Study on leading-edge trenched holes arrangement under real turbine flow conditions

References

• Albert, J. E., & Bogard, D. G. (2013). Measurements of adiabatic film and overall cooling effectiveness on a turbine vane pressure side with a trench. Journal of Turbomachinery, 135(5), Article 051007. https://doi.org/https://doi.org/10.1115/1.4007820
   Google Scholar
• An, B., Liu, J., & Jiang, H. (2005). Numerical investigation of film cooling in an air cooled turbine stator. Journal of Engineering Thermophysics, 26(3), 405–408.
   Google Scholar
• Barigozzi, G., Franchini, G., Perdichizzi, A., & Ravelli, S. (2012). Effects of trenched holes on film cooling of a contoured endwall nozzle vane. Journal of Turbomachinery, 134(4), Article 041009. https://doi.org/https://doi.org/10.1115/1.4003658
   Google Scholar
• Bunker, R. S. (2002, June 3–6). Film cooling effectiveness due to discrete holes within a transverse surface slot. Proceedings of the ASME Turbo Expo 2002: Power for land, sea, and air. Amsterdam, The Netherlands. https://doi.org/https://doi.org/10.1115/GT2002-30178.
   Google Scholar
• Davidson, F. T., Dees, J. E., & Bogard, D. G. (2011, June 6–10). An experimental study of thermal barrier coatings and film cooling on an internally cooled simulated turbine vane. Proceedings of the ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. Vancouver, BC, Canada. https://doi.org/https://doi.org/10.1115/GT2011-46604.
   Google Scholar
• Dong, P. (2009). Research on conjugate heat transfer simulation of aero turbine engine air-cooled vane (Dissertation, Harbin Institute of Technology).
   Google Scholar
• Dorrington, J. R., Bogard, D. G., & Bunker, R. S. (2007, May 14–17). Film effectiveness performance for coolant holes imbedded in various shallow trench and crater depressions. Proceedings of the ASME Turbo Expo 2007: Power for land, sea, and air. Montreal, Canada. https://doi.org/https://doi.org/10.1115/GT2007-27992.
   Google Scholar
• Du, K., Song, L., Li, J., & Sunden, B. (2017). Effects of the layout of film holes near the vane leading edge on the endwall cooling and phantom cooling of the vane suction side surface. Numerical Heat Transfer, Part A: Applications, 71(9), 910–927. https://doi.org/https://doi.org/10.1080/10407782.2017.1326788
   Web of Science ®Google Scholar
• Elnady, T., Hassan, I., Kadem, L., & Lucas, T. (2013). Cooling effectiveness of shaped film holes for leading edge. Experimental Thermal and Fluid Science, 44, 649–661. https://doi.org/https://doi.org/10.1016/j.expthermflusci.2012.09.005
   Web of Science ®Google Scholar
• Ez Abadi, A. M., Sadi, M., Farzaneh-Gord, M., Ahmadi, M. H., Kumar, R., & Chau, K. (2020). A numerical and experimental study on the energy efficiency of a regenerative heat and mass exchanger utilizing the counter-flow Maisotsenko cycle. Engineering Applications of Computational Fluid Mechanics, 14(1), 1–12. https://doi.org/https://doi.org/10.1080/19942060.2019.1617193
   Web of Science ®Google Scholar
• Feuerstein, A., Knapp, J., Taylor, T., Ashary, A., Bolcavage, A., & Hitchman, N. (2008). Technical and economical aspects of current thermal barrier coating systems for gas turbine engines by thermal spray and EBPVD: A review. Journal of Thermal Spray Technology, 17(2), 199–213. https://doi.org/https://doi.org/10.1007/s11666-007-9148-y
   Web of Science ®Google Scholar
• Gao, Z., & Han, J. (2009). Influence of film-hole shape and angle on showerhead film cooling using PSP technique. Journal of Heat Transfer, 131(6), Article 061701. https://doi.org/https://doi.org/10.1115/1.3082413
   Google Scholar
• Gao, W., Yue, Z., Li, L., Zhao, Z., & Tong, F. (2017). Numerical simulation on film cooling with compound angle of blade leading edge model for gas turbine. International Journal of Heat and Mass Transfer, 115, 839–855. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2017.07.105
   Web of Science ®Google Scholar
• Harrison, K. L., Dorrington, J. R., Dees, J. E., Bogard, D. G., & Bunker, R. S. (2009). Turbine airfoil net heat flux reduction with cylindrical holes embedded in a transverse trench. Journal of Turbomachinery, 131(1), Article 011012. https://doi.org/https://doi.org/10.1115/1.2812967
   Google Scholar
• He, W., Deng, Q., Zhou, W., Gao, T., & Feng, Z. (2019). Film cooling and aerodynamic performances of a turbine nozzle guide vane with trenched cooling holes. Applied Thermal Engineering, 150, 150–163. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2019.01.002
   Web of Science ®Google Scholar
• Hou, R., Wen, F., Tang, X., Cui, T., & Wang, S. (2019). Improvement of film cooling performance by trenched holes on turbine leading-edge models. Numerical Heat Transfer, Part a: Applications, 76(3), 160–177. https://doi.org/https://doi.org/10.1080/10407782.2019.1627832
   Web of Science ®Google Scholar
• Hou, R., Wen, F., Wang, S., Luo, Y., & Tang, X. (2019). Large eddy simulation of the trenched film cooling hole with different compound angles and coolant inflow orientation effects. Applied Thermal Engineering, 163, 114397. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2019.114397
   Web of Science ®Google Scholar
• Hylton, L. D., Milhec, M. S., Turner, E. R., Nealy, D. A., & York, R. E. (1983). Analytical and experimental evaluation of the heat transfer distribution over the surface of turbine vanes (NASA-CR-168015). https://ntrs.nasa.gov/citations/19830020105.
