Novel thermomechanical processing methods for achieving ultragrain refinement of low-carbon steel without heavy plastic deformation

References

• Ueji R, Tsuji N, Minamino Y, Koizumi Y. Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite. Acta Mater. 2002;50:4177–4189. doi: 10.1016/S1359-6454(02)00260-4
   Web of Science ®Google Scholar
• Tsuji N, Matsubara Y, Saito Y. Dynamic recrystallization of ferrite in interstitial free steel. Scripta Mater. 1997;37:477–484. doi: 10.1016/S1359-6462(97)00123-1
   Web of Science ®Google Scholar
• Baczynski J, Jonas JJ. Torsion textures produced by dynamic recrystallization in α-iron and two interstitial-free steels. Metall Mater Trans A. 1998;29:447–462. doi: 10.1007/s11661-998-0125-y
   Web of Science ®Google Scholar
• Song R, Ponge D, Raabe D, Kaspar R. Microstructure and crystallographic texture of an ultrafine grained C–Mn steel and their evolution during warm deformation and annealing. Acta Mater. 2005;53:845–858. doi: 10.1016/j.actamat.2004.10.051
   Web of Science ®Google Scholar
• Hodgson PD, Hickson MR, Gibbs RK. Ultrafine ferrite in low carbon steel. Scripta Mater. 1999;40:1179–1184. doi: 10.1016/S1359-6462(98)00411-4
   Web of Science ®Google Scholar
• Mazaheri Y, Kermanpur A, Najafizadeh A, Saeidi N. Effects of initial microstructure and thermomechanical processing parameters on microstructures and mechanical properties of ultrafine grained dual phase steels. Mater Sci Eng A. 2014;612:54–62. doi: 10.1016/j.msea.2014.06.031
   Web of Science ®Google Scholar
• Dhua SK, Sarkar PP. Development of ultrafine grains in C–Mn steel plates through hot-rolling and air-cooling. Mater Sci Eng A. 2013;575:177–188. doi: 10.1016/j.msea.2013.03.052
   Web of Science ®Google Scholar
• Sabooni S, Karimzadeh F, Enayati MH, Ngan AHW. Friction-stir welding of ultrafine grained austenitic 304L stainless steel produced by martensitic thermomechanical processing. Mater Design. 2015;76:130–140. doi: 10.1016/j.matdes.2015.03.052
   Web of Science ®Google Scholar
• Matsumura Y, Yada H. Evolution of ultrafine-grained ferrite in hot deformation. Trans ISIJ. 1987;27:492–498. doi: 10.2355/isijinternational1966.27.492
   Google Scholar
• Hurley PJ, Hodgson PD, Muddle BC. Analysis and characterisation of ultra-fine ferrite produced during a new steel strip rolling process. Scripta Mater. 1999;40:433–438. doi: 10.1016/S1359-6462(98)00442-4
   Web of Science ®Google Scholar
• Hurley PJ, Hodgson PD. Formation of ultra-fine ferrite in hot rolled strip: potential mechanisms for grain refinement. Mater Sci Eng A. 2001;302:206–214. doi: 10.1016/S0921-5093(00)01823-2
   Web of Science ®Google Scholar
• Hu J, Du LX, Xie H, Yu P, Misra RDK. A nanograined/ ultrafine-grained low-carbon microalloyed steel proce- ssed by warm rolling. Mater Sci Eng A. 2014;605:186–191. doi: 10.1016/j.msea.2014.03.064
   Web of Science ®Google Scholar
• Beladi H, Kelly GL, Shokouhi A, Hodgson PD. Effect of thermomechanical parameters on the critical strain for ultrafine ferrite formation through hot torsion testing. Mater Sci Eng A. 2004;367:152–161. doi: 10.1016/j.msea.2003.09.095
   Web of Science ®Google Scholar
• Pandi R, Yue S. Dynamic transformation of austenite to ferrite in low carbon steel. ISIJ Int. 1994;34:270–279. doi: 10.2355/isijinternational.34.270
   Web of Science ®Google Scholar
• Eghbali B. Study on the ferrite grain refinement during intercritical deformation of a microalloyed steel. Mater Sci Eng A. 2010;527:3407–3410. doi: 10.1016/j.msea.2010.01.075
   Web of Science ®Google Scholar
• Park N, Shibata A, Terada D, Tsuji N. Flow stress analysis for determining the critical condition of dynamic ferrite transformation in 6Ni–0.1C steel. Acta Mater. 2013;61:163–173. doi: 10.1016/j.actamat.2012.09.043
   Web of Science ®Google Scholar
• Zhao L, Park N, Shibata A, Tsuji N. Microstructural evolution of ferrite grains during dynamic transformation in 10Ni-0.1C Steel. TMS 2014 Annual Supplemental Proceedings. 919–926, San Diego.
