References
- Alptekin E, Canakci M. 2008. Determination of the density and the viscosities of biodiesel–diesel fuel blends. Renew Energ. 33(12):2623–2630. doi: https://doi.org/10.1016/j.renene.2008.02.020
- Aminul Islam AKM, Yaakob Z, Anuar N, Osman M, Primandari SRP. 2015. Preparation of biodiesel from jatropha hybrid seed oil through two-step transesterification. Energ Sources Part A. 37(14):1550–1559.
- An H, Yang WM, Chou SK, Chua KJ. 2012. Combustion and emissions characteristics of diesel engine fueled by biodiesel at partial load conditions. Appl Energ. 99:363–371. doi: https://doi.org/10.1016/j.apenergy.2012.05.049
- Anh Tuan L, Minh Tuan P. 2009. Impacts of gasohol E5 and E10 on performance and exhaust emissions of in-used motorcycle and car: a case study in Vietnam. J Sci Technol. 73B:98–104.
- Bannikov MG, Tyrlovoy SI, Vasilev IP, Chattha JA. 2006. Investigation of the characteristics of the fuel injection pump of a diesel engine fuelled with viscous vegetable oil-diesel oil blends. P I Mech Eng D-J Aut. 220(6):787–792. doi: https://doi.org/10.1243/09544070JAUTO88
- Baumgarten C. 2006. Mixture formation in internal combustion engines. Berlin: Springer-Verlag.
- Bhale PV, Deshpande NV, Thombre SB. 2009. Improving the low temperature properties of biodiesel fuel. Renew Energ. 34(3):794–800. doi: https://doi.org/10.1016/j.renene.2008.04.037
- CEN. EN 14214:2008. 2010. Automotive fuels - fatty acid methyl esters (FAME) for diesel engines - requirements and test methods.
- Esteban B, Riba J-R, Baquero G, Rius A, Puig R. 2012. Temperature dependence of density and viscosity of vegetable oils. Biomass Bioenerg. 42:164–171. doi: https://doi.org/10.1016/j.biombioe.2012.03.007
- Fasina OO, Colley Z. 2008. Viscosity and specific heat of vegetable oils as a function of temperature: 35 C to 180 C. Int J Food Prop. 11(4):738–746. doi: https://doi.org/10.1080/10942910701586273
- Gao Y, Deng J, Li C, Dang F, Liao Z, Wu Z, Li L. 2009. Experimental study of the spray characteristics of biodiesel based on inedible oil. Biotechnol Adv. 27(5):616–624. doi: https://doi.org/10.1016/j.biotechadv.2009.04.022
- Hiroyasu H, Arai M, Tabata M. 1989. “Empirical equations for the Sauter mean diameter of a diesel spray.” SAE Technical Paper.
- Hoang AT. 2017. The performance of diesel engine fueled diesel oil in comparison with heated pure vegetable oils available in Vietnam. J Sust Dev. 10(2):93–103. doi: https://doi.org/10.5539/jsd.v10n2p93
- Hoang AT. 2018a. A design and fabrication of heat exchanger for recovering exhaust gas energy from small diesel engine fueled with preheated bio-oils. Int J Appl Eng Res. 13(7):5538–5545.
- Hoang AT. 2018b. Waste heat recovery from diesel engines based on organic rankine cycle. Appl Energ. 231:138–166. doi: https://doi.org/10.1016/j.apenergy.2018.09.022
- Hoang AT, Le AT. 2018. A review on deposit formation in the injector of diesel engines running on biodiesel. Energ Sources Part A. doi:10.1080/15567036.2018.1520342.
- Hoang AT, Nguyen VT. 2017. Emission characteristics of a diesel engine fuelled with preheated vegetable oil and biodiesel. Philippine J Sci. 146(4):475–482.
- Hoang AT, Noor MM, Pham XD. 2018. Comparative analysis on performance and emission characteristic of diesel engine fueled with heated coconut oil and diesel fuel. Int J Auto Mech Eng. 15(1):5110–5125. doi:10.15282/ijame.15.1.2018.16.0395.
- Hoang AT, Pham VV. 2018a. A study of emission characteristic, deposits, and lubrication oil degradation of a diesel engine running on preheated vegetable oil and diesel oil. Energ Sources Part A. doi:10.1080/15567036.2018.1520344.
- Hoang AT, Pham VV. 2018b. Impact of jatropha oil on engine performance, emission characteristics, deposit formation, and lubricating oil degradation. Combust Sci Technol. doi:10.1080/00102202.2018.1504292.
- Hoang TA, Van Le V. 2017. The performance of a diesel engine fueled with diesel oil, biodiesel and preheated coconut oil. Int J Renew Energ Dev. 6(1):1–7. doi: https://doi.org/10.14710/ijred.6.1.1-7
- Ioannou M, Papalambrou G, Kyrtatos NP, Dumele H, Diessner M. 2013. Evaluation of emission sensors for four-stroke marine diesel engines. J Mar Eng Technol. 12(3):20–29.
- Joshi RM, Pegg MJ. 2007. Flow properties of biodiesel fuel blends at low temperatures. Fuel. 86(1–2):143–151. Elsevier. doi: https://doi.org/10.1016/j.fuel.2006.06.005
- Krisnangkura K, Yimsuwan T, Pairintra R. 2006. An empirical approach in predicting biodiesel viscosity at various temperatures. Fuel. 85(1):107–113. doi: https://doi.org/10.1016/j.fuel.2005.05.010
- Langfitt Q, Haselbach L. 2016. Coupled oil analysis trending and life-cycle cost analysis for vessel oil-change interval decisions. J Mar Eng Technol. 15(1):1–8. doi: https://doi.org/10.1080/20464177.2015.1126468
- Lefebvre AH, McDonell VG. 2017. Atomization and sprays. Boca Raton (FL): CRC Press.
