Alloy design against the solidification cracking in fusion additive manufacturing: an application to a FeCrAl alloy

References

• Wang H, Chen L, Dovgyy B, et al. Micro-cracking, microstructure and mechanical properties of Hastelloy-X alloy printed by laser powder bed fusion: as-built, annealed and hot-isostatic pressed. Addit Manuf. 2021;39:101853.
   Web of Science ®Google Scholar
• Williams RJ, Al-Lami J, Hooper PA, et al. Creep deformation and failure properties of 316 L stainless steel manufactured by laser powder bed fusion under multiaxial loading conditions. Addit Manuf. 2021;37:101706.
   Web of Science ®Google Scholar
• Oliveira JP, LaLonde AD, Ma J. Processing parameters in laser powder bed fusion metal additive manufacturing. Mater Des. 2020;193:108762.
   Web of Science ®Google Scholar
• Kurz W, Bezençon C, Gäumann M. Columnar to equiaxed transition in solidification processing. Sci Technol Adv Mater. 2001;2:185–191.
   Web of Science ®Google Scholar
• Rappaz M, David SA, Vitek JM, et al. Analysis of solidification microstructures in Fe-Ni-Cr single-crystal welds. Metall Trans A. 1990;21:1767–1782.
   Web of Science ®Google Scholar
• Pham M-S, Dovgyy B, Hooper PA, et al. The role of side-branching in microstructure development in laser powder-bed fusion. Nat Commun. 2020;11:749.
   PubMed Web of Science ®Google Scholar
• Foster SJ, Carver K, Dinwiddie RB, et al. Process-defect-structure-property correlations during laser powder bed fusion of alloy 718: role of in situ and ex situ characterizations. Metall Mater Trans A Phys Metall Mater Sci. 2018;49:5775–5798.
   Google Scholar
• Ni X, Kong D, Zhang L, et al. Effect of process parameters on the mechanical properties of Hastelloy X alloy fabricated by selective laser melting. J Mater Eng Perform. 2019;28:5533–5540.
   Google Scholar
• Qian B, Saeidi K, Kvetková L, et al. Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting. Dent Mater. 2015;31:1435–1444.
   PubMed Web of Science ®Google Scholar
• Letenneur M, Kreitcberg A, Brailovski V. Optimization of laser powder Bed fusion processing using a combination of melt pool modeling and design of experiment approaches: density control. J Manuf Mater Process. 2019;3:21.
   Google Scholar
• Akita M, Uematsu Y, Kakiuchi T, et al. Defect-dominated fatigue behavior in type 630 stainless steel fabricated by selective laser melting. Mater Sci Eng A. 2016;666:19–26.
   Web of Science ®Google Scholar
• Polonsky AT, Lenthe WC, Echlin MP, et al. Solidification-driven orientation gradients in additively manufactured stainless steel. Acta Mater. 2020;183:249–260.
   Web of Science ®Google Scholar
• Coniglio N, Cross CE. Initiation and growth mechanisms for weld solidification cracking. Int Mater Rev. 2013;58:375–397.
   Web of Science ®Google Scholar
• Kou S. A simple index for predicting the susceptibility to solidification cracking. Weld J. 2015;94:374s–388s.
   Web of Science ®Google Scholar
• Feurer U. Influence of alloy composition and solidification conditions on dendrite arm spacing, feeding and hot tearing properties of aluminium alloys. Proc Int Symp Delft; 1977. p. 131–145.
   Google Scholar
• Kou S. A criterion for cracking during solidification. Acta Mater. 2015;88:366–374.
   Web of Science ®Google Scholar
• Rappaz M, Drezet J-M, Gremaud M. A new hot-tearing criterion. Metall Mater Trans A. 1999;30:449–455.
   Web of Science ®Google Scholar
• Clyne TW, Wolf M, Kurz W. The effect of melt composition on solidification cracking of steel, with particular reference to continuous casting. Metall Trans B. 1982;13:259–266.
   Web of Science ®Google Scholar
• Hooper PA. Melt pool temperature and cooling rates in laser powder bed fusion. Addit Manuf. 2018;22:548–559.
   Web of Science ®Google Scholar
• De A, Walsh CA, Maiti SK, et al. Prediction of cooling rate and microstructure in laser spot welds. Sci Technol Weld Join. 2003;8:391–399.
   Web of Science ®Google Scholar
• Das D, Pratihar DK, Roy GG. Cooling rate predictions and its correlation with grain characteristics during electron beam welding of stainless steel. Int J Adv Manuf Technol. 2018;97:2241–2254.
   Web of Science ®Google Scholar
• Chen Y, Zhang K, Huang J, et al. Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718. Mater Des. 2016;90:586–594.
   Web of Science ®Google Scholar
• Katayama S. Defect formation mechanisms and preventive procedures in laser welding. In: Katayama S., editor. Handb laser weld technol. Cambridge: Elsevier; 2013. p. 332–373.
   Google Scholar
• Raabe D, Tasan CC, Olivetti EA. Strategies for improving the sustainability of structural metals. Nature. 2019;575:64–74.
   PubMed Web of Science ®Google Scholar
• Field KG, Snead MA, Yamamoto Y, et al. Handbook on the material properties of FeCrAl alloys for nuclear power production applications; 2017.
   Google Scholar
• Sun Z, Yamamoto Y, Chen X. Impact toughness of commercial and model FeCrAl alloys. Mater Sci Eng A. 2018;734:93–101.
   Web of Science ®Google Scholar
• Yamamoto Y, Pint BA, Terrani KA, et al. Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors. J Nucl Mater. 2015;467:703–716.
   Web of Science ®Google Scholar
• Rebak RB. Versatile oxide films protect FeCrAl alloys under normal operation and accident conditions in light water power reactors. JOM. 2018;70:176–185.
   Web of Science ®Google Scholar
• He Y, Zhong M, Beuth J, et al. A study of microstructure and cracking behavior of H13 tool steel produced by laser powder bed fusion using single-tracks, multi-track pads, and 3D cubes. J Mater Process Technol. 2020;286:116802.
   Web of Science ®Google Scholar
• Dovgyy B, Piglione A, Hooper PA, et al. Comprehensive assessment of the printability of CoNiCrFeMn in laser powder bed fusion. Mater Des. 2020;194:108845.
   Web of Science ®Google Scholar
• Piglione A, Dovgyy B, Liu C, et al. Printability and microstructure of the CoCrFeMnNi high-entropy alloy fabricated by laser powder bed fusion. Mater Lett. 2018;224:22–25.
   Web of Science ®Google Scholar
• Wang YM, Voisin T, McKeown JT, et al. Additively manufactured hierarchical stainless steels with high strength and ductility. Nat Mater. 2017;17:63–70.
   PubMed Web of Science ®Google Scholar
• Wang X, Carter LN, Pang B, et al. Microstructure and yield strength of SLM-fabricated CM247LC Ni-superalloy. Acta Mater. 2017;128:87–95.
   Web of Science ®Google Scholar