjet pumps. Marine Technology, 44(3), 185–193.
   Google Scholar
• Cheng, X. R., Bao, W. R., Fu, L., & Ye, X. T. (2016). Sensitivity analysis of nuclear main pump annular casing tongue blend. Advances in Mechanical Engineering, 9(7), 1–9. https://doi.org/10.1177/1687814017706599
   Web of Science ®Google Scholar
• Cheng, X. R., Wang, P., & Zhang, S. Y. (2019). Investigation on matching characteristics of nuclear main pump guide vanes and annular casing. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(9), 353. https://doi.org/10.1007/s40430-019-1854-0
   Web of Science ®Google Scholar
• Claus, K., Sven, B., Jochen, F., & Michael, T. C. (2005, June 19–23). Design process for an advanced reactor coolant pump for a 1400 MW nuclear power plant. ASME 2005 fluids engineering division summer meeting.
   Google Scholar
• Ding, Z. M., Zhuge, W. L., & Zhang, Y. J. (2019). Zhang, assessment of turbine performance under swirling inflow conditions. Energy, 168(1), 492–504. https://doi.org/10.1016/j.energy.2018.11.110
   Google Scholar
• Duerr, P., & Von Ellenrieder, K. D. (2015). Scaling and numerical analysis of non-uniform waterjet pump inflows. IEEE Journal of Oceanic Engineering, 40(3), 701–709. https://doi.org/10.1109/JOE.2014.2339395
   Web of Science ®Google Scholar
• Engeda, A., Kim, Y., Aungier, R., & Direnzi, G. (2003). The inlet flow structure of a centrifugal compressor stage and its influence on the compressor performance. Journal of Fluids Engineering, 125(5), 779–785. https://doi.org/10.1115/1.1601255
   Web of Science ®Google Scholar
• Esch, B. P. M. V. (2009). Performance and radial loading of a mixed-flow pump under non-uniform suction flow. Journal of Fluids Engineering, 131(5). https://doi.org/10.1115/1.3089539
   Web of Science ®Google Scholar
• Gan, H., & Gao, F. (2016). Non-dimensional analysis of the transient flow rate and the coolant temperature in a reactor coolant system under different pump failures. Journal of Nuclear Science and Technology, 53(12), 1–11. https://doi.org/10.1080/00223131.2016.1179136
   Web of Science ®Google Scholar
• Gunn, E. J., & Hall, C. A. (2014, June 16). Aerodynamics of boundary layer ingesting fans. ASME Turbo Expo 2014: turbomachinery technical conference and exposition.
   Google Scholar
• Gunn, E. J., & Hall, C. A. (2017, June 26). Non-axisymmetric stator design for boundary layer ingesting fans. ASME Turbo Expo 2017: turbomachinery technical conference and exposition.
   Google Scholar
• Gunn, E. J., Tooze, S. E., Hall, A. H., & Colin, Y. (2013). An experimental study of loss sources in a fan operating with continuous inlet stagnation pressure distortion. Journal of Turbomachinery, 135(5), 051002. https://doi.org/10.1115/1.4007835
   Web of Science ®Google Scholar
• Herrick, G. P. (2010). Effects of inlet distortion on aeromechanical stability of a forward-swept high-speed fan. AIAA paper, 69(59), 1–14. https://doi.org/10.2514/6.2010-6711
   Google Scholar
• Liu, C. Q., & Gao, Y. S. (2018). Rortex and comparison with eigenvalue-based vortex identification criteria. Physics of Fluids, 30(8), 085107. https://doi.org/10.1063/1.5040112 doi: 10.1063/1.5037430
   Web of Science ®Google Scholar
• Liu, C. Q., Gao, Y. S., Tian, S. L., & Dong, X. R. (2018). Rortex a new vortex vector definition and vorticity tensor and vector decompositions. Physics of Fluids, 30(3), 035103. https://doi.org/10.1063/1.5023001
   Web of Science ®Google Scholar
• Liu, M., Tan, L., & Cao, S. L. (2018). Influence of geometry of inlet guide vanes on pressure fluctuations of a centrifugal pump. Journal of Fluids Engineering, 140(9), 091204. https://doi.org/10.1115/1.4039714
   Web of Science ®Google Scholar
• Liu, J. M., Wang, Y. Q., Gao, Y. S., & Liu, C. Q. (2019). Galilean invariance of omega vortex identification method. Journal of Hydrodynamics, 31(2), 249–255. https://doi.org/10.1007/s42241-019-0024-2
   Web of Science ®Google Scholar
• Liu, C. Q., Wang, Y. Q., Yang, Y., & Duan, Z. W. (2016). New omega vortex identification method. Science China Physics, Mechanics & Astronomy, 59(8), 684711. https://doi.org/10.1007/s11433-016-0022-6
   Web of Science ®Google Scholar
• Long, Y., Wang, D. Z., & Zhu, Y. L. (2017). Experimental investigation on the unsteady pressure pulsation of reactor coolant pumps with non-uniform inflow. Annals of Nuclear Energy, 110, 501–510. https://doi.org/10.1016/j.anucene.2017.07.010
   Web of Science ®Google Scholar
