Effect of pre-saturated lightweight sand on material properties of eco-friendly lightweight cementitious composites

References

• Victor CL, Leung Christopher KY. Steady‐state and multiple cracking of short random fiber composites. J Eng Mech. 1992;118(11):2246–2264.
   Google Scholar
• Li VC, Wu H-C. Conditions for pseudo strain-hardening in fiber reinforced brittle matrix composites. Appl Mech Rev. 1992;45(8):390–398.
   Google Scholar
• Zhou Y, Xi B, Sui L, et al. Development of high strain-hardening lightweight engineered cementitious composites: Design and performance. Cem Concr Compos. 2019;104:103370.
   Google Scholar
• Nematollahi B, Sanjayan J, Shaikh FUA. Matrix design of strain hardening fiber reinforced engineered geopolymer composite. Composites, Part B. 2016;89:253–265.
   Web of Science ®Google Scholar
• Ma H, Cai J, Lin Z, et al. CaCO3 whisker modified engineered cementitious composite with local ingredients. Constr Build Mater. 2017;151:1–8.
   Google Scholar
• Zhang Z, Yuvaraj A, Di J, et al. Matrix design of light weight, high strength, high ductility ECC. Constr Build Mater. 2019;210:188–197.
   Google Scholar
• Zhang Z, Yang F, Liu J-C, et al. Eco-friendly high strength, high ductility engineered cementitious composites (ECC) with substitution of fly ash by rice husk ash. Cem Concr Res. 2020;137:106200.
   Web of Science ®Google Scholar
• Yu J, Lin J, Zhang Z, et al. Mechanical performance of ECC with high-volume fly ash after Sub-elevated temperatures. Constr Build Mater. 2015;99:82–89.
   Google Scholar
• Zhang J, Gong C, Guo Z, et al. Engineered cementitious composite with characteristic of low drying shrinkage. Cem Concr Res. 2009;39(4):303–312.
   Google Scholar
• Wang Q, Zhang J, Ho JCM. Zeolite to improve strength-shrinkage performance of high-strength engineered cementitious composite. Constr Build Mater. 2020;234:117335.
   Google Scholar
• Ye B, Zhang Y, Han J, et al. Effect of water to binder ratio and sand to binder ratio on shrinkage and mechanical properties of high-strength engineered cementitious composite. Constr Build Mater. 2019;226:899–909.
   Google Scholar
• Kim YY, Fischer G, Li VC. Performance of bridge deck link slabs designed with ductile engineered cementitious composite. Aci Struct J. 2009;101(6):792–801.
   Google Scholar
• Qian S, Lepech MD, Kim YY, et al. Introduction of transition zone design for bridge deck link slabs using ductile concrete. Aci Struct J. 2009;106(1):96–105.
   Web of Science ®Google Scholar
• Hisseine OA, Soliman NA, Tolnai B. Z, et al. Nano-engineered ultra-high performance concrete for controlled autogenous shrinkage using nanocellulose. Cem Concr Res. 2020;137:106217.
   Web of Science ®Google Scholar
• Tazawa E-i, Miyazawa S, Kasai T. Chemical shrinkage and autogenous shrinkage of hydrating cement paste. Cem Concr Res. 1995;25(2):288–292.
   Google Scholar
• Zhang Z, Wong YC, Arulrajah A, et al. Reaction mechanism of alkali-activated brick clay mill residues. Constr Build Mater. 2022;341:127817.
   Google Scholar
• Beltzung F. Early chemical shrinkage due to dissolution and hydration of cement. Mater Struct. 2001;34(239):279–283.
   Google Scholar
• Lura P. Autogenous deformation and internal curing of concrete. OAI2003.
   Google Scholar
• Tazawa E-I, Miyazawa S. Influence of cement and admixture on autogenous shrinkage of cement paste. Cem Concr Res. 1995;25(2):281–287.
   Google Scholar
• Mao Y, Liu J, Shi C. Autogenous shrinkage and drying shrinkage of recycled aggregate concrete: a review. J Cleaner Prod. 2021;295:126435.
   Google Scholar
• Adesina A, Das S. Drying shrinkage and permeability properties of fibre reinforced alkali-activated composites. Constr Build Mater. 2020;251:119076.
   Web of Science ®Google Scholar
• Abouhouraira A, Ouali A, Elhammoumi O, et al. Effect of accelerated ageing by cyclic variations of temperature and humidity on shrinkage of concretes. Mater Today Proceed. 2020;31:S149–S155.
   Google Scholar
• Zhang H, She W, Li L, et al. Effect of temperature rising inhibitor on autogenous shrinkage of cement pastes. Constr Build Mater. 2019;220:329–339.
   Google Scholar
• Omikrine Metalssi O, Aït-Mokhtar A, Turcry P, et al. Consequences of carbonation on microstructure and drying shrinkage of a mortar with cellulose ether. Constr Build Mater. 2012;34:218–225.
