Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al₄C₃ nanorods

References

• Gu D, Shi X, Poprawe R, et al. Material-structure-performance integrated laser-metal additive manufacturing. Science. 2021;372(6545):1487.
   Web of Science ®Google Scholar
• du Plessis A, Broeckhoven C, Yadroitsava I, et al. Beautiful and functional: A review of biomimetic design in additive manufacturing. Addit Manuf. 2019;27:408–427.
   Web of Science ®Google Scholar
• Li J, Qu H, Bai J. Grain boundary engineering during the laser powder bed fusion of TiC/316L stainless steel composites: New mechanism for forming TiC-induced special grain boundaries. Acta Mater. 2021;226, Article 117605.
   Web of Science ®Google Scholar
• Wu H, Zhang D, Yang B, et al. Microstructural evolution and defect formation in a powder metallurgy nickel-based superalloy processed by selective laser melting. J Mater Sci Technol. 2020;36:7–17.
   Web of Science ®Google Scholar
• Zhao R, Chen C, Shuai S, et al. Enhanced mechanical properties of Ti6Al4 V alloy fabricated by laser additive manufacturing under static magnetic field. Mater Res Lett. 2022;10(8):530–538.
   Web of Science ®Google Scholar
• Liang J, Lei Z, Chen Y, et al. Formability, microstructure, and thermal crack characteristics of selective laser melting of ZK60 magnesium alloy. Mater Sci Eng A. 2022;839:142858.
   Web of Science ®Google Scholar
• Qin Z, Kang N, Zong H, et al. Improved fatigue properties of laser powder bed fusion of Al–4.74Mg–0.70Sc–0.32Zr alloy via hot isostatic pressing. Mater Res Lett. 2022;10(11):720–727.
   Web of Science ®Google Scholar
• Zhou W, Zhou Z, Guo S, et al. Structural evolution mechanism during 3D printing of MXene-reinforced metal matrix composites. Compos Commun. 2022;29
   Web of Science ®Google Scholar
• Aboulkhair NT, Everitt NM, Ashcroft I, et al. Reducing porosity in AlSi10Mg parts processed by selective laser melting. Addit Manuf. 2014;1-4:77–86.
   Google Scholar
• Tan Q, Zhang J, Sun Q, et al. Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles. Acta Mater. 2020;196:1–16.
   Web of Science ®Google Scholar
• Fiocchi J, Tuissi A, Biffi CA. Heat treatment of aluminium alloys produced by laser powder bed fusion: A review. Mater Des. 2021;204.
   Web of Science ®Google Scholar
• Zhao L, Song L, Macías JGS, et al. Review on the correlation between microstructure and mechanical performance for laser powder Bed fusion AlSi10Mg. Addit Manuf. 2022;56, Article 102914.
   Web of Science ®Google Scholar
• Chen B, Moon SK, Yao X, et al. Strength and strain hardening of a selective laser melted AlSi10Mg alloy. Scr Mater. 2017;141:45–49.
   Web of Science ®Google Scholar
• Wan J, Qing J, Xu M. Designing a novel graphitic white iron for metal-to-metal wear systems. Metall Mater Trans A. 2019;50(3):1162–1174.
   Google Scholar
• Yamagata H, Kasprzak W, Aniolek M, et al. The effect of average cooling rates on the microstructure of the Al–20% Si high pressure die casting alloy used for monolithic cylinder blocks. J Mater Process Technol. 2008;203(1-3):333–341.
   Web of Science ®Google Scholar
• Zhao L, Santos Macías JG, Ding L, et al. Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions. Mater Sci Eng A. 2019;764.
   Web of Science ®Google Scholar
• Maconachie T, Leary M, Zhang J, et al. Effect of build orientation on the quasi-static and dynamic response of SLM AlSi10Mg. Mater Sci Eng A. 2020;788.
   Web of Science ®Google Scholar
• Xiao YK, Bian ZY, Wu Y, et al. Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting. J Alloys Compd. 2019;798:644–655.
   Web of Science ®Google Scholar
• Liu G, Zhang GJ, Jiang F, et al. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility. Nat Mater. 2013;12(4):344–350.
