Numerical and experimental study on the churning losses of 2D high-speed piston pumps

References

• Akbarian, E., Najafi, B., Jafari, M., Faizollahzadeh Ardabili, S., Shamshirband, S., & Chau, K. W. (2018). Experimental and computational fluid dynamics-based numerical simulation of using natural gas in a dual-fueled diesel engine. Engineering Applications of Computational Fluid Mechanics, 12(1), 517–534. https://doi.org/10.1080/19942060.2018.1472670
   Web of Science ®Google Scholar
• Alle, N., Hiremath, S. S., Makaram, S., Subramaniam, K., & Talukdar, A. (2016). Review on electro hydrostatic actuator for flight control. International Journal of Fluid Power, 17(2), 125–145. https://doi.org/10.1080/14399776.2016.1169743
   Web of Science ®Google Scholar
• Ding, C., Zhu, Y. H., Liu, L., Tong, C. W., & Ruan, J. (2019). Research on a novel flowmeter with parallel two-dimensional pistons as Its Metering Units. Ieee Access, 7, 110912–110927. https://doi.org/10.1109/access.2019.2933662
   Web of Science ®Google Scholar
• Enekes, C. P. (2012). Ausgewählte Maßnahmen zur Effizienzsteigerung von Axialkolbenmaschinen. Shaker.
   Google Scholar
• Ez Abadi, A. M., Sadi, M., Farzaneh-Gord, M., Ahmadi, M. H., Kumar, R., & Chau, K. W. (2020). A numerical and experimental study on the energy efficiency of a regenerative heat and Mass Exchanger utilizing the counter-flow Maisotsenko cycle. Engineering Applications of Computational Fluid Mechanics, 14(1), 1–12. https://doi.org/10.1080/19942060.2019.1617193
   Web of Science ®Google Scholar
• Ghalandari, M., Bornassi, S., Shamshirband, S., Mosavi, A., & Chau, K. W. (2019). Investigation of submerged structures’ flexibility on sloshing frequency using a boundary element method and finite element analysis. Engineering Applications of Computational Fluid Mechanics, 13(1), 519–528. https://doi.org/10.1080/19942060.2019.1619197
   Web of Science ®Google Scholar
• He-sheng, T. A. N. G., Yao-bao, Y. I. N., & Jing, L. I. (2014). Characteristics of clearance leakage and friction torque of slipper pair in axial piston pump. Journal of South China University of Technology (Natural Science Edition), 42(7), 74–79. https://doi.org/10.3969/j.issn.1000-565X.2014.07.012
   Google Scholar
• Hongchuan, D., Yu, Z., & Haisheng, Q. (2015). Kinematic analysis of swash plate axial piston pump based on adams simulation. Applied Mechanics and Materials, 741, 517–520. https://doi.org/10.4028/www.scientific.net/AMM.741.517
   Google Scholar
• Jang, D. S. (1997). Verlustanalyse an Axialkolbeneinheiten. Verlag Mainz.
   Google Scholar
• Jin, D. C., Ruan, J., Li, S., Meng, B., & Wang, L. F. (2019). Modelling and validation of a roller-cam rail mechanism used in a 2D piston pump. Journal of Zhejiang University-Science A, 20(3), 201–217. https://doi.org/10.1631/jzus.A1800085
   Web of Science ®Google Scholar
• Manring, N. D. (1996). Torque on the cylinder block of an axial-piston swash-plate type hydrostatic pump. Retrospective Theses and Dissertations. https://doi.org/10.31274/rtd-180813-10258
   Google Scholar
• Manring, N. D. (1998). The torque on the input shaft of an axial-piston swash-plate type hydrostatic pump. Journal of Dynamic Systems Measurement and Control-Transactions of the Asme, 120(1), 57–62. https://doi.org/10.1115/1.2801322
   Web of Science ®Google Scholar
• Manring, N. D. (1999). Friction forces within the cylinder bores of swash-plate type axial-piston pumps and motors. Journal of Dynamic Systems Measurement and Control-Transactions of the Asme, 121(3), 531–537. https://doi.org/10.1115/1.2802507
   Web of Science ®Google Scholar
• Manring, N. D., Mehta, V. S., Nelson, B. E., Graf, K. J., & Kuehn, J. L. (2013). Increasing the power density for axial-piston swash-plate type hydrostatic machines. Journal of Mechanical Design, 135(7), 071002. https://doi.org/10.1115/1.4023924
   Web of Science ®Google Scholar
• McCandlish, D., & Dorey, R. E. (1984). The mathematical modelling of hydrostatic pumps and motors. Proceedings of the Institution of Mechanical Engineers, Part B: Management and Engineering Manufacture, 198(3), 165–174. https://doi.org/10.1243/PIME_PROC_1984_198_062_02
   Google Scholar
• Olsson, H. (2003). Power losses in an axial piston pump used in industrial hydrostatic transmissions. Paper presented at the Eighth Scandinavian International Conference on fluid power, Tampere, Finland, May.
