References
- Provis JL, Bernal SA. Geopolymers and related alkali-activated materials. Annu. Rev. Mater. Res. 2014;44(1):299–327.
- Roy DM. Alkali-activated cements opportunities and challenges. Cem Concr Res. 1999;29(2):249–254.
- Al Makhadmeh W, Soliman A. Effect of activator nature on property development of alkali-activated slag binders. J Sustain Cem Mater. 2021;10(4):240–256.
- Burciaga-Díaz O, Magallanes-Rivera RX, Escalante-García JI. Alkali-activated slag-metakaolin pastes: strength, structural, and microstructural characterization. J Sustain Cem Mater. 2013;2(2):111–127.
- Bilim C, Atiş CD. Alkali activation of mortars containing different replacement levels of ground granulated blast furnace slag. Constr Build Mater. 2012;28(1):708–712.
- Rakhimova NR, Rakhimov RZ. Reaction products, structure and properties of alkali-activated metakaolin cements incorporated with supplementary materials – a review. J Mater Res Technol. 2019;8(1):1522–1531.
- Oh JE, Monteiro PJM, Jun SS, et al. The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers. Cem Concr Res. 2010;40(2):189–196.
- Gruskovnjak A, Lothenbach B, Holzer L, et al. Hydration of alkali-activated slag: comparison with ordinary Portland cement. Adv Cem Res. 2006;18(3):119–128.
- Miller SA, Horvath A, Monteiro PJM. Impacts of booming concrete production on water resources worldwide. Nat Sustain. 2018;1(1):69–76.
- Jun Y, Kim JH, Han SH, et al. Influence of seawater on alkali-activated slag concrete. Mater Struct. 2021;54(3):121.
- Lv W, Sun Z, Su Z. Study of seawater mixed one-part alkali activated GGBFS-fly ash. Cem Concr Compos. 2020;106:103484.
- Krivenko P, Rudenko I, Konstantynovskyi O, et al. Prevention of steel reinforcement corrosion in alkali-activated slag cement concrete mixed with seawater. E3S Web Conf. Les Ulis. 2021;280:07004.
- Luukkonen T, Yliniemi J, Kinnunen P, et al. Sustainable batching water options for one-part alkali-activated slag mortar: Sea water and reverse osmosis reject water. PLoS One. 2020;15(11):e0242462.
- Cheewaket T, Jaturapitakkul C, Chalee W. Long term performance of chloride binding capacity in fly ash concrete in a marine environment. Constr Build Mater. 2010;24(8):1352–1357.
- Li C, Sun H, Li L. A review: the comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements. Cem Concr Res. 2010;40(9):1341–1349.
- Richardson IG, Li S. Composition and structure of an 18-year-old 5M KOH-activated ground granulated blast-furnace slag paste. Constr Build Mater. 2018;168:404–411.
- Jun Y, Bae YH, Shin TY, et al. Alkali-activated slag paste with different mixing water: a comparison study of early-age paste using electrical resistivity. Mater. 2020;13(11):2447.
- Chetia M, Goswamee RL, Banerjee S, et al. Arsenic removal from water using calcined Mg–Al layered double hydroxide. Clean Techn Environ Policy. 2012;14(1):21–27.
- Ma B, Fernandez-Martinez A, Grangeon S, et al. Selenite uptake by Ca–Al LDH: a description of intercalated anion coordination geometries. Environ Sci Technol. 2018;52(3):1624–1632.
- Reichle WT. Synthesis of anionic clay minerals (mixed metal hydroxides, hydrotalcite). Solid State Ionics. 1986;22(1):135–141.
- Ben Haha M, Le Saout G, Winnefeld F, et al. Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags. Cem Concr Res. 2011;41(3):301–310.
- Jun Y, Yoon S, Oh JE. A comparison study for chloride-binding capacity between alkali-activated fly ash and slag in the use of seawater. Appl Sci. 2017;7(10):971.
- Ke X, Bernal SA, Provis JL. Uptake of chloride and carbonate by Mg-Al and Ca-Al layered double hydroxides in simulated pore solutions of alkali-activated slag cement. Cem Concr Res. 2017;100:1–13.
- Haha MB, Lothenbach B, Le Saout G, et al. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag—part II: Effect of Al2O3. Cem Concr Res. 2012;42(1):74–83.
