References
- Schuh CA, Hufnagel T, Ramamurty U. Mechanical behavior of amorphous alloys. Acta Mater. 2007;55:4067–4109. DOI:https://doi.org/10.1016/j.actamat.2007.01.052.
- Sun BA, Wang WH. The fracture of bulk metallic glasses. Prog Mater Sci. 2015;74:211–307. DOI:https://doi.org/10.1016/j.pmatsci.2015.05.002.
- Wang WH, Dong C, Shek CH. Bulk metallic glasses. Mater Sci Eng R. 2004;44:45–89. DOI:https://doi.org/10.1016/j.mser.2004.03.001.
- Schroers J. Processing of bulk metallic glass. Adv Mater. 2010;22:1566–1597. DOI:https://doi.org/10.1002/adma.200902776.
- Pauly S, Löber L, Petters R, et al. Processing metallic glasses by selective laser melting. Mater Today. 2013;16:37–41. DOI:https://doi.org/10.1016/j.mattod.2013.01.018.
- Gao X, Lin X, Yu J, et al. Selective laser melting (SLM) of in-situ beta phase reinforced Ti/Zr-based bulk metallic glass matrix composite. Scripta Mater. 2019;171:21–25. DOI:https://doi.org/10.1016/j.scriptamat.2019.06.007.
- Lin X, Zhang Y, Yang G, et al. Microstructure and compressive/tensile characteristic of large size Zr-based bulk metallic glass prepared by laser solid forming. J Mater Sci Technol. 2019;35:328–335. DOI:https://doi.org/10.1016/j.jmst.2018.10.033.
- Ouyang D, Zhang P, Zhang C, et al. Understanding of crystallization behaviors in laser 3D printing of bulk metallic glasses. Appl Mater Today. 2021;23:100988. DOI:https://doi.org/10.1016/j.apmt.2021.100988.
- Li XP, Roberts MP, O’Keeffe S, et al. Selective laser melting of Zr-based bulk metallic glasses: processing, microstructure and mechanical properties. Mater Des. 2016;112:217–226. DOI:https://doi.org/10.1016/j.matdes.2016.09.071.
- Ouyang D, Li N, Xing W, et al. 3D printing of crack-free high strength Zr-based bulk metallic glass composite by selective laser melting. Intermetallics. 2017;90:128–134. DOI:https://doi.org/10.1016/j.intermet.2017.07.010.
- Bordeenithikasem P, Stolpe M, Elsen A, et al. Glass forming ability, flexural strength, and wear properties of additively manufactured Zr-based bulk metallic glasses produced through laser powder bed fusion. Addit Manuf. 2018;21:312–317. DOI:https://doi.org/10.1016/j.addma.2018.03.023.
- Best JP, Evenson Z, Yang F, et al. Structural periodicity in laser additive manufactured Zr-based bulk metallic glass. Appl Phys Lett. 2019;115:031902. DOI:https://doi.org/10.1063/1.5100050.
- Best JP, Ast J, Li B, et al. Relating fracture toughness to micro-pillar compression response for a laser powder bed additive manufactured bulk metallic glass. Mater Sci Eng A. 2020;770:138535. DOI:https://doi.org/10.1016/j.msea.2019.138535.
- Best JP, Ostergaard HE, Li B, et al. Fracture and fatigue behaviour of a laser additive manufactured Zr-based bulk metallic glass. Addit Manuf. 2020;36:101416. DOI:https://doi.org/10.1016/j.addma.2020.101416.
- Sarac B, Schroers J. Designing tensile ductility in metallic glasses. Nat Commun. 2013;4:2158. DOI:https://doi.org/10.1038/ncomms3158.
- Lu Y, Huang Y, Wu J. Laser additive manufacturing of structural-graded bulk metallic glass. J Alloys Compd. 2018;766:506–510. DOI:https://doi.org/10.1016/j.jallcom.2018.06.259.
- Simchi A, Pohl H. Effects of laser sintering processing parameters on the microstructure and densification of iron powder. Mater Sci Eng A. 2003;359:119–128. DOI:https://doi.org/10.1016/s0921-5093(03)00341-1.
- Yang G, Lin X, Liu F, et al. Laser solid forming Zr-based bulk metallic glass. Intermetallics. 2012;22:110–115. DOI:https://doi.org/10.1016/j.intermet.2011.10.008.
- ASTM Standard E399. ASTM International, 2009. DOI:https://doi.org/10.1520/e0399-12e03.
- Zhang C, Ouyang D, Pauly S, et al. 3D printing of bulk metallic glasses. Mater Sci Eng R. 2021;145:100625. DOI:https://doi.org/10.1016/j.mser.2021.100625.
- Sun BA, Pauly S, Tan J, et al. Serrated flow and stick–slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass. Acta Mater. 2012;60:4160–4171. DOI:https://doi.org/10.1016/j.actamat.2012.04.013.