- Lin Y-C, Hsu K-H, Chen C-B. 2011. Experimental investigation of the performance and emissions of a heavy-duty diesel engine fueled with waste cooking oil biodiesel/ultra-low sulfur diesel blends. Energy. 36(1):241–248. doi: https://doi.org/10.1016/j.energy.2010.10.045
- Marengo E, Longo V, Bobba M, Robotti E, Zerbinati O, Di Martino S. 2009. Butene concentration prediction in ethylene/propylene/1-butene terpolymers by FT-IR spectroscopy through multivariate statistical analysis and artificial neural networks. John Wiley & Sons. Vol. 77. Elsevier.
- Montgomery DC, Peck EA, Geoffrey Vining G. 2006. Introduction to linear regression analysis. 3rd ed. New York: John Wiley & Sons.
- Pushparaj T, Ramabalan S, Arul Mozhi Selvan V. 2015. Performance evaluation and exhaust emission of a diesel engine fueled with CNSL biodiesel. Energ Sources Part A. 37(18):2013–2019. doi: https://doi.org/10.1080/15567036.2011.643343
- Raghavan V, Rajesh S, Parag S, Avinash V. 2009. Investigation of combustion characteristics of biodiesel and its blends. Combust Sci Technol. 181(6):877–891. doi: https://doi.org/10.1080/00102200902900409
- Rajagopal K, Bindu C, Prasad RBN, Ahmad A. 2016. The effect of fatty acid profiles of biodiesel on key fuel properties of some biodiesels and blends. Energ Sources Part A. 38(11):1582–1590. doi: https://doi.org/10.1080/15567036.2014.929758
- Riazi MR, Al-Otaibi GN. 2001. Estimation of viscosity of liquid hydrocarbon systems. Fuel. 80(1):27–32. doi: https://doi.org/10.1016/S0016-2361(00)00071-5
- Satyanarayana M, Muraleedharan C. 2011. Investigations on performance and emission characteristics of vegetable oil biodiesels as fuels in a single cylinder direct injection diesel engine. Energ Sources Part A. 34(2):177–186. doi: https://doi.org/10.1080/15567030903586014
- Silitonga AS, Mahlia TMI, Ong HC, Riayatsyah TMI, Kusumo F, Ibrahim H, Dharma S, Gumilang D. 2017. A comparative study of biodiesel production methods for reutealis trisperma biodiesel. Energ Sources Part A. 39(20):2006–2014. doi: https://doi.org/10.1080/15567036.2017.1399174
- Tat ME, Van Gerpen JH. 1999. The kinematic viscosity of biodiesel and Its blends with diesel fuel. J Am Oil Chem Soc. 76(12):1511–1513. doi: https://doi.org/10.1007/s11746-999-0194-0
- Tat ME, Van Gerpen JH. 2000. The specific gravity of biodiesel and its blends with diesel fuel. J Am Oil Chem Soc. 77(2):115–119. doi: https://doi.org/10.1007/s11746-000-0019-3
- Tate RE, Watts KC, Allen CAW, Wilkie KI. 2006. The viscosities of three biodiesel fuels at temperatures up to 300 C. Fuel. 85(7–8):1010–1015. doi: https://doi.org/10.1016/j.fuel.2005.10.015
- Tesfa B, Mishra R, Gu F, Powles N. 2010. Prediction models for density and viscosity of biodiesel and their effects on fuel supply system in CI engines. Renew Energ. 35(12):2752–2760. doi: https://doi.org/10.1016/j.renene.2010.04.026
- Tran VD, Le AT, Dong VH, Hoang AT. 2017. Methods of operating the marine engines by ultra-low sulfur fuel to aiming to satisfy MARPOLAnnex VI. Adv Nat Appl Sci. 11(12):34–40.
- Tuan LA, Tuyen PH, Tho VDS. 2017. Alternative fuels for internal combustion engine. Hanoi: Bach khoa Publishing House.
- Ullah F, Bano A, Nosheen A. 2014. Sustainable measures for biodiesel production. Energ Sources Part A. 36(23):2621–2628. doi: https://doi.org/10.1080/15567036.2011.572135
- Ushakov S, Valland H, Nielsen JB, Hennie E. 2013. Effects of high sulphur content in marine fuels on particulate matter emission characteristics. J Mar Eng Technol. 12(3):30–39.
- Work F. 2011. Development of multi-fuel, power dense engines for maritime combat craft. J Mar Eng Technol. 10(2):37–46. doi: https://doi.org/10.1080/20464177.2011.11020246
- Yamane K, Ueta A, Shimamoto Y. 2001. Influence of physical and chemical properties of biodiesel fuels on injection, combustin and exhaust emission characteristics in a direct injection compression ignition engine. Int J Engine Res. 2(4):249–261. doi: https://doi.org/10.1243/1468087011545460
- Yang C, He K, Xue Y, Li Y, Lin H, Sheng H. 2018. Factors affecting the cold flow properties of biodiesel: fatty acid esters. Energ Sources Part A: Recovery Util Environ Effects. 40(5):516–522. doi: https://doi.org/10.1080/15567036.2016.1176091
- Zacharewicz M, Kniaziewicz T. 2017. Modelling of the operating process in a marine diesel engine. J Mar Eng Technol. 16(4):193–199. doi: https://doi.org/10.1080/20464177.2017.1389516