Effect of fly ash/silica fume ratio and curing condition on mechanical properties of fiber-reinforced geopolymer

References

• Andrew RM. Global CO2 emissions from cement production. Earth Syst Sci Data. 2018;10:195–217.
   Web of Science ®Google Scholar
• Davidovits J. 2015. Geopolymer chemistry and applications. 4th ed. Geopolymer Institute. Saint-Quentin, France.
   Google Scholar
• Davidovits J. Geopolymers. J Thermal Anal. 1991;37:1633–1656.
   Web of Science ®Google Scholar
• Duxson P, Fernández-Jiménez A, Provis JL, et al. Geopolymer technology: the current state of the art. J Mater Sci. 2007;42:2917–2933.
   Web of Science ®Google Scholar
• Chindaprasirt P, Chareerat T, Sirivivatnanon V. Workability and strength of coarse high calcium fly ash geopolymer. Cement Concrete Comp. 2007;29:224–229.
   Web of Science ®Google Scholar
• Borges PHR, Banthia N, Alcamand HA, et al. Performance of Blended Metakaolin/Blastfurnace Slag Alkali-activated Mortars. Cement Concrete Comp. 2016;71:42–52.
   Web of Science ®Google Scholar
• Tippayasam C, Balyore P, Thavorniti P, et al. Potassium alkali concentration and heat treatment affected metakaolin-based geopolymer. Constr Build Mater. 2016;104:293–297.
   Web of Science ®Google Scholar
• Pangdaeng S, Sata V, Aguiar JB, et al. Apatite formation on calcined kaolin–white Portland cement geopolymer. Mater Sci Eng: C. 2015;51:1–6.
   PubMed Web of Science ®Google Scholar
• Fan F, Liu Z, Xu G, et al. Mechanical and thermal properties of fly ash based geopolymers. Constr Build Mater. 2018;160:66–81.
   Web of Science ®Google Scholar
• Bhagath Singh GVP, Subramaniam KVL. Effect of active components on strength development in alkali-activated low calcium fly ash cements. J Sustain Cement-Based Mater. 2019;8:1–19.
   Web of Science ®Google Scholar
• Sata V, Sathonsaowaphak A, Chindaprasirt P. Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack. Cement Concrete Comp. 2012;34:700–708.
   Web of Science ®Google Scholar
• Sathonsaowaphak A, Chindaprasirt P, Pimraksa K. Workability and strength of lignite bottom ash geopolymer mortar. J Hazard Mater. 2009;168:44–50.
   PubMed Web of Science ®Google Scholar
• Kaur K, Singh J, Kaur M. Compressive strength of rice husk ash based geopolymer: The effect of alkaline activator. Constr Build Mater. 2018;169:188–192.
   Web of Science ®Google Scholar
• Sturm P, Gluth GJG, Brouwers HJH, et al. Synthesizing one-part geopolymers from rice husk ash. Constr Build Mater.. 2016;124:961–966.
   Web of Science ®Google Scholar
• Karthik A, Sudalaimani K, Vijaya Kumar CT. Investigation on mechanical properties of fly ash-ground granulated blast furnace slag based self curing bio-geopolymer concrete. Constr Build Mater.. 2017;149:338–349.
   Web of Science ®Google Scholar
• Saha S, Rajasekaran C. Enhancement of the properties of fly ash based geopolymer paste by incorporating ground granulated blast furnace slag. Constr Build Mater.. 2017;146:615–620.
   Web of Science ®Google Scholar
• Khan MZN, Shaikh FA, Hao Y, et al. Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash. Constr Build Mater.. 2016;125:809–820.
   Web of Science ®Google Scholar
• El-Hassan H, Ismail N. Effect of process parameters on the performance of fly ash/GGBS blended geopolymer composites. J Sustain Cement-Based Mater. 2018;7:122–140.
   Web of Science ®Google Scholar
• Yang T, Yao X, Zhang Z, et al. Mechanical property and structure of alkali-activated fly ash and slag blends. J Sustain Cement-Based Mater. 2012;1:167–178.
   Google Scholar
• Electricity Generating Authority of Thailand. EGAT Annual Report, Bangkok,Thailand; 2018.
   Google Scholar
•  Statistic on silica fume production in Thailand, Bangkok, Thailand; 2019.
   Google Scholar
• Bentur A, Mindess S. Fibre reinforced cementitious composites. 2nd ed. Florida, USA: CRC Press; 2006.
   Google Scholar
• Gopalaratnam VS, Shah SP, Batson G, et al. Fracture toughness of fiber reinforced concrete. ACI Mater J. 1991;88:339–353.
