Large-diameter single dowel joint: finite element modelling of a reinforced joint

References

• Bejtka, I. and Blass, H. 2005. Self-tapping screws as reinforcements in connections with dowel-type fasteners. Karlsruhe: Universität Karlsruhe.
   Google Scholar
• Blass, H. and Schälde, P. 2011. Ductility aspects of reinforced and non-reinforced timber joints. Engineering Structures. 33(11): 3018–3026. doi: 10.1016/j.engstruct.2011.02.001
   Web of Science ®Google Scholar
• Borri, A., Corradi, M. and Speranzini, E. 2013. Reinforcement of wood with natural fibers. Composites Part B: Engineering. 53: 1–8. doi: 10.1016/j.compositesb.2013.04.039
   Web of Science ®Google Scholar
• Chen, C. 1999. Mechanical behaviour of fiberglass reinforced timber joints. PhD Thesis, Swiss Federal Institute of technology, Lausanne, Switzerland.
   Google Scholar
• Crocetti, R., Axelson, M. and Sartoni, T. 2010. Strengthening of large-diameter single dowel joints. Lund, Sweden: SP Technical Research institute of Sweden.
   Google Scholar
• Dahl, K. 2009. Mechanical properties of clear wood of Norway Spruce. Tronheim, Norway: NTNU Tronheim.
   Google Scholar
• Danielsson, H. and Bjornsson, P. 2005. Strength and creep analysis of glued rubber foil timber joint. Lund, Sweden: Lund University.
   Google Scholar
• Dietsch, P. and Brandner, R. 2015. Self-tapping screws and threaded rods as reinforcement for structural timber elements – a state-of-the-art report. Construction and Building Materials. 97: 78–89. doi: 10.1016/j.conbuildmat.2015.04.028
   Web of Science ®Google Scholar
• Eberhardsteiner, J. 2002. Mechanisches berhalten von fichtenholz – experimentelle bestimmung der biaxialen festigkeitseigenshaften. Wien: Springer-Verlag Wien GmbH.
   Google Scholar
• Franke, S., Franke, B. and Harte, A. 2015. Failure modes and reinforcement techniques for timber beams – state of the art. Construction and Building Materials. 97: 2–13. doi: 10.1016/j.conbuildmat.2015.06.021
   Web of Science ®Google Scholar
• Gustafsson, J. 2007. Tests of full size rubber foil adhesive joint. Lund, Sweden: Structural Mechanics LTH.
   Google Scholar
• Haller, P. and Birk, T. 2006. Tailor made textile reinforcements for timber connection. In Proceedings of ninth World Conference on Timber Engineering, Portland, USA.
   Google Scholar
• Hansen, K. 2002. Mechanical properties of self-tapping screws and nails in wood. Canadian Journal of Civil Engineering. 29: 725–733. doi: 10.1139/l02-059
   Web of Science ®Google Scholar
• Hemmer, K. 1985. Versagensarten des Holzes der Weisstanne unter mehrassige Beanspruchung. Germany: University at Fridericiana.
   Google Scholar
• Hockey, B., Lam, F. and Prion, H. 2000. Truss plate reinforced bolted connections in parallel strand lumber. Canadian Journal of Civil Engineering. 27(6): 1150–1161. doi: 10.1139/l00-040
   Web of Science ®Google Scholar
• Klajmonova, K. and Lokaj, A. 2015. Round timber bolted joints reinforced with self-drilling screws. Procedia Engineering. 114: 263–270. doi: 10.1016/j.proeng.2015.08.067
   Google Scholar
• Kobel, P. 2011. Modelling of strengthened connections for large span timber structures. Lund, Sweden: Lund University.
   Google Scholar
• Lathuillière, D., Bléron, L., Descamps, T. and Bocquet, J.-F. 2015. Reinforcement of dowel type connections. Construction and Building Materials. 97: 48–54. doi: 10.1016/j.conbuildmat.2015.05.088
   Web of Science ®Google Scholar
• Mastschuch, R. 2000. Reinforced multiple bolt timber connections. Vancouver, Canada: University of British Columbia.
   Google Scholar
• Norris, C. 1962. Strength of orthotropic materials subjected to combined stresses, Report 1816, Madison, Wisconsin, Forest Products Laboratory, Forest Service U.S. Department of Agriculture.
   Google Scholar
• Quenneville, J.H. and Mohammad, M. 2000. Anti-check bolts as means of repair for damaged split ring connections. In Proceedings of sixth World Conference on Timber Engineering, Whistler, Canada.
   Google Scholar
• Schober, K.-U., Harte, A., Kliger, R., Jockwer, R., Xu, Q. and Chen, J.-F. 2015. FRP reinforcement of timber structures. Construction and Building Materials. 97: 106–118. doi: 10.1016/j.conbuildmat.2015.06.020
   Web of Science ®Google Scholar
• Soltis, L.A., Ross, R. and Windorski, D. 1998. Fiberglass-reinforced bolted wood connections. Forest Products Journal. 48(9): 63–67.
   Web of Science ®Google Scholar
• Steiger, R., Serrano, E., Stepinac, M., Rajcic, V., O’Neill, C., McPolin, D. and Widmann, R. 2015. Strengthening of timber structures with glued-in rods. Construction and Building Materials. 97: 90–105. doi: 10.1016/j.conbuildmat.2015.03.097
   Web of Science ®Google Scholar
• Tsai, S. and Wu, E. 1971. A general theory of strength for anisotropic materials. Journal of Composite Materials. 5: 58–80. doi: 10.1177/002199837100500106
   Web of Science ®Google Scholar
• Yang, H., Crocetti, R., Larsson, G. and Gustaffson, P. 2015. Experimental study of innovative connections for large span timber structures. In Proceedings of the IASS working groups 12 + 18 International Colloquium 2015, Tokyo, Japan.
   Google Scholar