- Xu J, Ramamurty U, Ma E. The fracture toughness of bulk metallic glasses. JOM. 2010;62:10–18. DOI:https://doi.org/10.1007/s11837-010-0052-4.
- Ketkaew J, Liu Z, Chen W, et al. Critical crystallization for embrittlement in metallic glasses. Phys Rev Lett. 2015;115:265502. DOI:https://doi.org/10.1103/PhysRevLett.115.265502.
- Chen W, Liu Z, Ketkaew J, et al. Flaw tolerance of metallic glasses. Acta Mater. 2016;107:220–228. DOI:https://doi.org/10.1016/j.actamat.2016.02.002.
- Kumar G, Rector D, Conner RD, et al. Embrittlement of Zr-based bulk metallic glasses. Acta Mater. 2009;57:3572–3583. DOI:https://doi.org/10.1016/j.actamat.2009.04.016.
- Murali P, Ramamurty U. Embrittlement of a bulk metallic glass due to sub-annealing. Acta Mater. 2005;53:1467–1478. DOI:https://doi.org/10.1016/j.actamat.2004.11.040.
- Launey ME, Busch R, Kruzic JJ. Effects of free volume changes and residual stresses on the fatigue and fracture behavior of a Zr–Ti–Ni–Cu–Be bulk metallic glass. Acta Mater. 2008;56:500–510. DOI:https://doi.org/10.1016/j.actamat.2007.10.007.
- Sun Y, Concustell A, Greer AL. Thermomechanical processing of metallic glasses: extending the range of the glassy state. Nat Rev Mater. 2016;1:16039. DOI:https://doi.org/10.1038/natrevmats.2016.39.
- Pauly S, Schricker C, Scudino S, et al. Processing a glass-forming Zr-based alloy by selective laser melting. Mater Des. 2017;135:133–141. DOI:https://doi.org/10.1016/j.matdes.2017.08.070.
- Gibson MA, Mykulowycz NM, Shim J, et al. 3D printing metals like thermoplastics: fused filament fabrication of metallic glasses. Mater Today. 2018;21:697–702. DOI:https://doi.org/10.1016/j.mattod.2018.07.001.
- Zhang C, Wang W, Li Y-C, et al. 3D printing of Fe-based bulk metallic glasses and composites with large dimensions and enhanced toughness by thermal spraying. J Mater Chem A. 2018;6:6800–6805. DOI:https://doi.org/10.1039/c8ta00405f.
- Deng L, Wang S, Wang P, et al. Selective laser melting of a Ti-based bulk metallic glass. Mater Lett. 2018;212:346–349. DOI:https://doi.org/10.1016/j.matlet.2017.10.130.
- Li N, Zhang J, Xing W, et al. 3D printing of Fe-based bulk metallic glass composites with combined high strength and fracture toughness. Mater Des. 2018;143:285–296. DOI:https://doi.org/10.1016/j.matdes.2018.01.061.
- Zhang P, Ouyang D, Liu L. Enhanced mechanical properties of 3D printed Zr-based BMG composite reinforced with Ta precipitates. J Alloys Compd. 2019;803:476–483. DOI:https://doi.org/10.1016/j.jallcom.2019.06.303.
- Zhang C, Li X-M, Liu S-Q. 3D printing of Zr-based bulk metallic glasses and components for potential biomedical applications. J Alloys Compd. 2019;790:963–973. DOI:https://doi.org/10.1016/j.jallcom.2019.03.275.
- Lu X, Nursulton M, Du Y, et al. Structural and mechanical characteristics of Cu50Zr43Al7 bulk metallic glass fabricated by Selective laser melting. Materials. 2019;12:775. DOI:https://doi.org/10.3390/ma12050775.
- Su S, Lu Y. Laser directed energy deposition of Zr-based bulk metallic glass composite with tensile strength. Mater Lett. 2019;247:79–81. DOI:https://doi.org/10.1016/j.matlet.2019.03.111.
- Zhang C, Wang W, Xing W, et al. Understanding on toughening mechanism of bioinspired bulk metallic glassy composites by thermal spray additive manufacturing. Scripta Mater. 2020;177:112–117. DOI:https://doi.org/10.1016/j.scriptamat.2019.10.017.
- Sohrabi N, Jhabvala J, Kurtuldu G, et al. Additive manufacturing of a precious bulk metallic glass. Appl Mater Today. 2021;24:101080. DOI:https://doi.org/10.1016/j.apmt.2021.101080.
- Zhang P, Zhang C, Ouyang D, et al. Enhancement of plasticity and toughness of 3D printed binary Zr50Cu50 bulk metallic glass composite by deformation-induced martensitic transformation. Scripta Mater. 2021;192:7–12. DOI:https://doi.org/10.1016/j.scriptamat.2020.09.044.
- Lu Y, Su S, Zhang S, et al. Controllable additive manufacturing of gradient bulk metallic glass composite with high strength and tensile ductility. Acta Mater. 2021;206:116632. DOI:https://doi.org/10.1016/j.actamat.2021.116632.