   Google Scholar
• Humphreys FJ, Hatherly M. Recrystallization and related annealing phenomena. Amsterdam: Elsevier; 2004.
   Google Scholar
• Galindo-Nava EI, Rivera-Díaz-del-Castillo PEJ. Grain size evolution during discontinuous dynamic recrystallization. Scripta Mater. 2014;72–73:1–4. doi: 10.1016/j.scriptamat.2013.09.020
   Web of Science ®Google Scholar
• Dehghan-manshadi A, Hodgson PD. Dependency of recrystallization mechanism to the initial grain size. Metall Mater Trans A. 2008;39A:2830–2840. doi: 10.1007/s11661-008-9656-5
   Web of Science ®Google Scholar
• Belyakov A, Tsuzaki K, Miura H, Sakai T. Effect of initial microstructures on grain refinement in a stainless steel by large strain deformation. Acta Mater. 2003;51:847–861. doi: 10.1016/S1359-6454(02)00476-7
   Web of Science ®Google Scholar
• Gourdet S, Montheillet F. A model of continuous dynamic recrystallization. Acta Mater. 2003;51:2685–2699. doi: 10.1016/S1359-6454(03)00078-8
   Web of Science ®Google Scholar
• Sellars CM. From trial and error to computer modelling of thermomechanical processing. Ironmak Steelmak. 2011;38:250–257. doi: 10.1179/030192310X12706305605817
   Web of Science ®Google Scholar
• Murtya SVSN, Torizuka S, Nagai K, Kitai T, Kogo Y. Dynamic recrystallization of ferrite during warm deformation of ultrafine grained ultra-low carbon steel. Scripta Mater. 2005;53:763–768. doi: 10.1016/j.scriptamat.2005.05.027
   Web of Science ®Google Scholar
• Miller RL. Ultrafine-grained microstructures and mechanical properties of alloy steels. Metall Trans. 1972;3:905–911. doi: 10.1007/BF02647665
   Web of Science ®Google Scholar
• Furuhara T, Yamaguchi T, Furimoto S, Maki T. Formation of Ferrite+Cementite microduplex structure by warm deformation in high carbon steels. Mater Sci Forum. 2007;539–543:155–160. doi: 10.4028/www.scientific.net/MSF.539-543.155
   Google Scholar
• Gao S, Chen MC, Chen S, Kamikawa N, Shibata A, Tsuji N. Yielding behavior and its effect on uniform elongation of fine grained IF steel. Mater Trans. 2014;55:73–77. doi: 10.2320/matertrans.MA201317
   Web of Science ®Google Scholar
• Tsuji N, Ito Y, Saito Y, Minamino Y. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing. Scripta Mater. 2002;47:893–899. doi: 10.1016/S1359-6462(02)00282-8
   Web of Science ®Google Scholar
• Song R, Ponge D, Raabe D. Mechanical properties of an ultrafine grained C–Mn steel processed by warm deformation and annealing. Acta Mater. 2005;53:4881–4892. doi: 10.1016/j.actamat.2005.07.009
   Web of Science ®Google Scholar
• Song R, Ponge D, Raabe D. Improvement of the work hardening rate of ultrafine grained steels through second phase particles. Scripta Mater. 2005;52:1075–1080. doi: 10.1016/j.scriptamat.2005.02.016
   Web of Science ®Google Scholar
• Huang X, Hansen N, Tsuji N. Hardening by annealing and softening by deformation in nanostructured metals. Science. 2006;312:249–251. doi: 10.1126/science.1124268
   PubMed Web of Science ®Google Scholar