Investigation on the microstructure of a 3D-printed mortar through a novel leaching-subsidiary tomography

References

• Sanjayan J, Jayathilakage R, Rajeev P. Vibration induced active rheology control for 3D concrete printing. Cem Concr Res. 2021;140:106293.
   Web of Science ®Google Scholar
• Hou S, Duan Z, Xiao J, et al. A review of 3D printed concrete: performance requirements, testing measurements and mix design. Constr Build Mater. 2021;273:121745.
   Web of Science ®Google Scholar
• Buswell RA, De Silva WL, Jones SZ, et al. 3D printing using concrete extrusion: a roadmap for research. Cem Concr Res. 2018;112:37–49.
   Web of Science ®Google Scholar
• Yang R, Zeng Q, Peng Y, et al. Anomalous matrix and interlayer pore structure of 3D-printed fiber-reinforced cementitious composites. Cem Concr Res. 2022;157:106829.
   Web of Science ®Google Scholar
• De Schutter G, Lesage K, Mechtcherine V, et al. Vision of 3D printing with concrete—technical, economic and environmental potentials. Cem Concr Res. 2018;112:25–36.
   Web of Science ®Google Scholar
• Ma L, Zhang Q, Jia Z, et al. Effect of drying environment on mechanical properties, internal RH and pore structure of 3D printed concrete. Constr Build Mater. 2022;315:125731.
   Web of Science ®Google Scholar
• Ma L, Zhang Q, Lombois-Burger H, et al. Pore structure, internal relative humidity, and fiber orientation of 3D printed concrete with polypropylene fiber and their relation with shrinkage. J Build Eng. 2022;61:105250.
   Web of Science ®Google Scholar
• Siddika A, Mamun MAA, Ferdous W, et al. 3D-printed concrete: applications, performance, and challenges. J Sustain Cem-Based. 2020;9(3):127–164.
   Web of Science ®Google Scholar
• Chen Y, Zhang Y, Xie Y, et al. Unraveling pore structure alternations in 3D-printed geopolymer concrete and corresponding impacts on macro-properties. Addit Manuf. 2022;59:103137.
   Web of Science ®Google Scholar
• Chen Y, Jia L, Liu C, et al. Mechanical anisotropy evolution of 3D-printed alkali-activated materials with different GGBFS/FA combinations. J Build Eng. 2022;50:104126.
   Web of Science ®Google Scholar
• Xiao J, Zou S, Yu Y, et al. 3D recycled mortar printing: system development, process design, material properties and on-site printing. J Build Eng. 2020;32:101779.
   Web of Science ®Google Scholar
• Xiao J, Lv Z, Duan Z, et al. Study on preparation and mechanical properties of 3D printed concrete with different aggregate combinations. J Build Eng. 2022;51:104282.
   Web of Science ®Google Scholar
• Xiao J, Hou S, Duan Z, et al. Rheology of 3D printable concrete prepared by secondary mixing of ready-mix concrete. Cem Concr Comp. 2023;138:104958.
   Web of Science ®Google Scholar
• Arunothayan AR, Nematollahi B, Ranade R, et al. Fiber orientation effects on ultra-high performance concrete formed by 3D printing. Cem Concr Res. 2021;143: 143106384.
   Web of Science ®Google Scholar
• Zhang C, Jia Z, Luo Z, et al. Printability and pore structure of 3D printing low carbon concrete using recycled clay brick powder with various particle features. J Sustain Cem-Based. 2022;1–10.
   Web of Science ®Google Scholar
• Papachristoforou M, Mitsopoulos V, Stefanidou M. Evaluation of workability parameters in 3D printing concrete. Procedia Struct Integr. 2018;10:155–162.
   Google Scholar
• Yoris-Nobile AI, Lizasoain-Arteaga E, Slebi-Acevedo CJ, et al. Life cycle assessment (LCA) and multi-criteria decision-making (MCDM) analysis to determine the performance of 3D printed cement mortars and geopolymers. J Sustain Cem-Based. 2022;1–18.
   Web of Science ®Google Scholar
• Kim KY, Yun TS, Park KP. Evaluation of pore structures and cracking in cement paste exposed to elevated temperatures by X-ray computed tomography. Cem Concr Res. 2013;50:34–40.
   Web of Science ®Google Scholar
• Moini R, Baghaie A, Rodriguez FB, et al. Quantitative microstructural investigation of 3D-printed and cast cement pastes using micro-computed tomography and image analysis. Cem Concr Res. 2021;147:106493.
   Web of Science ®Google Scholar
• Geng Z, She W, Zuo W, et al. Layer-interface properties in 3D printed concrete: dual hierarchical structure and micromechanical characterization. Cem Concr Res. 2020;138:106220.