   Web of Science ®Google Scholar
• Matsushita F, Aono Y, Shibata S. Calcium silicate structure and carbonation shrinkage of a tobermorite-based material. Cem Concr Res. 2004;34(7):1251–1257.
   Google Scholar
• Samouh H, Rozière E, Wisniewski V, et al. Consequences of longer sealed curing on drying shrinkage, cracking and carbonation of concrete. Cem Concr Res. 2017;95:117–131.
   Google Scholar
• Sun W, Chen H, Luo X, et al. The effect of hybrid fibers and expansive agent on the shrinkage and permeability of high-performance concrete. Cem Concr Res. 2001;31(4):595–601.
   Web of Science ®Google Scholar
• Pan Z, Zhu Y, Zhang D, et al. Effect of expansive agents on the workability, crack resistance and durability of shrinkage-compensating concrete with low contents of fibers. Constr Build Mater. 2020;259:119768.
   Google Scholar
• Park SH, Ryu GS, Koh KT, et al. Effect of shrinkage reducing agent on pullout resistance of high-strength steel fibers embedded in ultra-high-performance concrete. Cem Concr Compos. 2014;49:59–69.
   Google Scholar
• Gao S, Wang Z, Wang W, et al. Effect of shrinkage-reducing admixture and expansive agent on mechanical properties and drying shrinkage of engineered cementitious composite (ECC). Constr Build Mater. 2018;179:172–185.
   Google Scholar
• Van V-T-A, Rößler C, Bui D-D, et al. Rice husk ash as both pozzolanic admixture and internal curing agent in ultra-high performance concrete. Cem Concr Compos. 2014;53:270–278.
   Web of Science ®Google Scholar
• Gastaldini ALG, da Silva MP, Zamberlan FB, et al. Total shrinkage, chloride penetration, and compressive strength of concretes that contain clear-colored rice husk ash. Constr Build Mater. 2014;54:369–377.
   Web of Science ®Google Scholar
• Balapour M, Zhao W, Garboczi EJ, et al. Potential use of lightweight aggregate (LWA) produced from bottom coal ash for internal curing of concrete systems. Cem Concr Compos. 2020;105:103428.
   Google Scholar
• Liu J, Shi C, Farzadnia N, et al. Effects of pretreated fine lightweight aggregate on shrinkage and pore structure of ultra-high strength concrete. Constr Build Mater. 2019;204:276–287.
   Google Scholar
• Castro J, Keiser L, Golias M, et al. Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures. Cem Concr Compos. 2011;33(10):1001–1008.
   Google Scholar
• Rajabipour F, Sant G, Weiss J. Interactions between shrinkage reducing admixtures (SRA) and cement paste's pore solution. Cem Concr Compos. 2008;38(5):606–615.
   Google Scholar
• Bentz DP, Halleck PM, Grader AS, et al. Water movement during internal curing: Direct observation using X-ray microtomography. Concrete Int. 2006;28(10):39–45.
   Google Scholar
• Park JJ, Yoo DY, Kim SW, et al. Benefits of using expansive and shrinkage-reducing agents in UHPC for volume stability. Mag Concrete Res. 2014;66(14):745–750.
   Google Scholar
• Zhutovsky S, Kovler K, Bentur A. Influence of cement paste matrix properties on the autogenous curing of high-performance concrete. Cem Concr Compos. 2004;26(5):499–507.
   Google Scholar
• Soliman AM, Nehdi ML. Effects of shrinkage reducing admixture and wollastonite microfiber on early-age behavior of ultra-high performance concrete. Cem Concr Compos. 2014;46:81–89.
   Web of Science ®Google Scholar
• Chao-Lung H, Anh-Tuan BL, Chun-Tsun C. Effect of rice husk ash on the strength and durability characteristics of concrete. Constr Build Mater. 2011;25(9):3768–3772.
   Web of Science ®Google Scholar
• Babcock A, Taylor P. Impacts of Internal Curing on Concrete Properties, Concrete Overlays 2015.
   Google Scholar
• Ghourchian S, Wyrzykowski M, Lura P, et al. An investigation on the use of zeolite aggregates for internal curing of concrete. Constr Build Mater. 2013;40:135–144.
   Web of Science ®Google Scholar
• Hisseine OA, Tagnit-Hamou A. Nanocellulose for ecological nanoengineered strain-hardening cementitious composites incorporating high-volume ground-glass pozzolans. Cem Concr Compos. 2020;112:103662.
   Google Scholar
• Yu J, Leung CKY. Strength improvement of strain-hardening cementitious composites with ultrahigh-volume fly ash. J Mater Civ Eng. 2017;29(9):05017003.
   Google Scholar
• Medina JM, Sáez del Bosque IF, Frías M, et al. Design and properties of eco-friendly binary mortars containing ash from biomass-fuelled power plants. Cem Concr Compos. 2019;104:103372.
