References
- Abadi, A. M. E., Sadi, M., Farzaneh-Gord, M., Ahmadi, M. H., & Chau, K. W. (2020). A numerical and experimental study on the energy efficiency of a regenerative heat and mass exchanger utilizing the counter-flow maisotsenko cycle. Engineering Applications of Computational Fluid Mechanics, 14(1), 1–12. https://doi.org/10.1080/19942060.2019.1617193
- Aditya, P., & Prasad, B. (2018). Effect of wall surface roughness on condensation shock. International Journal of Thermal Science, 132, 435–445. https://doi.org/10.1016/j.ijthermalsci.2018.06.028
- Akbarian, E., Najafi, B., Jafari, M., Ardabili, S. F., & Chau, K. W. (2018). Experimental and cfd-based numerical simulation of using natural gas in a dual-fuelled diesel engine. Engineering Applications of Computational Fluid Mechanics, 12(1), 517–534. https://doi.org/10.1080/19942060.2018.1472670
- Bakhtar, F., Ebrahimi, M., & Bamkole, B. (1995). On the performance of a cascade of turbine rotor tip section blading in nucleating steam: Part 2: Wake traverses. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 209(33), 169–177. https://doi.org/10.1243/PIME_PROC_1995_209_140_02
- Bakhtar, F., Mashmoushy, H., & Buckley, J. R. (1997). On the performance of a cascade of turbine rotor tip section blading in wet steam part 1: Generation of wet steam of prescribed droplet sizes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 211(7), 519–529. https://doi.org/10.1243/0954406971521908
- Bakhtar, F., & Mohsin, R. (2014). A study of the throughflow of nucleating steam in a turbine stage by a time-marching method. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 228(5), 932–949. https://doi.org/10.1177/0954406213490873
- Baumann, K. (1912). Recent developments in steam turbine practice. Journal of the Institution of Electrical Engineers, 48(213), 768–842. https://doi.org/10.1049/jiee-1.1912.0035
- Bian, J., Cao, X., Yang, W., Guo, D., & Xiang, C. (2020). Prediction of supersonic condensation process of methane gas considering real gas effects. Applied Thermal Engineering, 164. https://doi.org/10.1016/j.applthermaleng.2019.114508
- Bian, J., Cao, X., Yang, W., Song, X., Xiang, C., & Gao, S. (2019). Condensation characteristics of natural gas in the supersonic liquefaction process. Energy, 168, 99–110. https://doi.org/10.1016/j.energy.2018.11.102
- Chandler, K., White, A. J., & Young, J. B. (2014). Non-equilibrium wet-steam calculations of unsteady low-pressure turbine flows. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 228(2), 143–152. https://doi.org/10.1177/0957650913511802
- Chen, Y., Hu, Y., & Zhang, S. (2019). Structure optimization of submerged water jet cavitating nozzle with a hybrid algorithm. Engineering Applications of Computational Fluid Mechanics, 13(1), 591–608. https://doi.org/10.1080/19942060.2019.1628106
- Dykas, S., Majkut, M., Smolka, K., & Strozik, M. (2018). An attempt to make a reliable assessment of the wet steam flow field in the de laval nozzle. Heat and Mass Transfer, 54(9), 2675–2681. https://doi.org/10.1007/s00231-018-2313-7
- Dykas, S., Majkut, M., Strozik, M., & Smolka, K. (2015). Losses estimation in transonic wet steam flow through linear blade cascade. Journal of Thermal Science, 24(2), 109–116. https://doi.org/10.1007/s11630-015-0762-6
- Gribin, V., Tishchenko, A., Tishchenko, V., Gavrilov, I., Khomiakov, S., & Popov, V. (2014). An experimental study of influence of the steam injection on the profile surface on the turbine nozzle cascade performance. Asme Turbo Expo: Turbine Technical Conference & Exposition. https://doi.org/10.1115/GT2014-27118
