Designing hard, low-refractive-index lossy materials for super wear-resistant absorbers

References

• Shahsafi A, Joe G, Brandt S, et al. Wide-angle spectrally selective absorbers and thermal emitters based on inverse opals. ACS Photonics. 2019;6(11):2607–2611.
   Web of Science ®Google Scholar
• Yang Z, Guo X, Lu S, et al. Investigation of stray radiation suppression in infrared imaging system using a novel broadband and high-absorption ceramic coating. Appl Sci. 2021;11(11):4952.
   Google Scholar
• Chaudhary K, Singh G, Ramkumar J, et al. Optically transparent protective coating for ITO-coated PET-based microwave metamaterial absorbers. IEEE Trans Compon Packag Manuf Technol. 2020;10(3):378–388.
   Web of Science ®Google Scholar
• Jia H, Xu T, Yao W, et al. Fabrication and optical behavior of AuCuSi amorphous alloy film. Nanotechnology. 2021;32(33):335702.
   Web of Science ®Google Scholar
• Gao X-H, Qiu X-L, Shen Y-Q, et al. A novel TiC–ZrB2/ZrB2/Al2O3 multilayer high temperature solar selective absorbing coating: microstructure, optical properties and failure mechanism. Sol Energy Mater Sol Cells. 2019;203:110187.
   Web of Science ®Google Scholar
• Yang D, Zhao X, Liu Y, et al. Enhanced thermal stability of solar selective absorber based on nano-multilayered AlCrSiO films. Sol Energy Mater Sol Cells. 2020;207:110331.
   Web of Science ®Google Scholar
• Boddupalli N, Singh G, Chandra L, et al. Dealing with dust–some challenges and solutions for enabling solar energy in desert regions. Sol Energy. 2017;150:166–176.
   Web of Science ®Google Scholar
• Wiesinger F, San Vicente G, Fernandez-Garcia A, et al. Sandstorm erosion testing of anti-reflective glass coatings for solar energy applications. Sol Energy Mater Sol Cells. 2018;179:10–16.
   Web of Science ®Google Scholar
• Wulan Q, He D, Zhang T, et al. Salisbury screen absorbers using epsilon-near-zero substrate. Mater Res Express. 2021;8(1):016406.
   Web of Science ®Google Scholar
• Kats MA, Capasso F. Optical absorbers based on strong interference in ultra-thin films. Laser Photonics Rev. 2016;10(5):735–749.
   Web of Science ®Google Scholar
• Sievenpiper DF. High-impedance electromagnetic surfaces. Los Angeles: University of California; 1999.
   Google Scholar
• Sánchez-Palencia P, García G, Conesa JC, et al. Spinel-type nitride compounds with improved features as solar cell absorbers. Acta Mater. 2020;197:316–329.
   Web of Science ®Google Scholar
• Sani E, Failla S, Sciti D. Dark alumina for novel solar receivers. Scr Mater. 2020;176:58–62.
   Web of Science ®Google Scholar
• Sani E, Sciti D, Capiani C, et al. Colored zirconia with high absorbance and solar selectivity. Scr Mater. 2020;186:147–151.
   Web of Science ®Google Scholar
• Kats MA, Blanchard R, Genevet P, et al. Nanometre optical coatings based on strong interference effects in highly absorbing media. Nat Mater. 2013;12(1):20–24.
   PubMed Web of Science ®Google Scholar
• Kats MA, Byrnes SJ, Blanchard R, et al. Enhancement of absorption and color contrast in ultra-thin highly absorbing optical coatings. Appl Phys Lett. 2013;103(10):101104.
   Web of Science ®Google Scholar
• Stewart JW, Vella JH, Li W, et al. Ultrafast pyroelectric photodetection with on-chip spectral filters. Nat Mater. 2020;19(2):158–162.
   PubMed Web of Science ®Google Scholar
• Ghobadi A, Hajian H, Butun B, et al. Strong light–matter interaction in lithography-free planar metamaterial perfect absorbers. ACS Photonics. 2018;5(11):4203–4221.
   Web of Science ®Google Scholar
• Fang T-H, Chang W-J, Lin C-M, et al. Cyclic nanoindentation of semiconductor and metal thin films. Int J Mod Phys B. 2009;23(30):5639–5647.
   Web of Science ®Google Scholar
• Chirumamilla M, Roberts AS, Ding F, et al. Multilayer tungsten-alumina-based broadband light absorbers for high-temperature applications. Opt Mater Express. 2016;6(8):2704–2714.
   Web of Science ®Google Scholar
• Sellappan P, Rouxel T, Celarie F, et al. Composition dependence of indentation deformation and indentation cracking in glass. Acta Mater. 2013;61(16):5949–5965.
   Web of Science ®Google Scholar
• Liu C, Liu Z, Wang B. Modification of surface morphology to enhance tribological properties for CVD coated cutting tools through wet micro-blasting post-process. Ceram Int. 2018;44(3):3430–3439.
   Web of Science ®Google Scholar
• Jang JH, Lee C-H, Heo Y-U, et al. Stability of (Ti, M) C (M = Nb, V, Mo and W) carbide in steels using first-principles calculations. Acta Mater. 2012;60(1):208–217.
   Web of Science ®Google Scholar
• Cumming G, Fidler F, Vaux DL. Error bars in experimental biology. J Cell Biol. 2007;177(1):7–11.
   PubMed Web of Science ®Google Scholar
• Li Z, Butun S, Aydin K. Large-area, lithography-free super absorbers and color filters at visible frequencies using ultrathin metallic films. Acs Photonics. 2015;2(2):183–188.