   Web of Science ®Google Scholar
• Ghourchian S, Butler M, Krüger M, et al. Modelling the development of capillary pressure in freshly 3D-printed concrete elements. Cem Concr Res. 2021;145:106457.
   Web of Science ®Google Scholar
• Cui D, Sun W, Wang Q, et al. Use of tomography to estimate the representative elementary volume in mortars stained with potassium iodide. Mater Design. 2018;147:80–91.
   Web of Science ®Google Scholar
• Morandeau A, Thiery M, Dangla P. Investigation of the carbonation mechanism of CH and CSH in terms of kinetics, microstructure changes and moisture properties. Cem Concr Res. 2014;56:153–170.
   Web of Science ®Google Scholar
• Dawood ET, Ramli M. Development of high strength flowable mortar with hybrid fiber. Constr Build Mater. 2010;24(6):1043–1050.
   Web of Science ®Google Scholar
• Rahul A, Santhanam M, Meena H, et al. 3D printable concrete: mixture design and test methods. Cem Concr Comp. 2019;97:13–23.
   Web of Science ®Google Scholar
• Latham S, Varslot T, Sheppard A. Image registration: enhancing and calibrating X-ray micro-CT imaging. Proceedings of the Society of Core Analysts, Abu Dhabi, UAE; 2008. p. 1–12.
   Google Scholar
• Tang Y-J, Zuo X-B, He S-L, et al. Influence of slag content and water-binder ratio on leaching behavior of cement pastes. Constr Build Mater. 2016;129:61–69.
   Web of Science ®Google Scholar
• Bai G, Wang L, Ma G, et al. 3D printing eco-friendly concrete containing under-utilised and waste solids as aggregates. Cem Concr Comp. 2021;120:104037.
   Web of Science ®Google Scholar
• Zeng Q, Chen S, Yang P, et al. Reassessment of mercury intrusion porosimetry for characterizing the pore structure of cement-based porous materials by monitoring the mercury entrapments with X-ray computed tomography. Cem Concr Comp. 2020;113:103726.
   Web of Science ®Google Scholar
• Xie X, Zhang L, Shi C, et al. Prediction of lubrication layer properties of pumped concrete based on flow induced particle migration. Constr Build Mater. 2022;322:126115.
   Web of Science ®Google Scholar
• Cui D, Wang Q, Wan Y. A discussion of the paper “Effect of carbonation on cement paste microstructure characterized by micro-computed tomography”. Constr Build Mater. 2021;303:124530.
   Web of Science ®Google Scholar
• Brisard S, Serdar M, Monteiro PJ. Multiscale X-ray tomography of cementitious materials: a review. Cem Concr Res. 2020;128:105824.
   Web of Science ®Google Scholar
• Nerella VN, Hempel S, Mechtcherine V. Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing. Constr Build Mater. 2019;205:586–601.
   Web of Science ®Google Scholar
• Chen Y, Rodriguez CR, Li Z, et al. Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing. Cem Concr Comp. 2020;114:103708.
   Web of Science ®Google Scholar
• Wangler T, Roussel N, Bos FP, et al. Digital concrete: a review. Cem Concr Res. 2019;123:105780.
   Web of Science ®Google Scholar
• Lopes L, Silva A, Carneiro O. Multi-material 3D printing: the relevance of materials affinity on the boundary interface performance. Addit Manuf. 2018;23:45–52.
   Web of Science ®Google Scholar
• Mohan MK, Rahul A, De Schutter G, et al. Extrusion-based concrete 3D printing from a material perspective: a state-of-the-art review. Cem Concr Comp. 2021;115:103855.
   Web of Science ®Google Scholar
• Zhang C, Nerella VN, Krishna A, et al. Mix design concepts for 3D printable concrete: a review. Cem Concr Comp. 2021;122:104155.
   Web of Science ®Google Scholar
• Malaeb Z, AlSakka F, Hamzeh F. 3D concrete printing: machine design, mix proportioning, and mix comparison between different machine setups, in 3D concrete printing technology. Butterworth-Heinemann; 2019. p. 115–136.
   Google Scholar
• Zhang Y, Zhang Y, Liu G, et al. Fresh properties of a novel 3D printing concrete ink. Constr Build Mater. 2018;174:263–271.
   Web of Science ®Google Scholar
• Shakor P, Sanjayan J, Nazari A, et al. Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing. Constr Build Mater. 2017;138:398–409.
   Web of Science ®Google Scholar
• Cui D, Sun W, Wan K, et al. Porosity characterization in interfacial transition zone using dual CT scans. J Test Eval. 2017;45(2):408–418.
   Web of Science ®Google Scholar