References
- Ahlert, K. R. (1994). Effects of particle impingement angle and surface wetting on solid particle erosion of AISI 1018 steel. BUniversity of Tulsa.
- Arabnejad, H., Mansouri, A., Shirazi, S. A., & McLaury, B. S. (2015). Development of mechanistic erosion equation for solid particles. Wear, 332–333, 1044–1050. https://doi.org/10.1016/j.wear.2015.01.031
- Aslam Bhutta, M. M., Hayat, N., Bashir, M. H., Khan, A. R., Ahmad, K. N., & Khan, S. (2012). CFD applications in various heat exchangers design: A review. Applied Thermal Engineering, 32(Complete), 1–12. https://doi.org/10.1016/j.applthermaleng.2011.09.001
- Badr, H. M., Habib, M. A., Ben-Mansour, R., Said, S. A. M., & Al-Anizi, S. S. (2006). Erosion in the tube entrance region of an air-cooled heat exchanger. International Journal of Impact Engineering, 32(9), 1440–1463. https://doi.org/10.1016/j.ijimpeng.2005.01.008
- Badr, H. M., Habib, M. A., Ben-Mansour, R., & Said, S. A. M. (2005). Numerical investigation of erosion threshold velocity in a pipe with sudden contraction. Computers & Fluids, 34(6), 721–742. https://doi.org/10.1016/j.compfluid.2004.05.010
- Batalha Leoni, G., Suaiden Klein, T., & de Andrade Medronho, R. (2017). Assessment with computational fluid dynamics of the effects of baffle clearances on the shell side flow in a shell and tube heat exchanger. Applied Thermal Engineering, 112, 497–506. https://doi.org/10.1016/j.applthermaleng.2016.10.097
- Bitter, J. G. A. (1963a). A study of erosion phenomena part I. Wear, 6(1), 5–21. https://doi.org/10.1016/0043-1648(63)90003-6
- Bitter, J. G. A. (1963b). A study of erosion phenomena: Part II. Wear, 6(3), 169–190. https://doi.org/10.1016/0043-1648(63)90073-5
- Bremhorst, K., & Brennan, M. (2011). Investigation of shell and tube heat exchanger tube inlet wear by computational fluid dynamics. Engineering Applications of Computational Fluid Mechanics, 5(4), 566–578. https://doi.org/10.1080/19942060.2011.11015395
- Bremhorst, K., & Lai, J. C. S. (1979). The role of flow characteristics in corrosion-erosion of tube inlets in the inlet channel of shell and tube heat exchangers. Wear, 54(1), 87–100. https://doi.org/10.1016/0043-1648(79)90048-6
- Campos-Amezcua, A., Mazur, Z., Gallegos-Muñoz, A., Romero-Colmenero, A., Riesco-Ávila, J. M., & Medina-Flores, J. M. (2007). Numerical study of erosion due to solid particles in steam turbine blades. Numerical Heat Transfer, Part A: Applications, 53(6), 667–684. https://doi.org/10.1080/10407780701453933
- Chen, J., Wang, Y., Li, X., He, R., Han, S., & Chen, Y. (2015). Erosion prediction of liquid-particle two-phase flow in pipeline elbows via CFD–DEM coupling method. Powder Technology, 275, 182–187. https://doi.org/10.1016/j.powtec.2014.12.057
- Chen, Q., Xiong, T., Zhang, X., & Jiang, P. (2020). Study of the hydraulic transport of non-spherical particles in a pipeline based on the CFD-DEM. Engineering Applications of Computational Fluid Mechanics, 14(1), 53–69. https://doi.org/10.1080/19942060.2019.1683075
- Finnie, I. (1972). Some observations on the erosion of ductile metals. Wear, 19(1), 81–90. https://doi.org/10.1016/0043-1648(72)90444-9
- Gandhi, M. S., Ganguli, A. A., Joshi, J. B., & Vijayan, P. K. (2012). CFD simulation for steam distribution in header and tube assemblies. Chemical Engineering Research and Design, 90(4), 487–506. https://doi.org/10.1016/j.cherd.2011.08.019
- Gao, W., Li, Y., & Kong, L. (2016). Numerical investigation of erosion of tube sheet and tubes of a shell and tube heat exchanger. Computers & Chemical Engineering, 96, 115–127. https://doi.org/10.1016/j.compchemeng.2016.10.005
