References
- Bian MZ, Sasaki TT, Nakata T, et al. Effects of rolling conditions on the microstructure and mechanical properties in a Mg-Al-Ca-Mn-Zn alloy sheet. Mater Sci Eng: A. 2018;730:147–154.
- Hua ZM, Li MX, Wang C, et al. Pre-strain mediated fast natural aging in a dilute Mg-Zn-Ca-Sn-Mn alloy. Scr Mater. 2021;200:113924.
- Chen W, Wu W, Wang W, et al. Adjusting approaches of basal texture for improvement of tension-compression asymmetry in extruded magnesium alloys. Mater Res Lett. 2023;11(7):563–570.
- Huang XS, Bian MZ, Chino Y. Improvement of deep drawing formability of Mg-6Al-1Zn magnesium alloy sheets with high strength utilizing aging precipitation. Scr Mater. 2022;215:114709.
- Li YK, Zha M, Rong J, et al. Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling. J Mater Sci Technol. 2021;88:215–225.
- Nakata T, Li ZH, Sasaki TT, et al. Role of grain boundary segregation on microstructural development in basal-textured Mg-Al-Zn alloy sheet. Scr Mater. 2022;218:114828.
- Robson JD, Haigh SJ, Davis B, et al. Grain boundary segregation of rare-earth elements in magnesium alloys. Metall Mater Trans A. 2016;47(1):522–530.
- Zhao LY, Yan H, Chen RS, et al. The preferential growth and related textural evolution during static recrystallization in a cold-rolled Mg–Zn–Gd alloy. J Magnes Alloy. 2021;9(3):818–828.
- Guan DK, Rainforth WM, Gao JH, et al. Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 1- double twins. Acta Mater. 2017;135:14–24.
- Guan DK, Rainforth WM, Ma L, et al. Twin recrystallization mechanisms and exceptional contribution to texture evolution during annealing in a magnesium alloy. Acta Mater. 2017;126:132–144.
- Peng R, Xu C, Li Y, et al. Multiple-twinning induced recrystallization and texture optimization in a differential-temperature-rolled AZ31B magnesium alloy with excellent ductility. Mater Res Lett. 2022;10(5):318–326.
- Robson JD, Henry DT, Davis B. Particle effects on recrystallization in magnesium-manganese alloys: Particle-stimulated nucleation. Acta Mater. 2009;57(9):2739–2747.
- Robson JD, Henry DT, Davis B. Particle effects on recrystallization in magnesium-manganese alloys: Particle pinning. Mater Sci Eng: A. 2011;528(12):4239–4247.
- Yan H, Xu SW, Chen RS, et al. Twins, shear bands and recrystallization of a Mg-2.0%Zn-0.8%Gd alloy during rolling. Scr Mater. 2011;64(2):141–144.
- Zhao LY, Yan H, Chen RS, et al. Orientations of nuclei during static recrystallization in a cold-rolled Mg-Zn-Gd alloy. J Mater Sci Technol. 2021;60:162–167.
- Kim YM, Mendis C, Sasaki T, et al. Static recrystallization behaviour of cold rolled Mg-Zn-Y alloy and role of solute segregation in microstructure evolution. Scr Mater. 2017;136:41–45.
- Zeng X, Minárik P, Dobroň P, et al. Role of deformation mechanisms and grain growth in microstructure evolution during recrystallization of Mg-Nd based alloys. Scr Mater. 2019;166:53–57.
- Basu I, Al-Samman T. Triggering rare earth texture modification in magnesium alloys by addition of zinc and zirconium. Acta Mater. 2014;67:116–133.
- Choi SW, Won JW, Lee S, et al. Deformation twinning activity and twin structure development of pure titanium at cryogenic temperature. Mater Sci Eng: A. 2018;738:75–80.
- Guan D, Rainforth WM, Gao J, et al. Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 2- shear bands. Acta Mater. 2018;145:399–412.
- Bhattacharyya JJ, Agnew SR, Muralidharan G. Texture enhancement during grain growth of magnesium alloy AZ31B. Acta Mater. 2015;86:80–94.
- Mackenzie L, Pekguleryuz M. The recrystallization and texture of magnesium-zinc-cerium alloys. Scr Mater. 2008;59(6):665–668.