- Kuri JC, Khan MNN, Sarker PK. Workability, strength and microstructural properties of ground ferronickel slag blended fly ash geopolymer mortar. J Sustain Cem Mater. 2020;11:75–87.
- Cao R, Li B, You N, et al. Properties of alkali-activated ground granulated blast furnace slag blended with ferronickel slag. Constr Build Mater. 2018;192:123–132.
- Fernández-Jiménez A, Arbi K, Palomo A. Alkali-activated slag cements: Blast furnace versus ferronickel slag. 34th Cem Concr Sci Conf. 2014:203–206.
- ASTM C305-14: Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency. ASTM Int, West Conshohocken, PA. 2014.
- Zhang J, Scherer GW. Comparison of methods for arresting hydration of cement. Cem Concr Res. 2011;41(10):1024–1036.
- PDF-2 Database Sets, International Centre for Diffraction Data. 2007.
- Belsky A, Hellenbrandt M, Karen VL, et al. New developments in the Inorganic Crystal Structure Database (ICSD): accessibility in support of materials research and design. Acta Crystallogr B. 2002;58(Pt 3 Pt 1):364–369.
- ASTM C1152/C1152M-04, Standard test method for Acid-Soluble chloride in mortar and concrete. ASTM Int West Conshohocken, PA, USA. 2012.
- ASTM C1218/C1218M-17, Standard test method for Water-Soluble chloride in mortar and concrete. ASTM Int West Conshohocken, PA, USA. 2017.
- El-Yamany HE, El-Salamawy MA, El-Assal NT. Microstructure and mechanical properties of alkali-activated slag mortar modified with latex. Constr Build Mater. 2018;191:32–38.
- Richardson IG. The importance of proper crystal-chemical and geometrical reasoning demonstrated using layered single and double hydroxides. Acta Crystallogr B Struct Sci Cryst Eng Mater. 2013;69(Pt 2):150–162.
- Dong M, Elchalakani M, Karrech A, et al. Long-term strength of alkali-activated mortars with steel fibres cured in various conditions. JMSE. 2020;8(4):278.
- Cao Y, Guo Q, Liang M, et al. Sb(III) and Sb(V) removal from water by a hydroxyl-intercalated, mechanochemically synthesized Mg-Fe-LDH. Appl Clay Sci. 2020;196:105766.
- Violante A, Pucci M, Cozzolino V, et al. Sorption/desorption of arsenate on/from Mg-Al layered double hydroxides: influence of phosphate. J Colloid Interface Sci. 2009;333(1):63–70.
- Selvam RP, Hall KD, Subramani VJ, et al. Application of nanoscience modeling to understand the atomic structure of C-S-H. In Gopalakrishnan K, Birgisson B, Taylor P(eds). Nanotechnology in civil infrastructure. Springer, Berlin, Heidelberg. 2011. 85–102.
- Taylor HFW. Proposed structure for calcium silicate hydrate gel. J American Ceramic Society. 1986;69(6):464–467.
- El-Didamony H, Amer AA, Abd Ela-ziz H. Properties and durability of alkali-activated slag pastes immersed in sea water. Ceram Int. 2012;38(5):3773–3780.
- Waijarean W, Asavapisit K, Sombatsompop K, et al. The effect of SiO2/Al2O3 ratios on the properties of geopolymers prepared from water treatment residue (WTR) in the presence of heavy metals. GMSARN Int J. 2014;8:97–102.
- Nath SK, Kumar S. Evaluation of the suitability of ground granulated silico-manganese slag in Portland slag cement. Constr Build Mater. 2016;125:127–134.
- Sipiczki M, Srankó D, Kukovecz Á, et al. Synthesis and characterisation of alkaline earth-iron(III) double hydroxides. Chem Pap. 2011;65:840–846.
- Bo Q. Temperature effect on performance of Portland cement versus advanced hybrid cements and alkali-fly ash cement Thesis (Doctoral), Universidad Politécnica de Madrid, Madrid, Spain. 2018.
- Jambunathan N, Sanjayan JG, Pan Z, et al. The role of alumina on performance of alkali-activated slag paste exposed to 50 °C. Cem Concr Res. 2013;54:143–150.
- Myers RJ, Bernal SA, San Nicolas R, et al. Generalized structural description of calcium–sodium aluminosilicate hydrate gels: the cross-linked substituted tobermorite model. Langmuir. 2013;29(17):5294–5306.