   Google Scholar
• Meng W, Khayat K. Effects of saturated lightweight sand content on key characteristics of ultra-high-performance concrete. Cem Concr Compos. 2017;101:46–54.
   Google Scholar
• Bentz, D.P. and Weiss, W.J., 2011. Internal curing: a 2010 state-of-the-art review (pp. 1–82). Gaithersburg: US Department of Commerce, National Institute of Standards and Technology.
   Google Scholar
• Ding Y, Yu J-t, Yu K-Q, et al. Basic mechanical properties of ultra-high ductility cementitious composites: from 40MPa to 120MPa. Compos Struct. 2018;185:634–645.
   Google Scholar
• T K, Lin Z, Li VC. On interface property characterizationand performance of fiber reinforced cementitious composites. J Concrete Sci Eng. 1999;1:173–184.
   Google Scholar
• Golias M, Castro J, Weiss J. The influence of the initial moisture content of lightweight aggregate on internal curing. Constr Build Mater. 2012;35:52–62.
   Web of Science ®Google Scholar
• Curosu I, Liebscher M, Mechtcherine V, et al. Tensile behavior of high-strength strain-hardening cement-based composites (HS-SHCC) made with high-performance polyethylene, aramid and PBO fibers. Cem Concr Compos. 2017;98:71–81.
   Google Scholar
• Yıldırım G, Keskin ÖK, Keskin SB, et al. A review of intrinsic self-healing capability of engineered cementitious composites: Recovery of transport and mechanical properties. Constr Build Mater. 2015;101:10–21.
   Google Scholar
• Deng H, Liao G. Assessment of influence of self-healing behavior on water permeability and mechanical performance of ECC incorporating superabsorbent polymer (SAP) particles. Constr Build Mater. 2018;170:455–465.
   Web of Science ®Google Scholar
• Zhang J, Han YD, Gao Y, et al. Integrative study on the effect of internal curing on autogenous and drying shrinkage of High-Strength concrete. Drying Technol. 2013;31(5):565–575.
   Web of Science ®Google Scholar
• Sun, H., Fu, W., Zhou, W. and Liu, Y., 2020. Effect of chemical shrinkage and temperature shrinkage on early cracking of recycled concrete. Asia-Pacific Journal of Chemical Engineering, 15, p.e2505.
   Google Scholar
• Han Y, Zhang J, Luosun Y, et al. Effect of internal curing on internal relative humidity and shrinkage of high strength concrete slabs. Constr Build Mater. 2014;61:41–49.
   Web of Science ®Google Scholar
• Assmann A, Reinhardt HW. Tensile creep and shrinkage of SAP modified concrete. Cem Concr Compos. 2014;58:179–185.
   Google Scholar
• Henkensiefken R, Bentz D, Nantung T, et al. Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions. Cem Concr Compos. 2009;31(7):427–437.
   Web of Science ®Google Scholar
• Schroefl C, Mechtcherine V, Vontobel P, et al. Sorption kinetics of superabsorbent polymers (SAPs) in fresh Portland cement-based pastes visualized and quantified by neutron radiography and correlated to the progress of cement hydration. Cem Concr Compos. 2015;75:1–13.
   Google Scholar
• Justs J, Wyrzykowski M, Winnefeld F, et al. Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio. J Therm Anal Calorim. 2014;115(1):425–432.
   Web of Science ®Google Scholar
• Gao X, Yu QL, Brouwers HJH. Characterization of alkali activated slag–fly ash blends containing nano-silica. Constr Build Mater. 2015;98:397–406.
   Web of Science ®Google Scholar
• Cyr M, Trinh M, Husson B, et al. Effect of cement type on metakaolin efficiency. Cem Concr Compos. 2014;64:63–72.
   Google Scholar
• Mo L, Zhang F, Deng M. Effects of carbonation treatment on the properties of hydrated fly ash-MgO-Portland cement blends. Constr Build Mater. 2015;96:147–154.
   Google Scholar
• Zhu H, Gou H, Zhou H, et al. Microscopic analysis of nano-modified fly ash by fluidized bed reactor-vapor deposition. Constr Build Mater. 2020;260:120434.
   Google Scholar
• Mehdipour I, Khayat KH. Enhancing the performance of calcium sulfoaluminate blended cements with shrinkage reducing admixture or lightweight sand. Cem Concr Compos. 2018;87:29–43.
   Google Scholar
• Nguyễn HH, Choi J-I, Kim H-K, et al. Mechanical properties and self-healing capacity of eco-friendly ultra-high ductile fiber-reinforced slag-based composites. Compos Struct. 2019;229:111401.
   Google Scholar
• Ke Y, Ortola S, Beaucour AL, et al. Identification of microstructural characteristics in lightweight aggregate concretes by micromechanical modelling including the interfacial transition zone (ITZ). Cem Concr Compos. 2010;40(11):1590–1600.
   Google Scholar