References
- Asim, T., Mishra, R., Oliveira, A., & Charlton, M. (2019). Effects of the geometrical features of flow paths on the flow capacity of a control valve trim. Journal of Petroleum Science and Engineering, 172, 124–138. https://doi.org/https://doi.org/10.1016/j.petrol.2018.09.050
- Chern, M. J., Hsu, P. H., Cheng, Y. J., Tseng, P. Y., & Hu, C. M. (2013). Numerical study on cavitation occurrence in globe valve. Journal of Energy Engineering, 139(1), 25–34. https://doi.org/https://doi.org/10.1061/(ASCE)EY.1943-7897.0000084
- Chern, M. J., Wang, C. H., Lu, G. T., Tseng, P. Y., Cheng, Y. J., Lin, C. A., & Hu, C. M. (2015). Design of cages in globe valve. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229(3), 476–484. https://doi.org/https://doi.org/10.1177/0954406214535387
- Gao, H., Lin, W., & Tsukiji, T. (2006). Investigation of cavitation near the orifice of hydraulic valves. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 220(4), 253–265. https://doi.org/https://doi.org/10.1243/09544100JAERO26
- Han, M., Liu, Y., Wu, D., Zhao, X., & Tan, H. (2017). A numerical investigation in characteristics of flow force under cavitation state inside the water hydraulic poppet valves. International Journal of Heat and Mass Transfer, 111, 1–16. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2017.03.100
- Jin, Z. J., Gao, Z. X., Qian, J. Y., Wu, Z., & Sunden, B. (2018). A parametric study of hydrodynamic cavitation inside globe valves. ASME J. Fluids Eng, 140(3), 031208. https://doi.org/https://doi.org/10.1115/1.4038090
- Jin, Z. J., Qiu, C., Jiang, C. H., Wu, J. Y., & Qian, J. Y. (2020). Effect of valve core shapes on cavitation flow through a sleeve regulating valve. Journal of Zhejiang University-SCIENCE A, 21(1), 1–14. https://doi.org/https://doi.org/10.1631/jzus.A1900528
- Li, J. Y., Gao, Z. X., Wu, H., & Jin, Z. J. (2020a). Numerical Investigation of methodologies for cavitation suppression inside globe valves. Applied Sciences, 10(16), 5541(1–13). https://doi.org/https://doi.org/10.3390/app10165541.
- Li, S., Li, C., Li, Z., Xu, X., Ye, C., & Zhang, W. (2020b). Design optimization and experimental performance test of dynamic flow balance valve. Eng. Appl. Comput. Fluid Mech, 14(1), 700–712. https://doi.org/https://doi.org/10.1080/19942060.2020.1756914
- Lin, Z., Ma, C., Xu, H., Li, X., Cui, B., & Zhu, Z. (2017). Numerical and experimental studies on hydrodynamic characteristics of sleeve regulating valves. Flow Measurement and Instrumentation, 53, 279–285. https://doi.org/https://doi.org/10.1016/j.flowmeasinst.2016.12.001
- Lisowski, E., & Filo, G. (2017). Analysis of a proportional control valve flow coefficient with the usage of a CFD method. Flow Measurement and Instrumentation, 53, 269–278. https://doi.org/https://doi.org/10.1016/j.flowmeasinst.2016.12.009
- Liu, X., Wu, Z., Li, B., Zhao, J., He, J., Li, W., Zhang, C., & Xie, F. (2020). Influence of inlet pressure on cavitation characteristics in regulating valve. Eng. Appl. Comput. Fluid Mech, 14(1), 299–310. https://doi.org/https://doi.org/10.1080/19942060.2020.1711811
- Mosavi, A., Shamshirband, S., Salwana, E., Chau, K. W., & Tah, J. H. (2019). Prediction of multi-inputs bubble column reactor using a novel hybrid model of computational fluid dynamics and machine learning. Eng. Appl. Comput. Fluid Mech, 13(1), 482–492. https://doi.org/https://doi.org/10.1080/19942060.2019.1613448