- Ye H, Cai R, Tian Z. Natural carbonation-induced phase and molecular evolution of alkali-activated slag: Effect of activator composition and curing temperature. Constr Build Mater. 2020;248:118726.
- Wang S-D, Scrivener KL. Hydration products of alkali activated slag cement. Cem Concr Res. 1995;25(3):561–571.
- Chan C-M, Wu J, Li J-X, et al. Polypropylene/calcium carbonate nanocomposites. Polymer. 2002;43(10):2981–2992.
- Dweck J, Ferreira da Silva PF, Büchler PM, et al. Study by thermogravimetry of the evolution of ettringite phase during type II Portland cement hydration. J Therm Anal Calorim. 2002;69(1):179–186.
- Jun Y, Kim T, Kim JH. Chloride-bearing characteristics of alkali-activated slag mixed with seawater: Effect of different salinity levels. Cem Concr Compos. 2020;112:103680.
- Rama M, Eklund O, Fröjdö S, et al. Characterization of altered mica from sokli, Northern Finland. Clays Clay Miner. 2019;67(5):428–438.
- López T, Bosch P, Asomoza M, et al. DTA-TGA and FTIR spectroscopies of sol-gel hydrotalcites: aluminum source effect on physicochemical properties. Mater Lett. 1997;31(3-6):311–316.
- Kuwahara Y, Tsuji K, Ohmichi T, et al. Transesterifications using a hydrocalumite synthesized from waste slag: an economical and ecological route for biofuel production. Catal. Sci. Technol. 2012;2(9):1842–1851.
- Meng W, Li F, Evans DG, et al. Preparation and intercalation chemistry of magnesium–iron(III) layered double hydroxides containing exchangeable interlayer chloride and nitrate ions. Mater Res Bull. 2004;39(9):1185–1193.
- Murayama N, Maekawa I, Ushiro H, et al. Synthesis of various layered double hydroxides using aluminum dross generated in aluminum recycling process. Int J Miner Process. 2012;110-111:46–52.
- Bushnell-Watson SM, Sharp JH. The application of thermal analysis to the hydration and conversión reactions of calcium alumínate cements. Mater. construcc. 1992;42(228):13–32.
- Papatzani S, Badogiannis EG, Paine K. The pozzolanic properties of inorganic and organomodified nano-montmorillonite dispersions. Constr Build Mater. 2018;167:299–316.
- Kanezaki E. Thermal behavior of the hydrotalcite-like layered structure of mg and Al-layered double hydroxides with interlayer carbonate by means of in situ powder HTXRD and DTA/TG. Solid State Ionics. 1998;106(3-4):279–284.
- Frost RL, Weier ML, Clissold ME, et al. Thermal decomposition of the natural hydrotalcites carrboydite and hydrohonessite. Thermochim Acta. 2003;407(1-2):1–9.
- Földvári M. Handbook of thermogravimetric system of minerals and its use in geological practice. Geological Institute of Hungary, Budapest. 2011.
- Collier NC, Sharp JH, Milestone NB, et al. The influence of water removal techniques on the composition and microstructure of hardened cement pastes. Cem Concr Res. 2008;38(6):737–744.
- Moorehead DR. Cementation by the carbonation of hydrated lime. Cem Concr Res. 1986;16(5):700–708.
- Newkirk AE, Aliferis I. Drying and decomposition of sodium carbonate. Anal. Chem. 1958;30(5):982–984.
- Arya C, Buenfeld NR, Newman JB. Factors influencing chloride-binding in concrete. Cem Concr Res. 1990;20(2):291–300.
- Ye H, Jin X, Chen W, et al. Prediction of chloride binding isotherms for blended cements. Comput Concr. 2016;17(5):655–672.
- Dousti A, Beaudoin JJ, Shekarchi M. Chloride binding in hydrated MK, SF and natural zeolite-lime mixtures. Constr Build Mater. 2017;154:1035–1047.
- Mehta PK, Monteiro PJM. Concrete: microstructure, properties, and materials. New York: McGraw-Hill. 2006.
- Pasupathy K, Berndt M, Castel A, et al. Carbonation of a blended slag-fly ash geopolymer concrete in field conditions after 8years. Constr Build Mater. 2016;125:661–669.
- Molins S, Trebotich D, Yang L, et al. Pore-scale controls on calcite dissolution rates from flow-through laboratory and numerical experiments. Environ Sci Technol. 2014;48(13):7453–7460.