- Lee SW, Park SH. Static recrystallization mechanism in cold-rolled magnesium alloy with off-basal texture based on quasi in situ EBSD observations. J Alloy Compd. 2020;844:156185.
- Li X, Li X, Kure-Chu S-Z, et al. A comparative study on the static recrystallization behavior of cold-rolled Mg-3Al-1Zn alloy stimulated by electropulse treatment and conventional heat treatment. Metall Mater Trans A. 2018;49(2):613–627.
- Pei R, Zou Y, Wei D, et al. Grain boundary co-segregation in magnesium alloys with multiple substitutional elements. Acta Mater. 2021;208:116749.
- Zeng ZR, Zhu YM, Xu SW, et al. Texture evolution during static recrystallization of cold-rolled magnesium alloys. Acta Mater. 2016;105:479–494.
- Steiner MA, Bhattacharyya JJ, Agnew SR. The origin and enhancement of {0001} <11-20> texture during heat treatment of rolled AZ31B magnesium alloys. Acta Mater. 2015;95:443–455.
- Bian M, Nakatsugawa I, Matsuoka Y, et al. Improving the mechanical and corrosion properties of pure magnesium by parts-per-million-level alloying. Acta Mater. 2022;241:118393.
- Wang QH, Jiang B, Tang AT, et al. Unveiling annealing texture formation and static recrystallization kinetics of hot-rolled Mg-Al-Zn-Mn-Ca alloy. J Mater Sci Technol. 2020;43:104–118.
- Zeng ZR, Bian MZ, Xu SW, et al. Texture evolution during cold rolling of dilute Mg alloys. Scr Mater. 2015;108:6–10.
- Guan DK, Liu XG, Gao JH, et al. Exploring the mechanism of “Rare Earth” texture evolution in a lean Mg-Zn-Ca alloy. Sci Rep-Uk. 2019;9:1–11.
- Li LC, Suh BC, Suh JS, et al. Static recrystallization behavior of the cold-rolled Mg-1Al-1Zn-0.1Ca-0.2Y magnesium alloy sheet. J Alloy Compd. 2023;938:168508.
- Zhang Y, Jiang H, Kang Q, et al. Microstructure evolution and mechanical property of Mg-3Al alloys with addition of Ca and Gd during rolling and annealing process. J Magnes Alloy. 2020;8(3):769–779.
- Huang XD, Xin YC, Cao Y, et al. Understanding the mechanisms of texture evolution in an Mg-2Zn-1Ca alloy during cold rolling and annealing. Int J Plast. 2022;158:103412.
- Hua ZM, Zha M, Meng ZY, et al. Rapid dislocation-mediated solute repartitioning towards strain-aging hardening in a fine-grained dilute magnesium alloy. Mater Res Lett. 2022;10(1):21–28.
- Jin ZZ, Zha M, Wang SQ, et al. Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility. J Magnes Alloy. 2022;10(5):1191–1206.
- Barnett MR, Nave MD, Bettles CJ. Deformation micro-structures and textures of some cold rolled Mg alloys. Mater Sci Eng: A. 2004;386(1-2):205–211.
- Levinson A, Mishra RK, Doherty RD, et al. Influence of deformation twinning on static annealing of AZ31 Mg alloy. Acta Mater. 2013;61(16):5966–5978.
- Bian M, Huang X, Chino Y. Substantial improvement in cold formability of concentrated Mg–Al–Zn–Ca alloy sheets by high temperature final rolling. Acta Mater. 2021;220:117328.
- Stanford N, Barnett MR. The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility. Mat Sci Eng a-Struct. 2008;496(1-2):399–408.
- Abrivard G, Busso EP, Forest S, et al. Phase field modelling of grain boundary motion driven by curvature and stored energy gradients. Part II: Appl Recrystallisation Philos Mag. 2012;92(28-30):3643–3664.
- Dillon SJ, Rohrer GS. Mechanism for the development of anisotropic grain boundary character distributions during normal grain growth. Acta Mater. 2009;57(1):1–7.
- Pei R, Zou Y, Zubair M, et al. Synergistic effect of Y and Ca addition on the texture modification in AZ31B magnesium alloy. Acta Mater. 2022;233:117990.
- Gottstein G, Shvindlerman LS. Grain boundary migration in metals: thermodynamics, kinetics, applications, Second Edition. Boca Raton: Materials Science and Technology; 1999.