   Web of Science ®Google Scholar
• Balaguru P, Narahari R, Patel M. Flexural toughness of steel fiber reinforced concrete. ACI Mater J. 1992;89:541–546.
   Web of Science ®Google Scholar
• Banthia N, Trottier JF. Concrete reinforced with deformed steel fibers part II: toughness characterization. ACI Mater J. 1995;92:146–154.
   Web of Science ®Google Scholar
• Ganesan N, Indira PV, Santhakumar A. Engineering properties of steel fibre reinforced geopolymer concrete. Adv Concrete Constr. 2013;1:305–318.
   Google Scholar
• Deepa Raj S, Ruby Abraham N, Ganesan SD. Fracture Properties of Fibre Reinforced Geopolymer Concrete. Int J Sci Eng Res. 2013;4:75–80.
   Google Scholar
• Wongruk R, Songpiriyakij S, Sukontasukkul P, et al. Properties of Steel Fiber Reinforced Geopolymer. KEM.. 2015;659:143–148.
   Google Scholar
• Bhutta A, Farooq M, Borges PHR, et al. Influence of fiber inclination angle on bond-slip behavior of different alkali-activated composites under dynamic and quasi-static loadings. Cement Concrete Res. 2018;107:236–246.
   Web of Science ®Google Scholar
• Borges PHR, Bhutta A, Bavuzo LT, et al. The effect of the alkaline solution content on the mechanical properties of MK-based PVA fiber-reinforced geopolymers. J Silicate Based and Comp Mater (epitoanyag-JSBCM). 2017;69:15–20.
   Web of Science ®Google Scholar
• Borges PHR, Bhutta A, Bavuzo LT, et al. Effect of SiO2/Al2O3 molar ratio on mechanical behavior and capillary sorption of mk-based alkali-activated composites reinforced with PVA fibers. Mater Struct.. 2017;50:1–12.
   Web of Science ®Google Scholar
• Okoye FN, Prakash S, Singh NB. Durability of fly ash based geopolymer concrete in the presence of silica fume. J Cleaner Prod. 2017;149:1062–1067.
   Web of Science ®Google Scholar
• Adak D, Sarkar M, Mandal S. Structural performance of nano-silica modified fly-ash based geopolymer concrete. Constr Build Mater. 2017;135:430–439.
   Web of Science ®Google Scholar
• Dutta D, Thokchom S, Ghosh P, et al. Effect of silica fume additions on porosity of fly ash geopolymers. ARPN J Eng Appl Sci. 2010;5:74–79.
   Google Scholar
• Memon FA, Nuruddin MF, Shafiq N. Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete. Int J Miner Metall Mater. 2013;20:205–213.
   Google Scholar
• Phoo-Ngernkham T, Chindaprasirt P, Sata V, et al. The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured at ambient temperature. Materials & Design. 2014;55:58–65.
   Web of Science ®Google Scholar
• Chindaprasirt P, Silva PD, Sagoe-Crentsil K, et al. Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems. J Mater Sci. 2012;47:4876–4883.
   Web of Science ®Google Scholar
• Nimwinya E, Arjharn W, Horpibulsuk S, et al. A sustainable calcined water treatment sludge and rice husk ash geopolymer. J Cleaner Prod. 2016;119:128–134.
   Web of Science ®Google Scholar
• Phoo-Ngernkham T, Hanjitsuwan S, Damrongwiriyanupap N, et al. Effect of sodium hydroxide and sodium silicate solutions on strengths of alkali activated high calcium fly ash containing Portland cement. KSCE J Civ Eng.. 2017;21:2202–2210.
   Web of Science ®Google Scholar
• Tennakoon C, De Silva P, Sagoe-Crentsil K, et al. Influence and role of feedstock Si and Al content in Geopolymer synthesis. J Sustain Cement-Based Mater.. 2015;4:129–139.
   Web of Science ®Google Scholar
• Dombrowski K, Buchwald A, Weil M. The influence of calcium content on the structure and thermal performance of fly ash based geopolymers. J Mater Sci. 2007;42:3033–3043.
   Web of Science ®Google Scholar
• Songpiriyakij S, Kubprasit T, Jaturapitakkul C, et al. Compressive strength and degree of reaction of biomass- and fly ash-based geopolymer. Constr Build Mater.. 2010;24:236–240., Volume Issue Pages
   Web of Science ®Google Scholar
• Langan BW, Weng K, Ward MA. Effect of silica fume and fly ash on heat of hydration of Portland cement. Cement Concrete Res. 2002;32:1045–1051.
   Web of Science ®Google Scholar