- Godson, L., Deepak, K., Enoch, C., Jefferson, B., & Raja, B. (2014). Heat transfer characteristics of silver/water nanofluids in a shell and tube heat exchanger. Archives of Civil and Mechanical Engineering, 14(3), 489–496. https://doi.org/10.1016/j.acme.2013.08.002
- Greifzu, F., Kratzsch, C., Forgber, T., Lindner, F., & Schwarze, R. (2016). Assessment of particle-tracking models for dispersed particle-laden flows implemented in OpenFOAM and ANSYS FLUENT. Engineering Applications of Computational Fluid Mechanics, 10(1), 30–43. https://doi.org/10.1080/19942060.2015.1104266
- Habib, M. A., Badr, H. M., Ben-Mansour, R., & Kabir, M. E. (2007). Erosion rate correlations of a pipe protruded in an abrupt pipe contraction. International Journal of Impact Engineering, 34(8), 1350–1369. https://doi.org/10.1016/j.ijimpeng.2006.07.007
- Habib, M. A., Badr, H. M., Ben-Mansour, R., & Said, S. A. M. (2004). Numerical calculations of erosion in an abrupt pipe contraction of different contraction ratios. International Journal for Numerical Methods in Fluids, 46(1), 19–35. https://doi.org/10.1002/fld.744
- Habib, M. A., Badr, H. M., Said, S. A. M., Ben-Mansour, R., & Al-Anizi, S. S. (2006). Solid-particle erosion in the tube end of the tube sheet of a shell-and-tube heat exchanger. International Journal for Numerical Methods in Fluids, 50(8), 885–909. https://doi.org/10.1002/fld.1083
- Habib, M. A., Ben-Mansour, R., Badr, H. M., Said, S. A. M., & Al-Anizi, S. S. (2005). Erosion in the tube entrance region of a shell and tube heat exchanger. International Journal of Numerical Methods for Heat and Fluid Flow, 15(2), 143–160. https://doi.org/10.1108/09615530510578429
- Huang, S., Su, X., & Qiu, G. (2015). Transient numerical simulation for solid-liquid flow in a centrifugal pump by DEM-CFD coupling. Engineering Applications of Computational Fluid Mechanics, 9(1), 411–418. https://doi.org/10.1080/19942060.2015.1048619
- Huminic, G., & Huminic, A. (2012). Application of nanofluids in heat exchangers: A review. Renewable and Sustainable Energy Reviews, 16(8), 5625–5638. https://doi.org/10.1016/j.rser.2012.05.023
- Karimi, S., Shirazi, S. A., & McLaury, B. S. (2017). Predicting fine particle erosion utilizing computational fluid dynamics. Wear, 376–377, 1130–1137. https://doi.org/10.1016/j.wear.2016.11.022
- Kesana, N. R., Grubb, S. A., McLaury, B. S., & Shirazi, S. A. (2013). Ultrasonic measurement of multiphase flow erosion patterns in a standard elbow. Journal of Energy Resources Technology, 135(3), 032905–032905. https://doi.org/10.1115/1.4023331
- Kesana, N. R., Throneberry, J. M., McLaury, B. S., Shirazi, S. A., & Rybicki, E. F. (2013). Effect of particle size and liquid viscosity on erosion in annular and slug flow. Journal of Energy Resources Technology, 136(1), 012901–012901. https://doi.org/10.1115/1.4024857
- Klein, U., Zunkel, A., & Eberle, A. (2014). Breakdown of heat exchangers due to erosion corrosion and fretting caused by inappropriate operating conditions. Engineering Failure Analysis, 43, 271–280. https://doi.org/10.1016/j.engfailanal.2014.03.019
- Kuźnicka, B. (2009). Erosion–corrosion of heat exchanger tubes. Engineering Failure Analysis, 16(7), 2382–2387. https://doi.org/10.1016/j.engfailanal.2009.03.026
- Laguna-Camacho, J. R., Vite-Torres, M., Gallardo-Hernández, E. A., & Vera-Cárdenas, E. E. (2013). Solid particle erosion on different metallic materials. In D. H. Pihtili (Ed.), Tribology in Engineering. InTech. https://doi.org/10.5772/51176.