- Qian, J. Y., Gao, Z. X., Hou, C. W., & Jin, Z. J. (2019). A comprehensive review of cavitation in valves: Mechanical heart valves and control valves. Bio-Design and Manufacturing, 2(2), 119–136. https://doi.org/https://doi.org/10.1007/s42242-019-00040-z
- Qian, J. Y., Gao, Z. X., Li, W. Q., & Jin, Z. J. (2020a). Cavitation Suppression of bileaflet Mechanical heart valves. Cardiovasc. Eng. Tech, 11(6), 1–12. https://doi.org/https://doi.org/10.1007/s13239-020-00484-w
- Qian, J. Y., Hou, C. W., Mu, J., Gao, Z. X., & Jin, Z. J. (2020b). Valve core shapes analysis on flux through control valves in nuclear power plants. Nuclear Engineering and Technology, 52(10), 2173–2182. https://doi.org/https://doi.org/10.1016/j.net.2020.03.008
- Qian, J. Y., Wu, J. Y., Gao, Z. X., & Jin, Z. J. (2020c). Effects of throttling window on flow rate through feed-water valves. ISA Transactions, 104, 393–405. https://doi.org/https://doi.org/10.1016/j.isatra.2020.05.017
- Qian, J. Y., Wu, J. Y., Gao, Z. X., & Jin, Z. J. (2020d). Pilot pipe and damping orifice arrangements analysis of a Pilot-control globe valve. ASME J. Fluids Eng, 142(10), 101210(1–12). https://doi.org/https://doi.org/10.1115/1.4047533
- Qiu, C., Jiang, C. H., Zhang, H., Wu, J. Y., & Jin, Z. J. (2019). Pressure drop and cavitation analysis on sleeve regulating valve. Processes, 7(11), 829(1–16). https://doi.org/https://doi.org/10.3390/pr7110829.
- Ramezanizadeh, M., Alhuyi Nazari, M., Ahmadi, M. H., & Chau, K. W. (2019). Experimental and numerical analysis of a nanofluidic thermosyphon heat exchanger. Eng. Appl. Comput. Fluid Mech, 13(1), 40–47. https://doi.org/https://doi.org/10.1080/19942060.2018.1518272
- Saha, B. K., Peng, J., & Li, S. (2020). Numerical and experimental investigations of cavitation phenomena inside the Pilot stage of the deflector Jet servo-valve. IEEE Access, 8, 64238–64249. https://doi.org/https://doi.org/10.1109/ACCESS.2020.2984481
- Singh, D., Charlton, M., Asim, T., Mishra, R., Townsend, A., & Blunt, L. (2020). Quantification of additive manufacturing induced variations in the global and local performance characteristics of a complex multi-stage control valve trim. Journal of Petroleum Science and Engineering, 190, 107053(1–13). https://doi.org/https://doi.org/10.1016/j.petrol.2020.107053.
- Sun, X., Kim, H. S., Yang, S. D., Kim, C. K., & Yoon, J. Y. (2017). Numerical investigation of the effect of surface roughness on the flow coefficient of an eccentric butterfly valve. Journal of Mechanical Science and Technology, 31(6), 2839–2848. https://doi.org/https://doi.org/10.1007/s12206-017-0527-0
- Yaghoubi, H., Madani, S. A. H., & Alizadeh, M. (2018). Numerical study on cavitation in a globe control valve with different numbers of anti-cavitation trims. Journal of Central South University, 25(11), 2677–2687. https://doi.org/https://doi.org/10.1007/s11771-018-3945-y
- Yang, Q., Aung, N. Z., & Li, S. (2015). Confirmation on the effectiveness of rectangle-shaped flapper in reducing cavitation in flapper–nozzle pilot valve. Energy Conversion and Management, 98, 184–198. https://doi.org/https://doi.org/10.1016/j.enconman.2015.03.096
- Zwart, P. J., Gerber, A. G., & Belamri, T. (2004). A two-phase flow model for predicting cavitation dynamics. Proceedings of the fifth International conference on multiphase flow, Yokohama, Japan, May 30 to June 3, 2004.