References
- Angelakos, D., & Bentz, E. C. (2001). Effect of concrete strength and minimum stirrups on shear strength of large members. ACI Structural Journal, 98(3), 290–300. https://doi.org/10.1016/S0924-0136(01)00572-6.
- Baghi, H., & Barros, J. A. (2018). Design-oriented approach to predict shear strength of reinforced concrete beams. Structural Concrete, 19(1), 98–115. https://doi.org/10.1002/suco.201700095.
- Bresler, B., & Scordelis, A. C. (1963). Shear strength of reinforced concrete beams. ACI Journal, 60(1), 51–72.
- Broujerdian, V., Karimpour, H., & Alavikia, S. (2019). Predicting the shear behavior of reinforced concrete beams using non-linear fracture mechanics. International Journal of Civil Engineering, 17(5), 597–605. https://doi.org/10.1007/s40999-018-0336-6.
- Cao, S. (2001). Size effect and the influence of longitudinal reinforcement on the shear response of large reinforced concrete members. University of Toronto. 30–91.
- Cladera, A., & Marí, A. R. (2005). Experimental study on high-strength concrete beams failing in shear. Engineering Structures, 27(10), 1519–1527. https://doi.org/10.1016/j.engstruct.2005.04.010.
- Clark, A. P. (1951). Diagonal tension in reinforced concrete beams. ACI Journal, 48(10), 145–156.
- Elzanaty, A. H., Nilson, A. H., & Slate, F. O. (1986). Shear capacity of reinforced concrete beams using high strength concrete. ACI Journal, 83(2), 290–296.
- Frosch, R. J. (2000). Behavior of large-scale reinforced concrete beams with minimum shear reinforcement. ACI Structural Journal, 98(6), 814–820. https://doi.org/10.1016/S0304-3894(00)00228-4.
- Hsu, T. T. C., & Zhang, L. X. (1997). Nonlinear analysis of membrane elements by fixed-angle softened-truss model. ACI Structural Journal, 94(5), 483–492. https://doi.org/10.1021/la970368i.
- Jian, Z. (2004). Experimental study on mechanical behavior of reinforced concrete members of grade HRB500. Zhengzhou University. 36–42 (in chinese).
- Jianmin, Z. (2016). Experimental study on shear behavior of concrete beams with 500Mpa stirrups. Tongji University (Natural Science Edition), 44(1), 45–52. https://doi.org/10.11908/j.issn.0253-374x.2016.01.007.
- Johnson, M. K., & Ramirrez, J. A. (1989). Minimum shear reinforcement in beams with higher strength concrete. ACI Structural Journal, 86(4), 376–382.
- Juan, L. (2007). Experimental study on the behavior of oblique section of concrete beams with hrb500 stirrups. Hunan University. 12–36 (in chinese).
- Khatab, M. A., Ashour, A. F., Sheehan, T., & Lam, D. (2017). Experimental investigation on continuous reinforced SCC deep beams and comparisons with code provisions and models. Engineering Structures, 131, 264–274. https://doi.org/10.1016/j.engstruct.2016.11.005.
- Kong, P. Y. L. (1998). Shear strength of high performance concrete beams. ACI Structural Journal, 95(6), 677–688.
- Krefeld, W. J., & Thurstin, C. W. (1996). Studies of the shear and diagonal tension strength of simple supported reinforced concrete beams. ACI Journal, 63(4), 451–476.
- Lee, J. Y. (2008). Effect of longitudinal tensile reinforcement ratio and shear span-depth ratio on minimum shear reinforcement in beams. ACI Structural Journal, 105(2), 134–144. https://doi.org/10.4334/JKCI.2004.16.6.795.
- Lee, J. Y. (2010). Maximum shear reinforcement of reinforced concrete beams. ACI Structural Journal, 107(5), 580–588. https://doi.org/10.1002/stc.351.
- Lee, J. Y. (2011). Shear behavior of reinforced concrete beams with high-strength stirrups. ACI Structural Journal, 108(5), 620–629. https://doi.org/10.1109/CLEOE-EQEC.2009.5194697.
- Lee, J. Y. (2015). Shear behavior and diagonal crack width for reinforced concrete beams with high strength shear reinforcement. ACI Structural Journal, 112(3), 323–333. https://doi.org/10.14359/51687422.
- Lee, D. H., Kim, K. S., Han, S. J., Zhang, D., & Kim, J. (2018). Dual potential capacity model for reinforced concrete short and deep beams subjected to shear. Structural Concrete, 19(1), 76–85. https://doi.org/10.1002/suco.201700202.
- Mattock, A. H., & Wang, Z. (1984). Shear strength of reinforced concrete members subject to high axial compressive stress. ACI Journal, 81(3), 287–298.
- Moody, K. G., Viest, I. M., Elstner, R. C., & Hognestad, E. (1954). Shear strength of reinforced concrete beams: Part1: Test of simple beams. ACI Journal, 51(21), 317–332.