- Lai, J. C. S., & Bremhorst, K. (1979). Control of corrosion-erosion of tube inlets of shell and tube heat exchangers. Wear, 54(1), 101–112. https://doi.org/10.1016/0043-1648(79)90049-8
- Lin, Z., Ruan, X., Zhu, Z., & Fu, X. (2014). Numerical study of solid particle erosion in a cavity with different wall heights. Powder Technology, 254, 150–159. https://doi.org/10.1016/j.powtec.2014.01.002
- Lin, Z., Zhang, Y., Li, Y., Li, X., & Zhu, Z. (2017). Prediction of particle distribution and particle impact erosion in inclined cavities. Powder Technology, 305, 562–571. https://doi.org/10.1016/j.powtec.2016.10.035
- Lindroos, M., Apostol, M., Kuokkala, V.-T., Laukkanen, A., Valtonen, K., Holmberg, K., & Oja, O. (2015). Experimental study on the behavior of wear resistant steels under high velocity single particle impacts. International Journal of Impact Engineering, 78(Supplement C), 114–127. https://doi.org/10.1016/j.ijimpeng.2014.12.002
- Lindroos, M., Ratia, V., Apostol, M., Valtonen, K., Laukkanen, A., Molnar, W., Holmberg, K., & Kuokkala, V.-T. (2015). The effect of impact conditions on the wear and deformation behavior of wear resistant steels. Wear, 328–329(Supplement C), 197–205. https://doi.org/10.1016/j.wear.2015.02.032
- Liu, X.-y., Zhang, J.-z., & Shan, Y. (2017). Investigation of the pressure drop inside a rectangular channel with a built-in U-shaped tube bundle heat exchanger. Engineering Applications of Computational Fluid Mechanics, 11(1), 96–110. https://doi.org/10.1080/19942060.2016.1245629
- López del Prá, C., Velasco, F. J. S., & Herranz, L. E. (2010). Aerodynamics of a Gas Jet entering the secondary side of a vertical shell-And-tube heat exchanger: Numerical analysis of anticipated severe accident SGTR conditions. Engineering Applications of Computational Fluid Mechanics, 4(1), 91–105. https://doi.org/10.1080/19942060.2010.11015301
- Mansouri, A., Arabnejad, H., Karimi, S., Shirazi, S. A., & McLaury, B. S. (2015). Improved CFD modeling and validation of erosion damage due to fine sand particles. Wear, 338–339, 339–350. https://doi.org/10.1016/j.wear.2015.07.011
- Mansouri, A., Arabnejad, H., Shirazi, S. A., & McLaury, B. S. (2015). A combined CFD/experimental methodology for erosion prediction. Wear, 332–333, 1090–1097. https://doi.org/10.1016/j.wear.2014.11.025
- Manzar, M. A., & Shah, S. N. (2009). Particle distribution and erosion during the flow of newtonian and non-newtonian slurries in straight and coiled pipes. Engineering Applications of Computational Fluid Mechanics, 3(3), 296–320. https://doi.org/10.1080/19942060.2009.11015273
- Menter, F., Kuntz, M., & Langtry, R. (2003). Ten years of industrial experience with the SST turbulence model. (Ed.), (Eds.). Proceedings of the 4th International Symposium on Turbulence, Heat and Mass Transfer.
- Molinari, J. F., & Ortiz, M. (2002). A study of solid-particle erosion of metallic targets. International Journal of Impact Engineering, 27(4), 347–358. https://doi.org/10.1016/S0734-743X(01)00055-0
- Naz, M. Y., Ismail, N. I., Sulaiman, S. A., & Shukrullah, S. (2015). Electrochemical and dry sand impact erosion studies on carbon steel. Scientific Reports, 5(1), 16583. https://doi.org/10.1038/srep16583
- Neilson, J. H., & Gilchrist, A. (1968). Erosion by a stream of solid particles. Wear, 11(2), 111–122. https://doi.org/10.1016/0043-1648(68)90591-7
- Njobuenwu, D. O., & Fairweather, M. (2012). Modelling of pipe bend erosion by dilute particle suspensions. Computers and Chemical Engineering, 42, 235–247. https://doi.org/10.1016/j.compchemeng.2012.02.006
- Oka, Y. I., Ohnogi, H., Hosokawa, T., & Matsumura, M. (1997). The impact angle dependence of erosion damage caused by solid particle impact. Wear, 203–204, 573–579. https://doi.org/10.1016/S0043-1648(96)07430-3
- Oka, Y. I., Okamura, K., & Yoshida, T. (2005). Practical estimation of erosion damage caused by solid particle impact: Part 1: Effects of impact parameters on a predictive equation. Wear, 259(1–6), 95–101. https://doi.org/10.1016/j.wear.2005.01.039
- Oka, Y. I., & Yoshida, T. (2005). Practical estimation of erosion damage caused by solid particle impact: Part 2: Mechanical properties of materials directly associated with erosion damage. Wear, 259(1–6), 102–109. https://doi.org/10.1016/j.wear.2005.01.040
- Parsi, M., Kara, M., Agrawal, M., Kesana, N., Jatale, A., Sharma, P., & Shirazi, S. (2017). CFD simulation of sand particle erosion under multiphase flow conditions. Wear, 376–377, 1176–1184. https://doi.org/10.1016/j.wear.2016.12.021
- Parsi, M., Najmi, K., Najafifard, F., Hassani, S., McLaury, B. S., & Shirazi, S. A. (2014). A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications. Journal of Natural Gas Science and Engineering, 21, 850–873. https://doi.org/10.1016/j.jngse.2014.10.001
- Peng, W., & Cao, X. (2016). Numerical prediction of erosion distributions and solid particle trajectories in elbows for gas–solid flow. Journal of Natural Gas Science and Engineering, 30, 455–470. https://doi.org/10.1016/j.jngse.2016.02.008
- Pereira, G. C., de Souza, F. J., & de Moro Martins, D. A. (2014). Numerical prediction of the erosion due to particles in elbows. Powder Technology, 261, 105–117. https://doi.org/10.1016/j.powtec.2014.04.033
- Postlethwaite, J., & Nešić, S. (2011). Erosion–corrosion in single- and multiphase flow. In R. W. Revie (Ed.), Uhlig's corrosion handbook (pp. 215–227). https://doi.org/10.1002/9780470872864.ch18.
