Unravelling the origin of multiple cracking in an additively manufactured Haynes 230

References

• Wong KV, Hernandez A. A review of additive manufacturing. Int Sch Res Notices. 2012;2012:1–10.
   Google Scholar
• Dilberoglu UM, Gharehpapagh B, Yaman U, et al. The role of additive manufacturing in the era of industry 4.0. Proc Manuf. 2017;11:545–554.
   Google Scholar
• Attallah MM, Jennings R, Wang X, et al. Additive manufacturing of Ni-based superalloys: the outstanding issues. MRS Bull. 2016;41:758–764.
   Web of Science ®Google Scholar
• Panwisawas C, Tang YT, Reed RC. Metal 3D printing as a disruptive technology for superalloys. Nat Commun. 2020;11:1–4.
   PubMed Web of Science ®Google Scholar
• Cheng B, Gu J, Song M. An investigation of the microstructural evolution and tensile properties of a nickel-based GH648 superalloy manufactured through selective laser melting. Mater Sci Eng A. 2020;790:139704.
   Web of Science ®Google Scholar
• Wang X, Carter LN, Pang B, et al. Microstructure and yield strength of SLM-fabricated CM247LC Ni-superalloy. Acta Mater. 2017;128:87–95.
   Web of Science ®Google Scholar
• Tang YT, Panwisawas C, Ghoussoub JN, et al. Alloys-by-design: application to new superalloys for additive manufacturing. Acta Mater. 2021;202:417–436.
   Web of Science ®Google Scholar
• Chauvet E, Kontis P, Jägle EA, et al. Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron beam melting. Acta Mater. 2018;142:82–94.
   Web of Science ®Google Scholar
• Ramsperger M, Singer RF, Körner C. Microstructure of the nickel-base superalloy CMSX-4 fabricated by selective electron beam melting. Metall Mater Trans A. 2016;47:1469–1480.
   Web of Science ®Google Scholar
• Lee YS, Kirka MM, Kim S, et al. Asymmetric cracking in Mar-M247 alloy builds during electron beam powder bed fusion additive manufacturing. Metall Mater Trans A. 2018;49:5065–5079.
   Web of Science ®Google Scholar
• Carter LN, Attallah MM, Reed RC. Laser powder Bed fabrication of nickel-base superalloys: influence of parameters; characterisation, quantification and mitigation of cracking. Superalloys. 2012;2012:577–586.
   Google Scholar
• Peng H, Shi Y, Gong S, et al. Microstructure, mechanical properties and cracking behaviour in a γ′-precipitation strengthened nickel-base superalloy fabricated by electron beam melting. Mater Des. 2018;159:155–169.
   Web of Science ®Google Scholar
• Murray SP, Pusch KM, Polonsky AT, et al. A defect-resistant Co–Ni superalloy for 3D printing. Nat Commun. 2020;11:1–11.
   PubMed Web of Science ®Google Scholar
• Lu N, Lei Z, Hu K, et al. Hot cracking behavior and mechanism of a third-generation Ni-based single-crystal superalloy during directed energy deposition. Addit Manuf. 2020;34:101228.
   Web of Science ®Google Scholar
• Chen Y, Lu F, Zhang K, et al. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling. J Alloys Compd. 2016;670:312–321.
   Web of Science ®Google Scholar
• Griffiths S, Tabasi HG, Ivas T, et al. Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy. Addit Manuf. 2020;36:101443.
   Web of Science ®Google Scholar
• Ramirez AJ, Lippold JC. High temperature behavior of Ni-base weld metal: part II–insight into the mechanism for ductility dip cracking. Mater Sci Eng A. 2004;380:245–258.
   Web of Science ®Google Scholar
• Ghoussoub JN, Tang YT, Panwisawas C, et al. On the influence of alloy chemistry and processing conditions on additive manufacturability of Ni-based superalloys. Superalloys. 2020;2020:153–162.
   Google Scholar
• Yang B, Shang Z, Ding J, et al. Investigation of strengthening mechanisms in an additively manufactured Haynes 230 alloy. Acta Mater. 2022;222:117404.
