Achieving an extra-high-strength yet ductile steel by synergistic effects of TRIP and maraging

References

• Jiang S, Wang H, Wu Y, et al. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation. Nature. 2017;544:460–464.
   PubMed Web of Science ®Google Scholar
• He BB, Hu B, Yen HW, et al. High dislocation density–induced large ductility in deformed and partitioned steels. Science. 2017;357:1029–1032.
   PubMed Web of Science ®Google Scholar
• Gao B, Lai Q, Cao Y, et al. Ultrastrong low-carbon nanosteel produced by heterostructure and interstitial mediated warm rolling. Sci Adv. 2020;6:eaba8169.
   PubMed Web of Science ®Google Scholar
• Li H, Zong H, Li S, et al. Uniting tensile ductility with ultrahigh strength via composition undulation. Nature. 2022;604:273–279.
   PubMedGoogle Scholar
• Liu T, Cao Z, Wang H, et al. A new 2.4 GPa extra-high strength steel with good ductility and high toughness designed by synergistic strengthening of nano-particles and high-density dislocations. Scr Mater. 2020;178:285–289.
   Google Scholar
• Yang MX, Yang G, Liu ZD, et al. Significant enhancement of strength in a lamellar-type nanostructured maraging steel subjected to equal-channel angular pressing for 12 passes. Mater Sci Eng Struct Mater Prop Microstruct Process. 2012;550:429–433.
   Google Scholar
• Raabe D, Ponge D, Dmitrieva O, et al. Nanoprecipitate-hardened 1.5 GPa steels with unexpected high ductility. Scr Mater. 2009;60:1141–1144.
   Web of Science ®Google Scholar
• Dmitrieva O, Choi P, Gerstl SSA, et al. Pulsed-laser atom probe studies of a precipitation hardened maraging TRIP steel. Ultramicroscopy. 2011;111:623–627.
   PubMedGoogle Scholar
• Raabe D, Sandlöbes S, Millán J, et al. Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: a pathway to ductile martensite. Acta Mater. 2013;61:6132–6152.
   Web of Science ®Google Scholar
• Wang M-M, Tasan CC, Ponge D, et al. Smaller is less stable: size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels. Acta Mater. 2014;79:268–281.
   Web of Science ®Google Scholar
• Wang M-M, Tasan CC, Ponge D, et al. Nanolaminate transformation-induced plasticity–twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance. Acta Mater. 2015;85:216–228.
   Web of Science ®Google Scholar
• Wang M-M, Tasan CC, Ponge D, et al. Spectral TRIP enables ductile 1.1 GPa martensite. Acta Mater. 2016;111:262–272.
   Web of Science ®Google Scholar
• Zhang H, Sun M, Liu Y, et al. Ultrafine-grained dual-phase maraging steel with high strength and excellent cryogenic toughness. Acta Mater. 2021;211:116878.
   Web of Science ®Google Scholar
• Jiao ZB, Luan JH, Miller MK, et al. Effects of Mn partitioning on nanoscale precipitation and mechanical properties of ferritic steels strengthened by NiAl nanoparticles. Acta Mater. 2015;84:283–291.
   Google Scholar
• Wang J-S, Mulholland MD, Olson GB, et al. Prediction of the yield strength of a secondary-hardening steel. Acta Mater. 2013;61:4939–4952.
   Web of Science ®Google Scholar
• Olson G, Cohen M. Mechanism for strain-induced nucleation of martensitic transformations. J Common Met. 1972;28:107–118.
   Google Scholar
• Huang CX, Yang G, Gao YL, et al. Investigation on the nucleation mechanism of deformation-induced martensite in an austenitic stainless steel under severe plastic deformation. J Mater Res. 2007;22:724–729.
   Web of Science ®Google Scholar
• Yang X-S, Sun S, Zhang T-Y. The mechanism of bcc alpha ‘nucleation in single hcp epsilon laths in the fcc gamma -> hcp epsilon -> bcc alpha’ martensitic phase transformation. Acta Mater. 2015;95:264–273.
   Web of Science ®Google Scholar
• Ryu JH, Kim D-I, Kim HS, et al. Strain partitioning and mechanical stability of retained austenite. Scr Mater. 2010;63:297–299.
   Web of Science ®Google Scholar
• Fujita N, Ishikawa N, Roters F, et al. Experimental-numerical study on strain and stress partitioning in bainitic steels with martensite-austenite constituents. Int J Plast. 2018;104:39–53.
   Google Scholar
• Xu SS, Li JP, Cui Y, et al. Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel. Int J Plast. 2020;128:102677.
   Google Scholar
• Mara NA, Beyerlein IJ. Review: effect of bimetal interface structure on the mechanical behavior of Cu-Nb fcc-bcc nanolayered composites. J Mater Sci. 2014;49:6497–6516.
   Google Scholar
• Zhu Y, Wu X. Heterostructured materials. Prog Mater Sci. 2023;131:101019.
   Web of Science ®Google Scholar
• Wu X, Yang M, Yuan F, et al. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility. Proc Natl Acad Sci USA. 2015;112:14501–14505.
   PubMed Web of Science ®Google Scholar
• Ma XL, Huang CX, Xu WZ, et al. Strain hardening and ductility in a coarse-grain/nanostructure laminate material. Scr Mater. 2015;103:57–60.
   Web of Science ®Google Scholar
• Ma X, Huang C, Moering J, et al. Mechanical properties of copper/bronze laminates: role of interfaces. Acta Mater. 2016;116:43–52.
   Web of Science ®Google Scholar
• Huang CX, Wang YF, Ma XL, et al. Interface affected zone for optimal strength and ductility in heterogeneous laminate. Mater Today. 2018;21:713–719.
   Web of Science ®Google Scholar
• Wang Y, Yang M, Ma X, et al. Improved back stress and synergetic strain hardening in coarse-grain/nanostructure laminates. Mater Sci Eng Struct Mater Prop Microstruct Process. 2018;727:113–118.
   Google Scholar
• Zhu Y, Ameyama K, Anderson PM, et al. Heterostructured materials: superior properties from hetero-zone interaction. Mater Res Lett. 2021;9:1–31.
   Web of Science ®Google Scholar