System-based calibration of offshore Malaysia environmental action factors for the ISO 19902 PETRONAS offshore fixed platforms

References

• API. 2000. Recommended practice for planning designing and constructing fixed offshore platforms – working stress design, API RP 2A-WSD 21st Edition, December 2000. Errata and Supplement 1, December 2002; Errata and Supplement 3, October 2005; Errata and Supplement 3, March 2008.
   Google Scholar
• Cossa NJ, Potty NS, Liew MS. 2013. Development of partial environmental load factor for design of Tubular joints of offshore jacket platforms in Malaysia. Open Ocean Eng J. 6:8–15. doi: 10.2174/1874835X01306010008
   Google Scholar
• [CSA] Canadian Standards Association. 1989. General requirements, design criteria, the environment, and loads, part 1 of the Code for the design, Construction, and installation of fixed offshore structures, Preliminary standard S471-M1989. Rexdale (Toronto) (ON): Canadian Standards Associations.
   Google Scholar
• Efthymiou M, van de Graaf JW, Tromans PS, Hiness IM. 1996. Reliability based criteria for fixed steel offshore platforms. Proceedings of OMAE Conference, Florence.
   Google Scholar
• Eurocode 1. 1993. Eurocode1: basis of design and actions on structures. Part 1: basis of design. Annex 2: partial factor design: background. European Standard.
   Google Scholar
• ISO 19901-1. 2005. Petroleumand natural gas industries – specific requirements for offshore structures – Part 1: Metocean design and operating considerations. International Organization for Standardization.
   Google Scholar
• ISO 19901-1. 2015. Petroleum and natural gas industries – specific requirements for offshore structures – Part 1: Metocean design and operating considerations. International Organization for Standardization.
   Google Scholar
• ISO 19902. 2007. Fixed steel offshore structures. International Organization for Standardization.
   Google Scholar
• MMC Oil & Gas Engineering Sdn Bhd. 2014. Hazard curves using SEAFINE wave data only. Document No. PCSB-A-1881/WO005/RP/0003, Rev A, February 2014.
   Google Scholar
• Nichols NW, Khan R, Rahman AA, Akram MKB, Chen K. 2014. Load resistance factor design (LRFD) calibration of load factors for extreme storm loading in Malaysian waters. JMET J. 13(2):21–34.
   Google Scholar
• Nordic Committee for Building Structures. 1978. Recommendations for loading and safety regulations for structural design. NKB Report No. 36.
   Google Scholar
• Oceanweather. 2008. SEAMOS – south fine grid hindcast (SEAFINE). Kuala Lumpur, Malaysia: Oceanweather.
   Google Scholar
• Oceanweather. 2012. SEAFINE 3d currents – validation of HYCOM 3D current model. Kuala Lumpur, Malaysia: Oceanweather.
   Google Scholar
• Onoufriou T, Forbes VJ. 2001. Developments in structural system reliability assessments of fixed steel offshore platforms. Reliab Eng Syst Safety. 71. doi: 10.1016/S0951-8320(00)00095-8
   Web of Science ®Google Scholar
• Tarp-Johansen NJ. 2005. Partial safety factors and Characteristic values for combined extreme wind and wave load effects. J. Solar Energy Eng. 127. doi: 10.1115/1.1862259
   Web of Science ®Google Scholar
• Tromans PS, Vanderschuren L. 1995. Response based design conditions in the North Sea: application of a new method. Proceedings of 27th Offshore Technology Conference, Paper OTC 7683, Houston, TX.
   Google Scholar
• Tromans PS, Vanderschuren L. 2001. Extreme environmental load statistics in UK waters. UK HSE Offshore Technology Report 2000/066.
   Google Scholar
• UK Health & Safety Executive (HSE) Research Report 087. 2003. System-based calibration of Northwest European annex environmental load factor for the ISO fixed steel offshore structures code 19902. Joint Industry Project Report.
   Google Scholar
• University of Surrey. 1998. Development of a structural system reliability framework for offshore platforms. JIP: structural reliability analysis framework for fixed offshore platforms, Document No. JHA003.
   Google Scholar
• University of Surrey. 2000. A review of system reliability considerations for offshore structural assessment. JIP: structural reliability analysis framework for fixed offshore platforms, Document No. JHA002.
   Google Scholar
• Veritas DN. 1992. Structural reliability analysis of marine structures. DNV Classification Note No. 30.6.
   Google Scholar
• Wang L, Chen K, Bucknell JR. 2007. Structural reliability assessment of offshore platforms under hurricane events. San Diego (CA): OMAE 2007-29313.
   Google Scholar