Probing the effect of intragranular premature κ-carbide on incipient plasticity behavior in austenite-based Fe-Mn-Al-(Cr)-C steels

Reference

• Chen SP, Rana R, Haldar A, et al. Current state of Fe-Mn-Al-C low density steels. Prog Mater Sci. 2017;89:345–391.
   Web of Science ®Google Scholar
• Haase C, Zehnder C, Ingendahl T, et al. On the deformation behavior of κ-carbide-free and κ-carbide-containing high-Mn light-weight steel. Acta Mater. 2017;122:332–343.
   Web of Science ®Google Scholar
• Yao MJ, Welsch E, Ponge D, et al. Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel. Acta Mater. 2017;140:258–273.
   Web of Science ®Google Scholar
• Ardell AJ. Precipitation hardening. Metall Trans A. 1985;16(12):2131–2165.
   Web of Science ®Google Scholar
• Welsch E, Ponge D, Hafez Haghighat SM, et al. Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel. Acta Mater. 2016;116:188–199.
   Web of Science ®Google Scholar
• Schuh CA, Mason JK, Lund AC. Quantitative insight into dislocation nucleation from high-temperature nanoindentation experiments. Nat Mater. 2005;4(8):617–621.
   PubMed Web of Science ®Google Scholar
• Ye YX, Lu ZP, Nieh TG. Dislocation nucleation during nanoindentation in a body-centered cubic TiZrHfNb high-entropy alloy. Scr Mater. 2017;130:64–68.
   Web of Science ®Google Scholar
• Wang SP, Xu J. Incipient plasticity and activation volume of dislocation nucleation for TiZrNbTaMo high-entropy alloys characterized by nanoindentation. J Mater Sci Technol. 2019;35(5):812–816.
   Web of Science ®Google Scholar
• Ye YX, Ouyang B, Liu CZ, et al. Effect of interstitial oxygen and nitrogen on incipient plasticity of NbTiZrHf high-entropy alloys. Acta Mater. 2020;199:413–424.
   Web of Science ®Google Scholar
• Gan KF, Yan DS, Zhu SY, et al. Interstitial effects on the incipient plasticity and dislocation behavior of a metastable high-entropy alloy: nanoindentation experiments and statistical modeling. Acta Mater. 2021;206:116633.
   Web of Science ®Google Scholar
• Zhao YK, Park JM, Jang J-i, et al. Bimodality of incipient plastic strength in face-centered cubic high-entropy alloys. Acta Mater. 2021;202:124–134.
   Web of Science ®Google Scholar
• Zambrano OA, Valdés J, Aguilar Y, et al. Hot deformation of a Fe-Mn-Al-C steel susceptible of κ-carbide precipitation. Mater Sci Eng A. 2017;689:269–285.
   Web of Science ®Google Scholar
• Zhang RP, Zhao ST, Ding J, et al. Short-range order and its impact on the CrCoNi medium-entropy alloy. Nature. 2020;581:283–287.
   PubMed Web of Science ®Google Scholar
• He BB, Liang ZY, Huang MX. Nanoindentation investigation on the initiation of yield point phenomenon in a medium Mn steel. Scr Mater. 2018;150:134–138.
   Web of Science ®Google Scholar
• Zhang JL, Jiang YS, Zheng WS, et al. Revisiting the formation mechanism of intragranular κ-carbide in austenite of a Fe-Mn-Al-Cr-C low-density steel. Scr Mater. 2021;199:113836.
   Web of Science ®Google Scholar
• Wang ZW, Lu WJ, Zhao H, et al. Formation mechanism of κ-carbides and deformation behavior in Si-alloyed FeMnAlC lightweight steels. Acta Mater. 2020;198:258–270.
   Web of Science ®Google Scholar
• Zhang JL, Hu CH, Zhang YH, et al. Microstructures, mechanical properties and deformation of near-rapidly solidified low-density Fe-20Mn-9Al-1.2C-xCr steels. Mater Des. 2020;186:108307.
   Web of Science ®Google Scholar
• Jeong S, Lee Y, Park G, et al. Phase transformation and the mechanical characteristics of heat-affected zones in austenitic Fe-Mn-Al-Cr-C lightweight steel during post-weld heat treatment. Mater Charact. 2021;177:111150.
   Web of Science ®Google Scholar
• Kim KW, Park SJ, Moon J, et al. Characterization of microstructural evolution in austenitic Fe-Mn-Al-C lightweight steels with Cr content. Mater Charact. 2020;170:110717.
   Web of Science ®Google Scholar
• Yang Y, Zhang JL, Hu CH, et al. Structures and properties of Fe-(8-16)Mn-9Al-0.8C low density steel made by a centrifugal casting in near-rapid solidification. Mater Sci Eng A. 2019;748:74–84.
   Web of Science ®Google Scholar
• He W, Wang BL, Yang Y, et al. Microstructure and mechanical behavior of a low-density Fe-12Mn-9Al-1.2C steel prepared using centrifugal casting under near-rapid solidification. J Iron Steel Res Int. 2018;25:830–838.
   Web of Science ®Google Scholar
• Seol JB, Haley D, Hoelzer DT, et al. Influences of interstitial and extrusion temperature on grain boundary segregation, Y-Ti-O nanofeatures, and mechanical properties of ferritic steels. Acta Mater. 2018;153:71–85.
   Web of Science ®Google Scholar
• Li ZM, Körmann K, Grabowski B, et al. Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity. Acta Mater. 2017;136:262–270.
   Web of Science ®Google Scholar
• Yao MJ, Pradeep KG, Tasan CC, et al. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility. Scr Mater. 2014;72-73:5–8.
   Web of Science ®Google Scholar
• Johnson KL. Contact mechanics. Cambridge, London: Cambridge university press; 1985.
   Google Scholar
• Mac Millan NH. The theoretical strength of solids. J Mater Sci. 1972;7(2):239–254.
   Web of Science ®Google Scholar
• Oliver WC, Pharr GM. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res. 2004;19(1):3–20.
   Web of Science ®Google Scholar
• Schuh CA, Lund AC. Application of nucleation theory to the rate dependence of incipient plasticity during nanoindentation. J Mater Res. 2004;19(7):2152–2158.
   Web of Science ®Google Scholar
• Lee J, Park S, Kim H, et al. Simulation of κ-carbide precipitation kinetics in aged low-density Fe-Mn-Al-C steels and its effects on strengthening. Met Mater Int. 2018;24:702–710.
   Web of Science ®Google Scholar
• Sarkar A, Sanyal S, Bandyopadhyay TK, et al. Implications of microstructure, Taylor factor distribution and texture on tensile properties in a Ti-added Fe-Mn-Al-Si-C steel. Mater Sci Eng A. 2019;767:138402.
   Web of Science ®Google Scholar
• Zhu C, Lu ZP, Nieh TG. Incipient plasticity and dislocation nucleation of FeCoCrNiMn high-entropy alloy. Acta Mater. 2013;61(8):2993–3001.
   Web of Science ®Google Scholar
• Lee J, Kim H, Park SJ, et al. Correlation between macroscale tensile properties and small-scale intrinsic mechanical behavior of Mo-added Fe-Mn-Al-C lightweight steels. Mater Sci Eng A. 2019;768:138460.
   Web of Science ®Google Scholar
• Sekido K, Ohmura T, Zhang L, et al. The effect of interstitial carbon on the initiation of plastic deformation of steels. Mater Sci Eng A. 2011;530:396–401.
   Web of Science ®Google Scholar