References
- Abadi, E., Sadi, A. M., Farzaneh-Gord, M., Ahmadi, M., Kumar, M. H., & Chau, R., & W, K. (2020). A numerical and experimental study on the energy efficiency of a regenerative heat and mass exchanger utilizing the counter-flow Maisotsenko cycle. Engineering Applications of Computational Fluid Mechanics, 14(1), 1–12. https://doi.org/https://doi.org/10.1080/19942060.2019.1617193
- Alemi, H., Nourbakhsh, S. A., Raisee, M., & Najafi, A. F. (2015). Development of new “multivolute casing” geometries for radial force reduction in centrifugal pumps. Engineering Applications of Computational Fluid Mechanics, 9(1), 1–11. https://doi.org/https://doi.org/10.1080/19942060.2015.1004787
- Barrio, R., Fernandez, J., Blanco, E., & Parrondo, J. (2011). Estimation of radial load in centrifugal pumps using computational fluid dynamics. European Journal of Mechanics B-Fluids, 30(3), 316–324. https://doi.org/https://doi.org/10.1016/j.euromechflu.2011.01.002
- Behr, T., Porreca, L., Mokulys, T., Kalfas, A. I., & Abhari, R. S. (2006). Multistage aspects and unsteady effects of stator and rotor clocking in an axial turbine with low aspect ratio blading. Journal of Turbomachinery-Transactions of the Asme, 128(1), 11–22. https://doi.org/https://doi.org/10.1115/1.2101855
- Chao, Q., Zhang, J. H., Xu, B., Huang, H. P., & Zhai, J. (2019). Effects of inclined cylinder ports on gaseous cavitation of high-speed electro-hydrostatic actuator pumps: A numerical study. Engineering Applications of Computational Fluid Mechanics, 13(1), 245–253. https://doi.org/https://doi.org/10.1080/19942060.2019.1576545
- Cheng, X., Li, Y., & Zhang, S. (2019). Effect of inlet sweepback angle on the cavitation performance of an inducer. Engineering Applications of Computational Fluid Mechanics, 13(1), 713–723. https://doi.org/https://doi.org/10.1080/19942060.2019.1640134
- Dash, N., Roy, A. K., & Kumar, K. (2018). Design and optimization of mixed flow pump impeller blades – A review. Materials Today-Proceedings, 5(2), 4460–4466. https://doi.org/https://doi.org/10.1016/j.matpr.2017.12.015
- Deng, J., Jin, L., Yi, R., Feng, J.-J., & Luo, X.-Q. (2016). Effect of clocking position of front guide vane on pulsation characteristic of pressure in centrifugal pump. Journal of Northwest A & F University. https://doi.org/https://doi.org/10.13207/j.cnki.jnwafu.2016.01.032
- Dieter, B., Sabine, A., & Jing, R. (2005). Investigation of the optimum clocking position in a two-stage axial turbine. International Journal of Rotating Machinery. https://doi.org/https://doi.org/10.1155/IJRM.2005.202
- Haldeman, C. W., Dunn, M., Barter, J. W., Green, B. R., & Bergholz, R. F. (2005). Experimental investigation of vane clocking in a one and one-half stage high pressure turbine. Journal of Turbomachinery-Transactions of the Asme, 127(3), 512–521. https://doi.org/https://doi.org/10.1115/1.1861915
- Jiang, W., Li, G., Liu, P.-F., & Fu, L. (2016). Numerical investigation of influence of the clocking effect on the unsteady pressure fluctuations and radial forces in the centrifugal pump with vaned diffuser. International Communications in Heat and Mass Transfer, 71, 164–171. https://doi.org/https://doi.org/10.1016/j.icheatmasstransfer.2015.12.025
- Key, N. L. (2014). Compressor vane clocking effects on embedded rotor performance. Journal of Propulsion and Power, 30(1), 246–248. https://doi.org/https://doi.org/10.2514/1.B34604
- Liu, H., Cui, J., Tan, M., Wu, X., & Xu, H. (2013). CFD calculation of clocking effect on centrifugal pump. Transactions of the Chinese Society of Agricultural Engineering, 29(14), 67–73. https://doi.org/https://doi.org/10.3969/j.issn.1002-6819.2013.14.009
- Menter, F. R. (1994). Two-equation eddy-viscosity turbulence models for engineering applications. AIAA Journal, 32(8), 1598–1605. https://doi.org/https://doi.org/10.2514/3.12149