• Long, Y., Zhu, R. S., & Wang, D. Z. (2016). Numerical and experimental investigation on the diffuser optimization of a reactor coolant pump with orthogonal test approach. Journal of Mechanical Science and Technology, 30(11), 4941–4948. https://doi.org/10.1007/s12206-016-1014-8
   Web of Science ®Google Scholar
• Lu, Y. G., Zhu, R. S., & Wang, X. L. (2017). Study on gas-liquid two-phase all-characteristics of CAP1400 nuclear main pump. Nuclear Engineering and Design, 319, 140–148. https://doi.org/10.1016/j.nucengdes.2017.05.001
   Web of Science ®Google Scholar
• Michelassi, V., Chen, L. W., Pichler, R., & Sandberg, R. D. (2015). Compressible direct numerical simulation of low-pressure turbines—part II: Effect of inflow disturbances. Journal of Turbomachinery, 137(7), 071005. https://doi.org/10.1115/1.4029126
   Web of Science ®Google Scholar
• Mittag, S., & Gabi, M. (2015). Experimental and numerical investigation of centrifugal pumps with asymmetric inflow conditions. Journal of Thermal Science, 24(6), 516–525. https://doi.org/10.1007/s11630-015-0817-8
   Web of Science ®Google Scholar
• Ni, D., Yang, M. G., Gao, B., & Zhang, N. (2017). Numerical study on the effect of the diffuser blade trailing edge profile on flow instability in a nuclear reactor coolant pump. Nuclear Engineering and Design, 322, 92–103. https://doi.org/10.1016/j.nucengdes.2017.06.042
   Web of Science ®Google Scholar
• Spalart, P. R., Deck, S., Shur, M. L., Squires, K. D., Strelets, M. K., & Travin, A. (2006). A new version of detached-eddy simulation, resistant to ambiguous grid densities. Theoretical and Computational Fluid Dynamics, 20(3), 181–195. https://doi.org/10.1007/s00162-006-0015-0
   Web of Science ®Google Scholar
• Sun, H., Li, J., & Feng, Z. (2012). Investigations on aerodynamic performance of turbine cascade at different flow conditions. Engineering Applications of Computational Fluid Mechanics, 6(2), 214–223. https://doi.org/10.1080/19942060.2012.11015416
   Web of Science ®Google Scholar
• Tao, R., Xiao, R. F., & Liu, W. C. (2018). Investigation of the flow characteristics in a main nuclear power plant pump with eccentric impeller. Nuclear Engineering and Design, 327, 70–81. https://doi.org/10.1016/j.nucengdes.2017.11.040
   Web of Science ®Google Scholar
• Tian, S. L., Gao, Y. S., Dong, X. R., & Liu, C. Q. (2017). A definitions of vortex vector and vortex. Journal of Fluid Mechanics, 849, 312–339. https://doi.org/10.1017/jfm.2018.406.
   Web of Science ®Google Scholar
• Vagnoli, S., & Verstraete, T. (2015). Urans analysis of the effect of realistic inlet distortions on the stall inception of a centrifugal compressor. Computers & Fluids, 116, 192–204. https://doi.org/10.1016/j.compfluid.2015.03.015
   Web of Science ®Google Scholar
• Wadia, A. R. (2011). Experimental investigation of a forward swept rotor in a multistage fan with inlet distortion. International Journal of Aerospace Engineering, 2011, 1–11. https://doi.org/10.1155/2011/941872
   Google Scholar
• Wang, Y. H., Wang, P. F., & Tan, X. H. (2018). Research on the non-uniform inflow characteristics of the canned nuclear coolant pump. Annals of Nuclear Energy, 115, 423–429. https://doi.org/10.1016/j.anucene.2018.02.007
   Web of Science ®Google Scholar
• Zemp, A., Kammerer, A., & Abhari, R. S. (2010). Unsteady computational fluid dynamics investigation on inlet distortion in a centrifugal compressor. Journal of Turbomachinery, 132(3), 031015. https://doi.org/10.1115/1.3147104
   Web of Science ®Google Scholar
• Zhang, F. Y., Wu, L., He, G. N., & Huang, W. (2017). R&D on ZH-65 steam generator of HPR1000. China Nuclear Power, 10(4), 494–498.
   Google Scholar
• Zhang, Y. C., Yang, M. G., Ni, D., Zhang, N., & Gao, B. (2018). Particle image velocimetry measurement of complex flow structures in the diffuser and spherical casing of a reactor coolant pump. Nuclear Engineering and Technology, 50(3), 368–378. https://doi.org/10.1016/j.net.2017.12.012
   Web of Science ®Google Scholar
• Zhao, E. L., Li, P. Z., Peng, X. J., & Zhao, W. B. (2018). Integrated experiment research of new steam generator. Atomic Energy Science and Technology, 52(5), 868–874. https://doi.org/10.7538/yzk.2018.52.05.0868
   Google Scholar
• Zhou, F. M., & Wang, X. F. (2017). The effects of blade stacking lean angle to 1400 MW canned nuclear coolant pump hydraulic performance. Nuclear Engineering and Design, 325, 232–244. https://doi.org/10.1016/j.nucengdes.2017.09.024
   Web of Science ®Google Scholar