   PubMed Web of Science ®Google Scholar
• Li Z, Zhang Y, Zhang Z, et al. A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites. Nat Commun. 2022;13:1.
   PubMed Web of Science ®Google Scholar
• Wang Z, Zhuo L, Yin E, et al. Microstructure evolution and properties of nanoparticulate SiC modified AlSi10Mg alloys. Mater Sci Eng A. 2021;808:140864.
   Web of Science ®Google Scholar
• Li XP, Wang XJ, Saunders M, et al. A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility. Acta Mater. 2015;95:74–82.
   Web of Science ®Google Scholar
• Yin J, Liu W, Cao Y, et al. Rapid prediction of the relationship between processing parameters and molten pool during selective laser melting of cobalt-chromium alloy powder. Simulation and Experiment. J Alloys Compd. 2022;892.
   Web of Science ®Google Scholar
• Wu J, Wang L, An X. Numerical analysis of residual stress evolution of AlSi10Mg manufactured by selective laser melting. Optik (Stuttg). 2017;137:65–78.
   Web of Science ®Google Scholar
• Li X, Zhang Z, Peng Y, et al. In situ synthesized nano-Al4C3 reinforced aluminum matrix composites via friction stir processing. J Mater Res Technol. 2021;14:2658–2664.
   Google Scholar
• Chen B, Jia L, Li S, et al. In situ synthesized Al4C3 nanorods with excellent strengthening effect in aluminum matrix composites. Adv Eng Mater. 2014;16(8):972–975.
   Web of Science ®Google Scholar
• Albu M, Krisper R, Lammer J, et al. Microstructure evolution during in-situ heating of AlSi10Mg alloy powders and additive manufactured parts. Addit Manuf. 2020;36.
   Web of Science ®Google Scholar
• Jiang Y, Tan Z, Fan G, et al. Reaction-free interface promoting strength-ductility balance in graphene nanosheet/Al composites. Carbon N Y. 2020;158:449–455.
   Web of Science ®Google Scholar
• Han T, Wang F, Li J, et al. Simultaneously enhanced strength and ductility of Al matrix composites through the introduction of intragranular nano-sized graphene nanoplates. Compos Part B Eng. 2021;212:108700.
   Web of Science ®Google Scholar
• Yang L, Han T, Zhang X, et al. Cu Atoms-assisted rapid fabrication of graphene/Al composites with tailored strain-delocalization effect by spark plasma sintering. Mater Res Lett. 2022;10(9):567–574.
   Web of Science ®Google Scholar
• Chen H, Patel S, Vlasea M, et al. Enhanced tensile ductility of an additively manufactured AlSi10Mg alloy by reducing the density of melt pool boundaries. Scr Mater. 2022;221.
   Google Scholar
• Lam LP, Zhang DQ, Liu ZH, et al. Phase analysis and microstructure characterisation of AlSi10Mg parts produced by Selective Laser Melting. Virtual Phys Prototyp. 2015;10(4):207–215.
   Web of Science ®Google Scholar
• Xu T, Feng Y, Jin Z, et al. Determination of the maximum strain–hardening exponent. Mater Sci Eng A. 2012;550:80–86.
   Web of Science ®Google Scholar
• C/tceres CH, Selling BI. Casting defects and the tensile properties of an A1-Si-Mg alloy. Mater Sci Eng A. 1996;A220:109–116.
   Google Scholar
• Yan Q, Song B, Shi Y. Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting. J Mater Sci Technol. 2020;41:199–208.
   Web of Science ®Google Scholar
• Kocks UF, Mecking H. Physics and phenomenology of strain hardening: the FCC case. Prog Mater Sci. 2003;48(3):171–273.
   Web of Science ®Google Scholar
• Zhu YT, Wu XL. Ductility and plasticity of nanostructured metals: differences and issues. Mater Today Nano. 2018;2:15–20.
   Google Scholar
• Kempen K, Thijs L, Van Humbeeck J, et al. Mechanical properties of AlSi10Mg produced by selective laser melting. Phys Proc. 2012;39:439–446.