   Google Scholar
• Islami, S. B., Tabrizi, S. P. A., & Jubran, B. A. (2007). Computational investigation of film cooling from trenched holes near the leading edge of a turbine blade. Numerical Heat Transfer, Part A: Applications, 53(3), 308–322. https://doi.org/https://doi.org/10.1080/10407780701564200
   Web of Science ®Google Scholar
• Khalatov, A. A., Panchenko, N. A., Borisov, I. I., & Severina, V. V. (2017). Numerical simulation of film cooling with a coolant supplied through holes in a trench. Journal of Engineering Physics and Thermophysics, 90(3), 637–643. https://doi.org/https://doi.org/10.1007/s10891-017-1610-1
   Web of Science ®Google Scholar
• Kim, Y. J., & Kim, S.-M. (2004). Influence of shaped injection holes on turbine blade leading edge film cooling. International Journal of Heat and Mass Transfer, 47(2), 245–256. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2003.07.008
   Web of Science ®Google Scholar
• Lee, K.-D., & Kim, K.-Y. (2014). Film cooling performance of cylindrical holes embedded in a transverse trench. Numerical Heat Transfer, Part A: Applications, 65(2), 127–143. https://doi.org/https://doi.org/10.1080/10407782.2013.826106
   Web of Science ®Google Scholar
• Li, H., Han, F., Ma, Y., Wang, H., Zhou, Z., & Tao, Z. (2019). Experimental investigation on the effects of rotation and the blowing ratio on the leading-edge film cooling of a twist turbine blade. International Journal of Heat and Mass Transfer, 129, 47–58. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2018.09.005
   Web of Science ®Google Scholar
• Li, S. J., Yang, S. F., & Han, J. C. (2014). Effect of coolant density on leading edge showerhead film cooling using the pressure sensitive paint measurement technique. Journal of Turbomachinery, 136(5), Article 051011. https://doi.org/https://doi.org/10.1115/1.4025225
   Google Scholar
• Liu, Z., Ye, L., Wang, C., & Feng, Z. (2014). Numerical simulation on impingement and film composite cooling of blade leading edge model for gas turbine. Applied Thermal Engineering, 73(2), 1432–1443. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2014.05.060
   Web of Science ®Google Scholar
• Liu, C., Zhu, H., Zhang, X., Xu, D., & Zhang, Z. (2014). Experimental investigation on the leading edge film cooling of cylindrical and laid-back holes with different radial angles. International Journal of Heat and Mass Transfer, 71, 615–625. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2013.12.050
   Web of Science ®Google Scholar
• Lu, Y., Dhungel, A., Ekkad, S. V., & Bunker, R. S. (2009). Effect of trench width and depth on film cooling from cylindrical holes embedded in trenches. Journal of Turbomachinery, 131(1), Article 011003. https://doi.org/https://doi.org/10.1115/1.2950057
   Google Scholar
• Lu, Y., Nasir, H., & Ekkad, S. V. (2005, June 6–9). Film cooling from a row of holes embedded in transverse slots. Proceedings of the ASME Turbo Expo 2005: Power for land, sea, and air. Reno, NV, USA. https://doi.org/https://doi.org/10.1115/GT2005-68598.