   Web of Science ®Google Scholar
• Pat S, Özen S, Şenay V, et al. A study on optical, morphological and mechanical properties of Al2O3 ultra-thin films deposited by RF reactive magnetron sputtering. Int J Surf Sci Eng. 2015;9(5):415–424.
   Web of Science ®Google Scholar
• Olayinka A, Esther A, Philip O. Process parameters optimization to maximize surface roughness using response surface methodology of TiC thin film grown by radio frequency magnetron sputtering. Mater Today Proc. 2021;44:1221–1226.
   Google Scholar
• Chen Z, Tian W, Zhang X, et al. Effect of deposition parameters on surface roughness and consequent electromagnetic performance of capacitive RF MEMS switches: a review. J Micromech Microeng. 2017;27(11):113003.
   Web of Science ®Google Scholar
• Ding H, Li Y, Lu J, et al. Synthesis of MAX phases Nb2CuC and Ti2 (Al0.1Cu0.9) N by A-site replacement reaction in molten salts. Mater Res Lett. 2019;7(12):510–516.
   Web of Science ®Google Scholar
• Zhan Z, Chen Y, Radovic M, et al. Non-classical crystallographic slip in a ternary carbide–Ti2AlC. Mater Res Lett. 2020;8(7):275–281.
   Web of Science ®Google Scholar
• Zhan Z, Radovic M, Srivastava A. On the non-classical crystallographic slip in Tin+1AlCn MAX phases. Scr Mater. 2021;194:113698.
   Web of Science ®Google Scholar
• Esquivel J, Murdoch H, Darling K, et al. Excellent corrosion resistance and hardness in Al alloys by extended solid solubility and nanocrystalline structure. Mater Res Lett. 2018;6(1):79–83.
   Web of Science ®Google Scholar
• Han X, Gong X. In situ, one-pot method to prepare robust superamphiphobic cotton fabrics for high buoyancy and good antifouling. ACS Appl Mater Interfaces. 2021;13(26):31298–31309.
   PubMed Web of Science ®Google Scholar
• Wei DW, Wei H, Gauthier AC, et al. Superhydrophobic modification of cellulose and cotton textiles: methodologies and applications. J Bioresour Bioprod. 2020;5(1):1–15.
   Google Scholar
• Guan F, Song Z, Xin F, et al. Preparation of hydrophobic transparent paper via using polydimethylsiloxane as transparent agent. J Bioresour Bioprod. 2020;5(1):37–43.
   Google Scholar
• Xie J, Fan F, Chen Y, et al. Gram-scale synthesis of porous three-dimensional carbon nanosheets for high efficiency clean water production. Mater Res Lett. 2021;9(4):175–181.
   Web of Science ®Google Scholar
• Sarker P, Harrington T, Toher C, et al. High-entropy high-hardness metal carbides discovered by entropy descriptors. Nat Commun. 2018;9(1):1–10.
   PubMedGoogle Scholar
• Harrington TJ, Gild J, Sarker P, et al. Phase stability and mechanical properties of novel high entropy transition metal carbides. Acta Mater. 2019;166:271–280.
   Web of Science ®Google Scholar
• Boidin R, Halenkovič T, Nazabal V, et al. Pulsed laser deposited alumina thin films. Ceram Int. 2016;42(1):1177–1182.
   Web of Science ®Google Scholar
• Palm KJ, Murray JB, Narayan TC, et al. Dynamic optical properties of metal hydrides. ACS Photonics. 2018;5(11):4677–4686.
   Web of Science ®Google Scholar
• Duszová A, Halgaš R, Bľanda M, et al. Nanoindentation of WC–Co hardmetals. J Eur Ceram Soc. 2013;33(12):2227–2232.
   Web of Science ®Google Scholar
• Gu X, Yang L, Ma X, et al. Ta addition effects on the structure, mechanical and thermal properties of sputtered Hf-Ta-C film. Ceram Int. 2019;45(12):15596–15602.
   Web of Science ®Google Scholar
• Hans K, Latha S, Bera P, et al. Hafnium carbide based solar absorber coatings with high spectral selectivity. Sol Energy Mater Sol Cells. 2018;185:1–7.
   Web of Science ®Google Scholar
• Gao X-H, Wang C-B, Guo Z-M, et al. Structure, optical properties and thermal stability of Al2O3-WC nanocomposite ceramic spectrally selective solar absorbers. Opt Mater. 2016;58:219–225.
   Web of Science ®Google Scholar
• Kondaiah P, Niranjan K, John S, et al. Tantalum carbide based spectrally selective coatings for solar thermal absorber applications. Sol Energy Mater Sol Cells. 2019;198:26–34.
   Web of Science ®Google Scholar
• Jansson U, Lewin E. Sputter deposition of transition-metal carbide films—a critical review from a chemical perspective. Thin Solid Films. 2013;536:1–24.
   Web of Science ®Google Scholar
• de Monteynard A, Luo H, Chehimi M, et al. The structure, morphology, and mechanical properties of Ta-Hf-C coatings deposited by Pulsed direct current reactive magnetron sputtering. Coatings. 2020;10(3):212.
   Web of Science ®Google Scholar
• Maksakova O, Pogrebnjak A, Khomenko L. editors. Composition-structure-property relations in TiZr-C nanocomposites. 2020 IEEE 10th International Conference Nanomaterials: Applications & Properties (NAP), IEEE; 2020.
   Google Scholar