Columnar grain width control for SS316L via hatch spacing manipulation in laser powder bed fusion

References

• Todaro CJ, Easton MA, Qiu D, et al. Grain structure control during metal 3D printing by high-intensity ultrasound. Nat Commun. 2020;11(1):1–9.
   PubMed Web of Science ®Google Scholar
• Zhao R, Chen C, Shuai S, et al. Enhanced mechanical properties of Ti6Al4V alloy fabricated by laser additive manufacturing under static magnetic field. Mater Res Lett. 2022;10(8):530–538.
   Web of Science ®Google Scholar
• Plotkowski A, Ferguson J, Stump B, et al. A stochastic scan strategy for grain structure control in complex geometries using electron beam powder bed fusion. Addit Manuf. 2021;46:102092.
   Web of Science ®Google Scholar
• Gokcekaya O, Ishimoto T, Hibino S, et al. Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy. Acta Mater. 2021;212:116876.
   Web of Science ®Google Scholar
• Ni M, Chen C, Wang X, et al. Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing. Mater Sci Eng A. 2017;701:344–351.
   Web of Science ®Google Scholar
• Wu B, Pan Z, Ding D, et al. Effects of heat accumulation on microstructure and mechanical properties of Ti6Al4V alloy deposited by wire arc additive manufacturing. Addit Manuf. 2018;23:151–160.
   Web of Science ®Google Scholar
• Kumar P, Jayaraj R, Suryawanshi J, et al. Fatigue strength of additively manufactured 316L austenitic stainless steel. Acta Mater. 2020;199:225–239.
   Web of Science ®Google Scholar
• Laleh M, Hughes AE, Xu W, et al. On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting. Corros Sci. 2019;161:108189.
   Web of Science ®Google Scholar
• Shi R, Khairallah SA, Roehling TT, et al. Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy. Acta Mater. 2020;184:284–305.
   Web of Science ®Google Scholar
• Choo H, Sham KL, Bohling J, et al. Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel. Mater Des. 2019;164:107534.
   Web of Science ®Google Scholar
• Sabzi HE, Hernandez-Nava E, Li XH, et al. Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering. Mater Des. 2021;212:110246.
   Web of Science ®Google Scholar
• Sun SH, Ishimoto T, Hagihara K, et al. Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting. Scr Mater. 2019;159:89–93.
   Web of Science ®Google Scholar
• Li W, Liu J, Zhou Y, et al. Effect of substrate preheating on the texture, phase and nanohardness of a Ti-45Al-2Cr-5Nb alloy processed by selective laser melting. Scr Mater. 2016;118:13–18.
   Web of Science ®Google Scholar
• Hocine S, Van Swygenhoven H, Van Petegem S, et al. Operando X-ray diffraction during laser 3D printing. Mater Today. 2020;34:30–40.
   Web of Science ®Google Scholar
• Leicht A, Yu CH, Luzin V, et al. Effect of scan rotation on the microstructure development and mechanical properties of 316L parts produced by laser powder bed fusion. Mater Charact. 2020;163:110309.
   Web of Science ®Google Scholar
• Salman OO, Brenne F, Niendorf T, et al. Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting. J Manuf Process. 2019;45:255–261.
   Web of Science ®Google Scholar
• Aota LS, Bajaj P, Zilnyk KD, et al. Recrystallization kinetics, mechanisms, and topology in alloys processed by laser powder-bed fusion: AISI 316L stainless steel as example. Materialia. 2021;20:101236.
   Google Scholar
• Sun Z, Chueh YH, Li L. Multiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes. Addit Manuf. 2020;35:101448.
   Web of Science ®Google Scholar
• Mahmoudi M, Tapia G, Franco B, et al. On the printability and transformation behavior of nickel-titanium shape memory alloys fabricated using laser powder-bed fusion additive manufacturing. J Manuf Process. 2018;35:672–680.
   Web of Science ®Google Scholar
• Fu J, Qu S, Ding J, et al. Comparison of the microstructure, mechanical properties and distortion of stainless steel 316L fabricated by micro and conventional laser powder bed fusion. Addit Manuf. 2021;44:102067.
   Web of Science ®Google Scholar
• Stanke FE, Kino GS. A unified theory for elastic wave propagation in polycrystalline materials. Acoust Soc Am. 1984;75(3):665–681.
   Web of Science ®Google Scholar
• Huang N, Cook OJ, Smithson RL, et al. Use of ultrasound to identify microstructure-property relationships in 316 stainless steel fabricated with binder jet additive manufacturing. Addit Manuf. 2022;51:102591.
   Web of Science ®Google Scholar
• Dovgyy B, Piglione A, Hooper PA, et al. Comprehensive assessment of the printability of CoNiCrFeMn in laser powder bed fusion. Mater Des. 2020;194:108845.
   Web of Science ®Google Scholar
• Sofinowski KA, Raman S, Wang X, et al. Layer-wise engineering of grain orientation (LEGO) in laser powder bed fusion of stainless steel 316L. Addit Manuf. 2021;38:101809.
   Web of Science ®Google Scholar
• Thijs L, Kempen K, Kruth JP, et al. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder. Acta Mater. 2013;61(5):1809–1819.
   Web of Science ®Google Scholar