   Google Scholar
• Read N, Wang W, Essa K, et al. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development. Mater Des. 2015;65:417–424.
   Web of Science ®Google Scholar
• Aboulkhair NT, Maskery I, Tuck C, et al. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: the effect of a conventional T6-like heat treatment. Mater Sci Eng A. 2016;667:139–146.
   Web of Science ®Google Scholar
• Li W, Li S, Liu J, et al. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism. Mater Sci Eng A. 2016;663:116–125.
   Web of Science ®Google Scholar
• Tradowsky U, White J, Ward RM, et al. Selective laser melting of AlSi10Mg: influence of post-processing on the microstructural and tensile properties development. Mater Des. 2016;105:212–222.
   Web of Science ®Google Scholar
• Takata N, Kodaira H, Sekizawa K, et al. Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments. Mater Sci Eng A. 2017;704:218–228.
   Web of Science ®Google Scholar
• Uzan NE, Shneck R, Yeheskel O, et al. Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM). Mater Sci Eng A. 2017;704:229–237.
   Web of Science ®Google Scholar
• Wang L, Jiang X, Guo M, et al. Characterisation of structural properties for AlSi10Mg alloys fabricated by selective laser melting. Mater Sci Technol. 2017;33(18):2274–2282.
   Web of Science ®Google Scholar
• Chen B, Moon SK, Yao X, et al. Comparison study on additive manufacturing (AM) and powder metallurgy (PM) AlSi10Mg alloys. Jom. 2018;70(5):644–649.
   Web of Science ®Google Scholar
• Iturrioz A, Gil E, Petite MM, et al. Selective laser melting of AlSi10Mg alloy: influence of heat treatment condition on mechanical properties and microstructure. Weld World. 2018;62(4):885–892.
   Web of Science ®Google Scholar
• Wang LF, Sun J, Yu XL, et al. Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment. Mater Sci Eng A. 2018;734:299–310.
   Web of Science ®Google Scholar
• Delahaye J, Tchuindjang JT, Lecomte-Beckers J, et al. Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by selective laser melting. Acta Mater. 2019;175:160–170.
   Web of Science ®Google Scholar
• Girelli L, Tocci M, Gelfi M, et al. Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy. Mater Sci Eng A. 2019;739:317–328.
   Web of Science ®Google Scholar
• Han Q, Jiao Y. Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting. Int J Adv Manuf Technol. 2019;102(9-12):3315–3324.
   Web of Science ®Google Scholar
• Wang P, Lei H, Zhu X, et al. Influence of manufacturing geometric defects on the mechanical properties of AlSi10Mg alloy fabricated by selective laser melting. J Alloys Compd. 2019;789:852–859.
   Web of Science ®Google Scholar
• Xiong ZH, Liu SL, Li SF, et al. Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy. Mater Sci Eng A. 2019;740-741:148–156.
   Web of Science ®Google Scholar
• Zhuo L, Wang Z, Zhang H, et al. Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy. Mater Lett. 2019;234:196–200.
   Web of Science ®Google Scholar
• Yang T, Liu T, Liao W, et al. Laser powder bed fusion of AlSi10Mg: Influence of energy intensities on spatter and porosity evolution, microstructure and mechanical properties. J Alloys Compd. 2020;849.
   PubMed Web of Science ®Google Scholar
• Zhang H, Wang Y, Wang JJ, et al. Achieving superior mechanical properties of selective laser melted AlSi10Mg via direct aging treatment. J Mater Sci Technol. 2021;108:226–235.
   Web of Science ®Google Scholar
• Ahn SY, Moon J, Choi YT, et al. A precipitation-hardened AlSi10Mg alloy fabricated using selective laser melting. Mater Sci Eng A. 2022;844.
   Web of Science ®Google Scholar
• Chen S, Tan Q, Gao W, Wu G, Fan J, Feng Z, et al. Effect of heat treatment on the anisotropy in mechanical properties of selective laser melted AlSi10Mg. Mater Sci Eng A. 2022;858.
   Google Scholar