   Web of Science ®Google Scholar
• Xia T, Wang R, Bi Z, et al. Microstructure and mechanical properties of carbides reinforced nickel matrix alloy prepared by selective laser melting. Materials. 2021;14:4792.
   PubMedGoogle Scholar
• Kontis P, Chauvet E, Peng Z, et al. Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys. Acta Mater. 2019;177:209–221.
   Web of Science ®Google Scholar
• Xiang S, Mao S, Shen Z, et al. Site preference of metallic elements in M23C6 carbide in a Ni-based single crystal superalloy. Mater Des. 2017;129:9–14.
   Web of Science ®Google Scholar
• Bai G, Li J, Hu R, et al. Effect of thermal exposure on the stability of carbides in Ni-Cr-W based superalloy. Mater Sci Eng A. 2011;528:2339–2344.
   Web of Science ®Google Scholar
• Wang D, Zhang J, Lou LH. Formation and stability of nano-scaled M23C6 carbide in a directionally solidified Ni-base superalloy. Mater Charact. 2009;60:1517–1521.
   Web of Science ®Google Scholar
• Hariharan A, Lu L, Risse J, et al. Misorientation-dependent solute enrichment at interfaces and its contribution to defect formation mechanisms during laser additive manufacturing of superalloys. Phys Rev Mater. 2019;3:123602.
   Web of Science ®Google Scholar
• Tomus D, Jarvis T, Wu X, et al. Controlling the microstructure of Hastelloy-X components manufactured by selective laser melting. Phys Procedia. 2013;41:823–827.
   Google Scholar
• Han Q, Gu Y, Soe S, et al. Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing. Opt Laser Technol. 2020;124:105984.
   Web of Science ®Google Scholar
• Tomus D, Rometsch PA, Heilmaier M, et al. Effect of minor alloying elements on crack-formation characteristics of Hastelloy-X manufactured by selective laser melting. Addit Manuf. 2017;16:65–72.
   Web of Science ®Google Scholar
• Xu Z, Jiang L, Dong J, et al. The effect of silicon on precipitation and decomposition behaviors of M6C carbide in a Ni–Mo–Cr superalloy. J Alloys Compd. 2015;620:197–203.
   Web of Science ®Google Scholar
• Wang YS, Guan XM, Ye HQ, et al. Effect of silicon on grain boundary carbide precipitation and properties of a cobalt-free wrought nickel-base superalloy. Superalloys. 1980;20:63–70.
   Google Scholar
• Detrois M, Pei Z, Rozman KA, et al. Partitioning of tramp elements Cu and Si in a Ni-based superalloy and their effect on creep properties. Materialia. 2020;13:100843.
   Google Scholar
• Lewis MH, Hattersley B. Precipitation of M23C6 in austenitic steels. Acta Metall. 1965;13:1159–1168.
   Google Scholar
• Oanh NTH, Viet NH. Precipitation of M23C6 secondary carbide particles in Fe-Cr-Mn-C alloy during heat treatment process. Metals. 2020;10:157.
   Web of Science ®Google Scholar
• Zhang J, Singer RF. Hot tearing of nickel-based superalloys during directional solidification. Acta Mater. 2002;50:1869–1879.
   Web of Science ®Google Scholar
• Després A, Antonov S, Mayer C, et al. On the role of boron, carbon and zirconium on hot cracking and creep resistance of an additively manufactured polycrystalline superalloy. Materialia. 2021;19:101193.
   Google Scholar
• Guo B, Zhang Y, Yang Z, et al. Cracking mechanism of Hastelloy X superalloy during directed energy deposition additive manufacturing. Addit Manuf. 2022;55:102792.
   Web of Science ®Google Scholar
• Zhang W, Liu F, Liu F, et al. Microstructural evolution and cracking behavior of Hastelloy X superalloy fabricated by laser directed energy deposition. J Alloys Compd. 2022;905:164179.
   Web of Science ®Google Scholar