- Prakash, S., Prabhakar, S., Kumar, M. S., & Annamalai, K. (2015). Design optimization of a heat exchanger header with inlet modifier. Journal of Chemical and Pharmaceutical Sciences, 7, 347–350. http://www.scopus.com/inward/record.url?eid=2-s2.0-84939446187&partnerID=40&md5=80332da18db6aa1ae9904bb1e1c230b0.
- Ramezanizadeh, M., Nazari, M. A., Ahmadi, M. H., & Chau, K.-w. (2019). Experimental and numerical analysis of a nanofluidic thermosyphon heat exchanger. Engineering Applications of Computational Fluid Mechanics, 13(1), 40–47. https://doi.org/10.1080/19942060.2018.1518272
- Selma, B., Désilets, M., & Proulx, P. (2014). Optimization of an industrial heat exchanger using an open-source CFD code. Applied Thermal Engineering, 69(1–2), 241–250. https://doi.org/10.1016/j.applthermaleng.2013.11.054
- Sugawara, K., Yoshikawa, H., & Ota, T. (2005). LES of turbulent separated flow and heat transfer in a symmetric expansion plane channel. Journal of Fluids Engineering, 127(5), 865–871. https://doi.org/10.1115/1.1988344
- Sun, B., Zhao, T., Li, L., Ren, Y.-y., & Li, W. (2019). Flow field uniformity analysis and structural optimization of coal pyrolysis heat exchanger. Engineering Applications of Computational Fluid Mechanics, 13(1), 417–425. https://doi.org/10.1080/19942060.2019.1602081
- Ternik, P. (2009). Planar sudden symmetric expansion flows and bifurcation phenomena of purely viscous shear-thinning fluids. Journal of Non-Newtonian Fluid Mechanics, 157(1–2), 15–25. https://doi.org/10.1016/j.jnnfm.2008.09.002
- Utikar, R., Darmawan, N., Tade, M., Li, Q., Evans, G., Glenny, M., & Pareek, V. (2010). Hydrodynamic simulation of cyclone separators. In H. W. Oh (Ed.), Computational fluid dynamics. InTech. https://doi.org/10.5772/7106.
- Uzi, A., Ben Ami, Y., & Levy, A. (2017). Erosion prediction of industrial conveying pipelines. Powder Technology, 309, 49–60. https://doi.org/10.1016/j.powtec.2016.12.087
- Versteeg, H. K., & Malalasekera, W. (2007). An introduction to computational fluid dynamics: The finite volume method. Pearson Education.
- Vieira, R. E., Mansouri, A., McLaury, B. S., & Shirazi, S. A. (2016). Experimental and computational study of erosion in elbows due to sand particles in air flow. Powder Technology, 288, 339–353. https://doi.org/10.1016/j.powtec.2015.11.028
- Wallace, M. S., Peters, J. S., Scanlon, T. J., Dempster, W. M., McCulloch, S., & Ogilvie, J. B., & American Society of Mechanical, E. (2000). CFD-Based Erosion Modelling of Multi-Orifice Choke Valves. (Ed.), (Eds.). Summer meeting, American Society of Mechanical Engineers; Fluids Engineering Division.
- Xu, L., Zhang, Q., Zheng, J., & Zhao, Y. (2016). Numerical prediction of erosion in elbow based on CFD-DEM simulation. Powder Technology, 302, 236–246. https://doi.org/10.1016/j.powtec.2016.08.050
- You, Y., Chen, Y., Xie, M., Luo, X., Jiao, L., & Huang, S. (2015). Numerical simulation and performance improvement for a small size shell-and-tube heat exchanger with trefoil-hole baffles. Applied Thermal Engineering, 89, 220–228. https://doi.org/10.1016/j.applthermaleng.2015.06.012
- Zhang, Y., Reuterfors, E. P., McLaury, B. S., Shirazi, S. A., & Rybicki, E. F. (2007). Comparison of computed and measured particle velocities and erosion in water and air flows. Wear, 263(1–6), 330–338. https://doi.org/10.1016/j.wear.2006.12.048