   Google Scholar
• Shang, L., & Ivantysynova, M. (2015). Port and case flow temperature prediction for axial piston machines. International Journal of Fluid Power, 16(1), 35–51. https://doi.org/10.1080/14399776.2015.1016839
   Web of Science ®Google Scholar
• Shentu, S., Ruan, J., Qian, J., Meng, B., Wang, L., & Guo, S. (2019). Study of flow ripple characteristics in an innovative two-dimensional fuel piston pump. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(10), 464. https://doi.org/10.1007/s40430-019-1973-7
   Web of Science ®Google Scholar
• Tang, H. S., Yin, Y. B., & Li, J. (2016). Thermal-structural coupling characteristics of axial piston pump slipper pair. Journal of Aerospace Power, 31(8), 1913–1920. https://doi.org/10.13224/j.cnki.jasp.2016.08.016
   Google Scholar
• Tong, X., Yezhou, X., & Jian, R. (2019). Two-dimensional piston pump: Principle, design, and testing for aviation fuel pumps. Chinese Journal of Aeronautics, https://doi.org/10.1016/j.cja.2019.05.006
   Web of Science ®Google Scholar
• Wu, S., Yu, B., Jiao, Z., Shang, Y., & Luk, P. C. K. (2017). Preliminary design and multi-objective optimization of electro-hydrostatic actuator. Proceedings of the Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering, 231(7), 1258–1268. https://doi.org/10.1177/0954410016654181
   Web of Science ®Google Scholar
• Ye, S. G., Zhang, J. H., Xu, B., Song, W., & Zhu, S. Q. (2019). Experimental studies of the vibro-acoustic characteristics of an axial piston pump under run-up and steady-state operating conditions. Measurement, 133, 522–531. https://doi.org/10.1016/j.measurement.2018.10.058
   Web of Science ®Google Scholar
• Zecchi, M., Mehdizadeh, A., & Ivantysynova, M. (2013). A novel approach to predict the steady state temperature in ports and case of swash plate type axial piston machines. In 13th Scandinavian International Conference on fluid power, Linköping, Swedenpp, June 3-5.
   Google Scholar
• Zhang, Y., Kang, C., Ji, Y., & Li, Q. (2019). Experimental and numerical investigation of flow patterns and performance of a modified Savonius hydrokinetic rotor. Renewable Energy, 141, 1067–1079. https://doi.org/10.1016/j.renene.2019.04.071
   Web of Science ®Google Scholar
• Zhang, J. H., Li, Y., Xu, B., Chen, X., & Pan, M. (2018). Churning losses analysis on the thermal-hydraulic model of a high-speed electro-hydrostatic actuator pump. International Journal of Heat and Mass Transfer, 127, 1023–1030. https://doi.org/10.1016/j.ijheatmasstransfer.2018.06.133
   Web of Science ®Google Scholar
• Zhang, J. H., Li, Y., Xu, B., Pan, M., & Lv, F. (2017). Experimental study on the influence of the rotating cylinder block and pistons on churning losses in axial piston pumps. Energies, 10(5), 662. https://doi.org/10.3390/en10050662
   Web of Science ®Google Scholar