- Mphode, A. G. (1985). Shear tests of high and low strength concrete beams with stirrups. ACI Special Publication, 87, 179–196.
- Mphode, A. G. (1989). Use of stirrup effectiveness in shear design of concrete beams. ACI Structural Journal, 86(5), 541–545.
- Oh, J. K., & Shin, S. W. (2001). Shear strength of reinforced high-strength concrete deep beams. ACI Structural Journal, 98(2), 164–173. https://doi.org/10.1016/S0925-8388(00)01498-5.
- Ozcebe, G. (1999). Evaluation of minimum shear reinforcement requirements for high strength concrete. ACI Structural Journal, 96(3), 361–369. https://doi.org/10.1016/S0022-1694(99)00029-3.
- Pendyala, R. S. (2000). Experimental study on shear strength of high strength concrete beams. ACI Structural Journal, 97(4), 564–571. https://doi.org/10.1016/0076-6879(92)16015-C.
- Placas, A., Regan, P. E., & Baker, A. L. (1971). Shear failure of reinforced concrete beams. ACI Journal, 68(10), 763–773.
- Rahal, K. N. (2004). Minimum transverse reinforcement in 65MPa concrete beams. ACI Structural Journal, 101(6), 872–878. https://doi.org/10.1002/tal.256.
- Rajagopalan, K. S., & Ferguson, P. M. (1968). Exploratory shear tests emphasizing percentage of longitudinal steel. ACI Journal, 65(8), 634–638.
- Reineck, K. H. (2013). ACI-DAfStb database of shear tests on slender reinforced concrete beams without stirrups. ACI Structural Journal, 110(5), 867–875. https://doi.org/10.14359/51686819.
- Rooler, J. J. (1990). Shear strength of high strength concrete beams with web reinforcement. ACI Structural Journal, 87(2), 191–198. https://doi.org/10.1016/0921-5093(91)90353-O.
- Sarsam, K. F. (1992). Shear design of high and normal strength concrete beams with web reinforcement. ACI Structural Journal, 86(6), 658–664.
- Sherwood, E. G., & Bentz, E. C. (2007). Effect of aggregate size on beam-shear strength of thick slabs. ACI Structural Journal, 104(2), 180–190. https://doi.org/10.1002/stc.199.
- Shin, S. W. (1999). Shear strength of reinforced high strength concrete beams with shear span-to-depth rations between 1.5 and 2.5. ACI Structural Journal, 96(4), 549–556. https://doi.org/10.1007/BF02481640.
- Tan, K. H. (1997a). Effect of web reinforcement on high strength concrete deep beams. ACI Structural Journal, 94(5), 572–581. https://doi.org/10.1021/la970368i.
- Tan, K. H. (1997b). Main tension steel in high strength concrete deep and short beams. ACI Structural Journal, 94(6), 752–764. https://doi.org/10.1002/(SICI)1099-1794.
- Tan, K. H., & Kong, F. K. (1995). High-strength concrete deep beams with effective span and shear span variations. ACI Structural Journal, 92(4), 395–403. https://doi.org/10.1021/cen-v073n027.p024.
- Tompos, E. J., & Frosch, R. J. (2002). Influence of beam size, longitudinal reinforcement, and stirrup effectiveness on concrete shear strength. ACI Structural Journal, 99(5), 559–567.
- Vecchio, F. J., & Shim, W. (2004). Experimental and analytical reexamination of classic concrete beam tests. Journal of Structural Engineering, 130(3), 460–469. https://doi.org/10.1061/(asce)0733-9445(2004)130:3(460).
- Weijian, Y. (2009). Shear test of high strength stirrups and high strength concrete beams. Journal of Building Structures, 30(4), 94–101. https://doi.org/10.19701/j.jzjg.2009.s2.039.
- Weijian, Y. (2012). Experimental study on shear behavior of HRB500 grade reinforced concrete beams. Civil Engineering Journal, 45(4), 56–62. https://doi.org/10.15951/j.tmgcxb.2012.04.014.
- Xian guo, Y. (2012). Experimental study on shear behavior of hrbf500 reinforced C100 concrete beams. Industrial Buildings, 42(7), 86–90. https://doi.org/10.13204/j.gyjz2012.11.016.
- Xian guo, Y. (2013). Experimental study on shear resistance of high strength reinforced high strength concrete simply supported beams. Building Structures, 143(8), 48–50. https://doi.org/10.19701/j.jzjg.2013.08.012.
- Xie, Y. L. (1994). Shear ductility of reinforced concrete beams of normal and high strength concrete. ACI Structural Journal, 91(2), 140–149. https://doi.org/10.1016/0045-7949(94)90429-4.
- Yoon, Y. S. (1993). Minimum shear reinforcement in normal, medium, and high strength concrete beams. ACI Structural Journal, 93(5), 576–584. https://doi.org/10.1021/la960370u.
- Yoshida, Y. (2000). Shear reinforcement for large lightly reinforced concrete members. University of Toronto. 20–48.