References
- Abed, A., Bouzidane, A., Thomas, M., & Zahloul, H. (2017). Performance characteristics of a three-pad hydrostatic squeeze film damper compensated with new electrorheological valve restrictors. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231(7), 889–899. https://doi.org/10.1177/1350650116683622
- Akbarian, E., Najafi, B., Jafari, M., Faizollahzadeh Ardabili, S., Shamshirband, S., & Chau, K. (2018). Experimental and computational fluid dynamics-based numerical simulation of using natural gas in a dual-fueled diesel engine. Engineering Applications of Computational Fluid Mechanics, 12(1), 517–534. https://doi.org/10.1080/19942060.2018.1472670
- Bangchun, W., Jialiu, G., Songbo, X., Zheng, W., Jun, Z., Wen, Z., Jiajun, Qiu, Q., Taiping, H., Zhengsong, Z., & Wei, G. (2000). Advanced rotor dynamics (1st ed.). China Machine Press.
- Boyaci, A. L., Lu, D., & Schweizer, B. (2015). Stability and bifurcation phenomena of Laval/Jeffcott rotors in semi-floating ring bearings. Nonlinear Dynamics, 79(2), 1535–1561. https://doi.org/10.1007/s11071-014-1759-5
- Changsheng, Z., & Xixuan, W. (1995). An experimental investigation on the effectiveness of advanced hybrid squeeze film damper. Journal of Vibration Engineering, 8(3), 281–285.
- Chen, H., Chen, Y., Hou, L., & Li, Z. (2014). Bifurcation analysis of rotor–squeeze film damper system with fluid inertia. Mechanism and Machine Theory, 81(8), 129–139. https://doi.org/10.1016/j.mechmachtheory.2014.07.002
- Chen, H., Hou, L., Chen, Y., & Yang, R. (2016). Dynamic characteristics of flexible rotor with squeeze film damper excited by two frequencies. Nonlinear Dynamics, 87(4), 1–19. https://doi.org/10.1007/s11071-016-3204-4
- Dresig, H., & Holzweißig, F. (2016). Maschinendynamik. Springer-Verlag Berlin Heidelberg.
- Ghalandari, M., Bornassi, S., Shamshirband, S., Mosavi, A., & Chau, K. W. (2019). Investigation of submerged structures’ flexibility on sloshing frequency using a boundary element method and finite element analysis. Engineering Applications of Computational Fluid Mechanics, 13(1), 519–528. https://doi.org/10.1080/19942060.2019.1619197
- Guan, X., Zhou, J., Jin, C., Xu, Y., & Cui, H. (2019). Influence of different operating conditions on centrifugal compressor surge control with active magnetic bearings. Engineering Applications of Computational Fluid Mechanics, 13(1), 824–832. https://doi.org/10.1080/19942060.2019.1639216
- Han, B., & Ding, Q. (2018). Forced responses analysis of a rotor system with squeeze film damper during flight maneuvers using finite element method. Mechanism and Machine Theory, 122, 233–251. https://doi.org/10.1016/j.mechmachthe-ory.2018.01.004
- Han, Z., Ding, Q., & Zhang, W. (2019). Dynamical analysis of an elastic ring squeeze film damper-rotor system. Mechanism and Machine Theory, 131, 406–419. https://doi.org/10.1016/j.mechmachtheory.2018.10.011
- Holmes, R. (1972). The non-linear performance of squeeze film bearings. Journal of Mechanical Engineering Science, 14(1), 74–77. https://doi.org/10.1243/JMES_JOUR_1972_014_011_02
- Hou, L., Chen, H., Chen, Y., Lu, K., & Liu, Z. (2019). Bifurcation and stability analysis of a nonlinear rotor system subjected to constant excitation and rub-impact. Mechanical Systems and Signal Processing, 125, 65–78. https://doi.org/10.1016/j.ymssp.2018.07.019
- Hou, L., Chen, Y., Fu, Y., Chen, H., Lu, Z., & Liu, Z. (2017). Application of the HB–AFT method to the primary resonance analysis of a dual-rotor system. Nonlinear Dynamics, 88(4), 2531–2551. https://doi.org/10.1007/s11071-017-3394-4
- Huang, J., & Wang, Y. (2020). Transient analysis for a twin spool rotor with squeeze-film dampers considering blade loss. Journal of Vibration Engineering & Technologies, 8(1), 95–104. https://doi.org/10.1007/s42417-018-0060-1
- Jeung, S. H. (2013). Performance of an open ends squeeze film damper operating with large amplitude orbital motions: Experimental analysis and assessment of the accuracy of the linearized force coefficients model. Master's thesis, Texas A&M University. http://hdl.handle.net/1969.1/151648.