- Gyarmathy, G. (1982). The spherical droplet in gaseous carrier streams: Review and synthesis. Multiphase Science and Technology, 1(1-4), 99–279. https://doi.org/10.1615/MultScienTechn.v1.i1-4.20
- Han, X., Zeng, W., & Han, Z. (2019). Investigation of the comprehensive performance of turbine stator cascades with heating endwall fences. Energy, 174, 1188–1199. https://doi.org/10.1016/j.energy.2019.03.038
- Han, X., Zeng, W., & Han, Z. (2020). Investigating the dehumidification characteristics of the low-pressure stage with blade surface heating. Applied Thermal Engineering, 164. https://doi.org/10.1016/j.applthermaleng.2019.114538
- Han, X., Zeng, W., Han, Z., Li, P., & Qian, J. (2019). Effect of the nonaxisymmetric endwall on wet steam condensation flow in a stator cascade. Energy Science & Engineering, 7(2), 557–572. https://doi.org/10.1002/ese3.298
- Han, Z., Zeng, W., Han, X., & Xiang, P. (2018). Investigating the dehumidification characteristics of turbine stator cascades with parallel channels. Energies, 11(9), 2306. https://doi.org/10.3390/en11092306
- Hashemian, A., & Lakzian, E. (2020). On the application of isogeometric finite volume method in numerical analysis of wet-steam flow through turbine cascades. Computers & Mathematics with Applications, 79(6), 1687–1705. https://doi.org/10.1016/j.camwa.2019.09.025
- Hosseini, R., & Lakzian, E. (2020). Optimization volumetric heating in condensing steam flow by a novel method. Journal of Thermal Analysis and Calorimetry, 140(5), 2421–2433. https://doi.org/10.1007/s10973-019-09001-1
- Huang, L., & Young, J. B. (1996). An analytical solution for the Wilson point in homogeneously nucleating flows. Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences, 452(1949), 1459–1473. https://doi.org/10.1098/rspa.1996.0074
- Jiang, X., Lin, A., Malik, A., Chang, X., & Xu, Y. (2019). Numerical investigation on aerodynamic characteristics of exhaust passage with consideration of multi-factor components in a supercritical steam turbine. Applied Thermal Engineering, 162. https://doi.org/10.1016/j.applthermaleng.2019.114085
- Mahpeykar, M. R., Rad, E. A., & Teymourtash, A. R. (2014). Analytical investigation into simultaneous effects of friction and heating on a supersonic nucleating laval nozzle. Scientia Iranica, 21(5), 1700–1708.
- Mirhoseini, M. S., & Boroomand, M. (2017). Multi-objective optimization of hot steam injection variables to control wetness parameters of steam flow within nozzles. Energy, 141, 1027–1037. https://doi.org/10.1016/j.energy.2017.09.138
- Petr, V., & Kolovratnik, M. (2014). The assessment of the effect of binary homogeneous nucleation on wet steam energy loss in a low pressure steam turbine. Proceedings of the Institution of Mechanical Engineers Part A-Journal of Power and Energy, 228(5), 525–535. https://doi.org/10.1177/0957650914531947
- Qian, J., Gu, Q., Yao, H., & Zeng, W. (2019). Dielectric properties of wet steam based on a double relaxation time model. The European Physical Journal E, 42(2), 22. https://doi.org/10.1140/epje/i2019-11783-1
- Ramezanizadeh, M., Alhuyi Nazari, M., Ahmadi, M. H., & Chau, K. W. (2019). Experimental and numerical analysis of a nanofluidic thermosyphon heat exchanger. Engineering Applications of Computational Fluid Mechanics, 13(1), 40–47. https://doi.org/10.1080/19942060.2018.1518272
- Starzmann, J., Hughes, F. R., Schuster, S., White, A. J., Halama, J., Hric, V., Kolovratník, M., Lee, H., Sova, L., Št’astný, M., Grübel, M., Schatz, M., Vogt, D. M., Patel, Y., Patel, G., Turunen-Saaresti, T., Gribin, V., Tishchenko, V., Gavrilov, I., … Li, L. (2018). Results of the international wet steam modeling project. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power & Energy, 232(5), 550–570. https://doi.org/10.1177/0957650918758779