   Google Scholar
• Maikell, J., Bogard, D., Piggush, J., & Kohli, A. (2011). Experimental simulation of a film cooled turbine blade leading edge including thermal barrier coating effects. Journal of Turbomachinery, 133(1), Article 011014. https://doi.org/https://doi.org/10.1115/1.4000537
   Google Scholar
• Mouzon, B. D., Terrell, E. J., Albert, J. E., & Bogard, D. G. (2005, June 6–9). Net heat flux reduction and overall effectiveness for a turbine blade leading edge. Proceedings of the ASME Turbo Expo 2005: Power for land, sea, and air. Reno, NV, USA. https://doi.org/https://doi.org/10.1115/GT2005-69002.
   Google Scholar
• Nathan, M. L., Dyson, T. E., Bogard, D. G., & Bradshaw, S. D. (2014). Adiabatic and overall effectiveness for the showerhead film cooling of a turbine vane. Journal of Turbomachinery, 136(3), Article 031005. https://doi.org/https://doi.org/10.1115/1.4024680
   Google Scholar
• Polanka, M. D., Witteveld, V. C., & Bogard, D. G. (1999, June 7–10). Film cooling effectiveness in the showerhead region of a gas turbine vane: Part I – Stagnation region and near-pressure side. Proceedings of the ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition. Indianapolis, IN, USA. https://doi.org/https://doi.org/10.1115/99-GT-048.
   Google Scholar
• Ramezanizadeh, M., Alhuyi Nazari, M., Ahmadi, M. H., & Chau, K. (2019). Experimental and numerical analysis of a nanofluidic thermosyphon heat exchanger. Engineering Applications of Computational Fluid Mechanics, 13(1), 40–47. https://doi.org/https://doi.org/10.1080/19942060.2018.1518272
   Web of Science ®Google Scholar
• Ravi, D., & Parammasivam, K. (2019). Enhancing film cooling effectiveness in a gas turbine end-wall with a passive semi cylindrical trench. Thermal Science, 23(3), 2013–2023. https://doi.org/https://doi.org/10.2298/TSCI170412001R
   Web of Science ®Google Scholar
• Taslim, M. E., & Khanicheh, A. (2006). Experimental and numerical study of impingement on an airfoil leading edge with and without showerhead and gill film holes. Journal of Turbomachinery, 128(2), 310–320. https://doi.org/https://doi.org/10.1115/1.2137742
   Web of Science ®Google Scholar
• Turner, E. R., Wilson, M. D., Hylton, L. D., & Kaufman, R. M. (July 1/1985). Analytical and experimental evaluation of surface heat transfer distributions with leading edge showerhead film cooling (NASA-CR-174827). https://ntrs.nasa.gov/citations/19860012075.
   Google Scholar
• Waye, S. K., & Bogard, D. G. (2007). High-resolution film cooling effectiveness measurements of axial holes embedded in a transverse trench with various trench configurations. Journal of Turbomachinery, 129(2), 294–302. https://doi.org/https://doi.org/10.1115/1.2464141
   Web of Science ®Google Scholar
• Witteveld, V. C., Polanka, M. D., & Bogard, D. G. (1999, June 7–10). Film cooling effectiveness in the showerhead region of a gas turbine vane: Part II – Stagnation region and near-suction side. Proceedings of the ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition. Indianapolis, IN, USA. https://doi.org/https://doi.org/10.1115/99-GT-049.
   Google Scholar
• Ye, L., Liu, C., Liu, F., Yang, Y., & Zhu, H. (2020). Experimental study on heat transfer of leading edge film-cooling with counter-inclined cylindrical and laid-back holes. Journal of Heat Transfer, 142(6), Article 061801. https://doi.org/https://doi.org/10.1115/1.4046529
   Google Scholar
• York, W. D., & Leylek, J. H. (2002, June 3–6). Leading-edge film-cooling physics: Part I – Adiabatic effectiveness. Proceedings of the ASME Turbo Expo 2002: Power for land, sea, and air. Amsterdam, The Netherlands. https://doi.org/https://doi.org/10.1115/GT2002-30166.
   Google Scholar
• Zhang, L. J., & Pudupatty, R. (2000, May 8–11). The effects of injection angle and hole exit shape on turbine nozzle pressure side film cooling. Proceedings of the ASME Turbo Expro 2000: Power for land, sea, and air. Munich, Germany. https://doi.org/https://doi.org/10.1115/2000-GT-0247.
   Google Scholar
• Zhang, B., Zhu, H., Liu, C., & Wei, J. (2020). Experimental study on the film-cooling characteristics of the cylindrical holes embedded in sine-wave shaped trench. Journal of Engineering for Gas Turbines and Power, 142(10), Article 101003. https://doi.org/https://doi.org/10.1115/1.4048326
   Google Scholar