- Jie, H., Yin, D., & Dayi, Z. (2006). Dynamic design method of elastic ring squeeze film damper. Journal of Beijing University of Aeronautics and Astronautics, 32(6), 649–653.
- Karimulla, S., Dutta, B. K., & Gouthaman, G. (2019). Experimental and analytical investigation of short squeeze-film damper (SFD) under circular-centered orbit (CCO) motion. Journal of Vibration Engineering & Technologies, 8, 215–224. https://doi.org/10.1007/s42417-019-00100-9
- Lei, C. (2006). Theoretical and experimental study on dynamic characteristics of combined elastic support-damper. Nanjing University of Aeronautics and Astronautics.
- Min, Z., Qihan, L., & Litang, Y. (1998). Study on vibration reduction and mechanism of an elastic ring damper(1). Gas Turbine Experiment and Research, 1(4), 19–23.
- Salih, S. Q., Aldlemy, M. S., Rasani, M. R., Ariffin, A. K., Ya, T. M. Y. S., Al-Ansari, N., Yaseen, Z. M., & Chau, K. W. (2019). Thin and sharp edges bodies-fluid interaction simulation using cut-cell immersed boundary method. Engineering Applications of Computational Fluid Mechanics, 13(1), 860–877. https://doi.org/10.1080/19942060.2019.1652209
- San Andrés, L., & Delgado, A. (2007). Identification of force coefficients in a squeeze film damper with a mechanical end seal—centered circular orbit tests. Journal of Tribology, 129(3), 660–668. https://doi.org/10.1115/1.2736708
- San Andrés, L., Jeung, S. H., & Bradlet, G. (2015). Dynamic forced performance of short length open-ends squeeze film damper with end grooves. In Proceedings of the 9th IFToMM International Conference on Rotor Dynamics.
- San Andres, L., & Vance, J. M. (1988). Effect of fluid inertia on the performance of squeeze film damper supported rotors. Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 110(1), 51–57. https://doi.org/10.1115/1.3240086
- Siew, C. C., Hill, M., & Holmes, R. (2002). Evaluation of various fluid-film models for use in the analysis of squeeze film dampers with a central groove. Tribology International, 35(8), 533–547. https://doi.org/10.1016/S0301-679X(02)00048-8
- Thomson, W. T. (1988). Theory of vibration with applications (3rd ed.). Prentice-Hall.
- Wang, B., Ding, Q., & Yang, T. (2019). Soft rotor and gas bearing system: Two-way coupled fluid-structure interaction. Journal of Sound and Vibration, 445, 29–43. https://doi.org/10.1016/j.jsv.2019.01.007
- Wang, X., Han, Z., Ding, Q., & Zhang, W. (2018). Influence of fluid inertia on dynamic characteristics of elastic ring squeeze film damper-rotor system. Journal of Aerospace Power, 33(12), 2981–2990. https://doi.org/10.13224/j.cnki.jasp.2018.12.019
- Wang, Z., Ning, X., Xiangyu, Y., Zhansheng, L., & Guanghui, Z. (2017). The dynamic characteristic analysis of elastic ring squeeze film damper by fluid-stru cture interaction approach. In Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition GT2017.
- Dai, X., & Wang, G. (1994). Analysis on stiffness of corrugated ring in a rotor-bearing support. Journal of Harbin Institute of Technology, 26(5), 40–43.
- Zhang, W., & Ding, Q. (2015). Elastic ring deformation and pedestal contact status analysis of elastic ring squeeze film damper. Journal of Sound and Vibration, 346, 314–327. https://doi.org/10.1016/j.jsv.2015.02.015
- Zhang, J., Ellis, J., & Roberts, J. B. (1993). Observations on the nonlinear fluid forces in short cylindrical squeeze film dampers. Journal of Tribology, 115(4), 692–698. https://doi.org/10.1115/1.2921695
- Zhou, H., Feng, G., Luo, G., Ai, Y., & Sun, D. (2014). The dynamic characteristics of a rotor supported on ball bearings with different floating ring squeeze film dampers. Mechanism and Machine Theory, 80, 200–213. https://doi.org/10.1016/j.mechmachtheory.2014.04.016
- Zhu, C. S., Robb, D. A., & Ewins, D. J. (2002). Analysis of the multiple-solution response of a flexible rotor supported on non-linear squeeze film dampers. Journal of Sound and Vibration, 252(3), 389–408. https://doi.org/10.1006/jsvi.2001.3910