- Munih, J., Hocevar, M., Petric, K., & Dular, M. (2020). Development of CFD-based procedure for 3d gear pump analysis. Engineering Applications of Computational Fluid Mechanics, 14(1), 1023–1034. https://doi.org/https://doi.org/10.1080/19942060.2020.1789506
- Pinto, R. N., Afzal, A., D’Souza, L. V., Ansari, Z., & Samee, A. D. M. (2017). Computational fluid dynamics in turbomachinery: A review of state of the art. Archives of Computational Methods in Engineering, 24(3), 467–479. https://doi.org/https://doi.org/10.1007/s11831-016-9175-2
- Qu, W., Tan, L., Cao, S., Wang, Y., & Xu, Y. (2016). Numerical investigation of clocking effect on a centrifugal pump with inlet guide vanes. Engineering Computations, 33(2), 465–481. https://doi.org/https://doi.org/10.1108/ec-12-2014-0259
- Ramezanizadeh, M., Alhuyi Nazari, M., Ahmadi, M. H., & Chau, K. W. (2019). Experimental and numerical analysis of a nanofluidic thermosyphon heat exchanger. Engineering Applications of Computational Fluid Mechanics, 13(1), 40–47. https://doi.org/https://doi.org/10.1080/19942060.2018.1518272
- Saren, V. E., Savin, N. M., Dorney, D. J., & Zacharias, R. M. (1998). Experimental and numerical investigation of unsteady rotor-stator interaction on axial compressor stage (with IGV) performance. Second international conference EAHE. https://doi.org/https://doi.org/10.1007/978-94-011-5040-8_27
- Shah, S. R., Jain, S. V., Patel, R. N., & Lakhera, V. J. (2013). CFD for centrifugal pumps: A review of the state-of-the-art. Chemical, Civil and Mechanical Engineering Tracks of 3rd Nirma University International Conference on Engineering (Nuicone2012), 51, (pp. 715–720).
- Shuai, Z.-J., Li, W.-Y., Zhang, X.-Y., Jiang, C.-X., & Li, F.-C. (2014). Numerical study on the characteristics of pressure fluctuations in an axial-flow water pump. Advances in Mechanical Engineering. https://doi.org/https://doi.org/10.1155/2014/565061
- Si, Q., Ali, A., Yuan, J., Fall, I., & Yasin, F. M. (2019). Flow-induced noises in a centrifugal pump: A review. Science of Advanced Materials, 11(7), 909–924. https://doi.org/https://doi.org/10.1166/sam.2019.3617
- Smith, N. R., & Key, N. L. (2013). Vane clocking effects on stall margin in a multistage compressor. Journal of Propulsion and Power, 29(4), 891–898. https://doi.org/https://doi.org/10.2514/1.B34636
- Staeding, J., Wulff, D., Kosyna, G., Becker, B., & Guemmer, V. (2012). An experimental investigation of stator clocking effects in a two-stage low-speed axial compressor. Proceedings of the Asme Turbo Expo 2011, 7, 1563–1574. https://doi.org/https://doi.org/10.1115/GT2011-45680
- Suh, J. W., Yang, H. M., Kim, Y. I., Lee, K. Y., Kim, J. H., Joo, W. G., & Choi, Y. S. (2019). Multi-objective optimization of a high efficiency and suction performance for mixed-flow pump impeller. Engineering Applications of Computational Fluid Mechanics, 13(1), 744–762. https://doi.org/https://doi.org/10.1080/19942060.2019.1643408
- Tan, M., He, X., Liu, H., Dong, L., & Wu, X. (2016). Design and analysis of a radial diffuser in a single-stage centrifugal pump. Engineering Applications of Computational Fluid Mechanics, 10(1), 500–511. https://doi.org/https://doi.org/10.1080/19942060.2016.1210027
- Tan, M., He, N., Liu, H., Wu, X., & Ding, J. (2016). Experimental test on impeller clocking effect in a multistage centrifugal pump. Advances in Mechanical Engineering, 8, 4. https://doi.org/https://doi.org/10.1177/1687814016644376
- Walker, G. J., & Oliver, A. R. (1972). The effect of interaction between wakes from blade rows in an axial flow compressor on the noise generated by blade interaction. Journal of Engineering for Gas Turbines & Power, 94(4), 241–248. https://doi.org/https://doi.org/10.1115/1.3445679
- Wang, W., Pei, J., Yuan, S., & Yin, T. (2018). Experimental investigation on clocking effect of vaned diffuser on performance characteristics and pressure pulsations in a centrifugal pump. Experimental Thermal and Fluid Science, 90, 286–298. https://doi.org/https://doi.org/10.1016/j.expthermflusci.2017.09.022