- Tang, Y., Liu, Z., Li, Y., Shi, C., & Lv, C. (2019). A combined pressure regulation technology with multi-optimization of the entrainment passage for performance improvement of the steam ejector in MED-TVC desalination system. Energy, 175, 46–57. https://doi.org/10.1016/j.energy.2019.03.072
- Tang, Y., Liu, Z., Li, Y., Wu, H., Zhang, X., & Yang, N. (2019). Visualization experimental study of the condensing flow regime in the transonic mixing process of desalination-oriented steam ejector. Energy Conversion and Management, 197. https://doi.org/10.1016/j.enconman.2019.111849
- Vatanmakan, M., Lakzian, E., & Mahpeykar, M. R. (2018). Investigating the entropy generation in condensing steam flow in turbine blades with volumetric heating. Energy, 147, 701–714. https://doi.org/10.1016/j.energy.2018.01.097
- Wang, C., Wang, X., & Ding, H. (2018). Boundary layer of non-equilibrium condensing steam flow in a supersonic nozzle. Applied Thermal Engineering, 129, 389–402. https://doi.org/10.1016/j.applthermaleng.2017.10.015
- Wen, C., Karvounis, N., Wahher, J. H., Yan, Y., Feng, Y., & Yang, Y. (2019). An efficient approach to separate CO2 using supersonic flows for carbon capture and storage. Applied Energy, 238, 311–319. https://doi.org/10.1016/j.apenergy.2019.01.062
- White, A. J., & Hounslow, M. J. (2000). Modelling droplet size distributions in polydispersed wet-steam flows. International Journal of Heat and Mass Transfer, 43(11), 1873–1884. https://doi.org/10.1016/S0017-9310(99)00273-2
- White, A. J., Young, J. B., & Walters, P. T. (1996). Experimental validation of condensing flow theory for a stationary cascade of steam turbine blades. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 354(1704), 59–88. https://doi.org/10.1098/rsta.1996.0003
- Wölk, J., Strey, R., Heath, C. H., & Wyslouzil, B. E. (2002). Empirical function for homogeneous water nucleation rates. The Journal of Chemical Physics, 117(10), 4954–4960. https://doi.org/10.1063/1.1498465
- Yang, B., Xiang, Y., Cai, X., Zhou, W., Liu, H., Li, S., Gao, W. (2017). Simultaneous measurements of fine and coarse droplets of wet steam in a 330 MW steam turbine by using imaging method. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, 231(3), 161–172. https://doi.org/10.1177/0957650916685910
- Yang, Y., Zhu, X., Yan, Y., Ding, H., & Wen, C. (2019). Performance of supersonic steam ejectors considering the nonequilibrium condensation phenomenon for efficient energy utilisation. Applied Energy, 242, 157–167. https://doi.org/10.1016/j.apenergy.2019.03.023
- Young, J. B. (1992). Two-dimensional, nonequilibrium, wet-steam calculations for nozzles and turbine cascades. Journal of Turbomachinery, 114(3), 569–579. https://doi.org/10.1115/1.2929181
- Zhang, G., Dykas, S., Yang, S., Zhang, X., & Wang, J. (2020). Optimization of the primary nozzle based on a modified condensation model in a steam ejector. Applied Thermal Engineering, 171. https://doi.org/10.1016/j.applthermaleng.2020.115090
- Zhang, G., Wang, F., Wang, D., Wu, T., Qin, X., & Jin, Z. (2019). Numerical study of the dehumidification structure optimization based on the modified model. Energy Conversion and Management, 181, 159–177. https://doi.org/10.1016/j.enconman.2018.12.001
- Zhang, G., Zhang, X., Wang, D., Jin, Z., & Qin, X. (2019). Performance evaluation and operation optimization of the steam ejector based on modified model. Applied Thermal Engineering, 163. https://doi.org/10.1016/j.applthermaleng.2019.114388