Synergistic improvement of strength and plasticity of Mg-6Li-3Al-1Sn alloy by microstructure regulation via rotary swaging

References

• Ji H, Wu GH, Liu WC, et al. Origin of the age-hardening and age-softening response in Mg-Li-Zn based alloys. Acta Mater. 2022;226:117673, doi:10.1016/j.actamat.2022.117673
   Web of Science ®Google Scholar
• Zha M, Wang SQ, Wang T, et al. Developing high-strength and ductile Mg-Gd-Y-Zn-Zr alloy sheet via bimodal grain structure coupling with heterogeneously-distributed precipitates. Mater Res Lett. 2023;11:772–780. doi:10.1080/21663831.2023.2235375
   Web of Science ®Google Scholar
• Wang T, Zha M, Du CF, et al. High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy. Mater Res Lett. 2023;11:187–195. doi:10.1080/21663831.2022.2133976
   Web of Science ®Google Scholar
• Gao YP, Zhao L, Zha M, et al. Twinning-induced plasticity with multiple twinning modes and disclinations in Mg alloys. Int. J. Plast. 2023;164:103595, doi:10.1016/j.ijplas.2023.103595
   Web of Science ®Google Scholar
• Peng X, Liang XL, Liu WC, et al. High-cycle fatigue behavior of Mg-8Li-3Al-2Zn-0.5Y alloy under different states. Magnes Alloy. 2021;9(5):1609–1618. doi:10.1016/j.jma.2020.07.012
   Web of Science ®Google Scholar
• Jeong HT, Kim WJ. Critical review of superplastic magnesium alloys with emphasis on tensile elongation behavior and deformation mechanisms. J Magnes Alloy. 2022;10(5):1133–1153. doi:10.1016/j.jma.2022.02.009
   Web of Science ®Google Scholar
• Peng P, Yan XT, Zheng WC, et al. Microstructure and mechanical properties of heat-treated Mg-6.2Li-3.5Al-3Y alloy. Mater Sci Eng: A. 2022;857:144039, doi:10.1016/j.msea.2022.144039
   Web of Science ®Google Scholar
• Li M, Xie DS, Li JR, et al. Realizing ultra-fine grains and ultra-high strength in conventionally extruded Mg-Ca-Al-Zn-Mn alloys: the multiple roles of nano-precipitations. Mater Charact. 2021;175:111049, doi:10.1016/j.matchar.2021.111049
   Web of Science ®Google Scholar
• Zhou G, Yang Y, Zhang HZ, et al. Microstructure and strengthening mechanism of hot-extruded ultralight Mg-Li-Al-Sn alloys with high strength. J Mater Sci Technol. 2022;103:186–196. doi:10.1016/j.jmst.2021.07.009
   Web of Science ®Google Scholar
• Liu XW, Bian LP, Tian F, et al. Microstructural evolution and mechanical response of duplex Mg-Li alloy containing particles during ECAP processing. Mater Charact. 2022;188:111910, doi:10.1016/j.matchar.2022.111910
   Web of Science ®Google Scholar
• Wan YC, Tang B, Gao YH, et al. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging. Acta Mater. 2020;200:274–286. doi:10.1016/j.actamat.2020.09.024
   Web of Science ®Google Scholar
• Mao QZ, Liu YF, Zhao YH. A review on mechanical properties and microstructure of ultrafine grained metals and alloys processed by rotary swaging. J Alloy Compd. 2022;896:163122, doi:10.1016/j.jallcom.2021.163122
   Web of Science ®Google Scholar
• Chen X, Liu CM, Jiang SN, et al. Fabrication of nanocrystalline high-strength magnesium−lithium alloy by rotary swaging. Adv Eng Mater. 2022;24:2100666, doi:10.1002/adem.202100666
   Web of Science ®Google Scholar
• Yang Y, Chen X, Nie JF, et al. Achieving ultra-strong magnesium-lithium alloys by low-strain rotary swaging. Mater Res Lett. 2021;9:255–262. doi:10.1080/21663831.2021.1891150
   Web of Science ®Google Scholar
• Estrin Y, Martynenko N, Lukyanova E, et al. Effect of rotary swaging on microstructure, texture, and mechanical properties of a Mg-Al-Zn alloy. Adv Eng Mater. 2020;22(1):1900506, doi:10.1002/adem.201900506
   Web of Science ®Google Scholar
• Martynenko N, Lukyanova E, Anisimova N, et al. Improving the property profile of a bioresorbable Mg-Y-Nd-Zr alloy by deformation treatments. Materialia. 2020;13:100841, doi:10.1016/j.mtla.2020.100841
   Google Scholar
• Huang ZY, Liu CM, Jiang SN, et al. Achieving high-strength nanocrystalline WE43 Mg alloy by a combination of cold rotary swaging and aging treatment. Vaccum. 2022;197:110840, doi:10.1016/j.vacuum.2021.110840
   Web of Science ®Google Scholar
• Zhao J, Jiang BC, Dai ZC, et al. Microstructure, texture, and tensile properties of Mg-3Li alloy extruded at different temperatures. J Mater Eng Perform. 2022;31(7):5782–5789. doi:10.1007/s11665-022-06625-7
   Web of Science ®Google Scholar
• Zou Y, Zhang LH, Li Y, et al. Improvement of mechanical behaviors of a superlight Mg-Li base alloy by duplex phases and fine precipitates. J Alloy Compd. 2018;735:2625–2633. doi:10.1016/j.jallcom.2017.12.025
   Web of Science ®Google Scholar
• Zhang X, Su KQ, Kang HJ, et al. Improving the mechanical properties of duplex Mg-Li-Zn alloy by mixed rolling processing. Mater Today Commun. 2022;31:103538, doi:10.1016/j.mtcomm.2022.103538
   Google Scholar
• Sun JW, Ding DH, Liu WC, et al. Strength and elastic modulus enhancement in Mg-Li-Al matrix composites reinforced by ex situ TiB2 particles via stir casting. J Magnes Alloy. 2022; In Press, doi:10.1016/j.jma.2022.09.020
   Google Scholar
• Bian LP, Liu XW, Wang T, et al. Influence of various initial microstructures on microstructure and mechanical property of ECAP processed Mg-8.4Li-3.58Al-0.36Si-0.05Ti-0.01B alloys. Mater Sci Eng: A. 2023;872:144022, doi:10.1016/j.msea.2022.144022
   Web of Science ®Google Scholar
• Guo YH, He XC, Dai YB, et al. Characterization of hot extrusion deformation behavior, texture evolution, and mechanical properties of Mg-5Li-3Sn-2Al-1Zn magnesium alloy. Mater Sci Eng: A. 2022;858:144136, doi:10.1016/j.msea.2022.144136
   Web of Science ®Google Scholar
• Liao G, Wu G, Liu W, et al. Microstructure evolution and enhanced fatigue behavior in the Mg-10Li-5Zn-0.5Er alloys micro-alloyed with Yb. J Magnes Alloy. 2022. doi:10.1016/j.jma.2022.07.017
   Google Scholar
• Wang JH, Jin Y, Wu RZ, et al. Simultaneous improvement of strength and damping capacities of Mg-8Li-6Y-2Zn alloy by heat treatment and hot rolling. J Alloy Compd. 2022;927:167027, doi:10.1016/j.jallcom.2022.167027
   Web of Science ®Google Scholar
• Song WJ, Liu J, He S, et al. Microstructure and mechanical properties of as-cast ultralight and high strength Mg-10Li-3Al-3Zn-xY alloy with multi-precipitates. Mater Charact. 2022;189:111972, doi:10.1016/j.matchar.2022.111972
   Web of Science ®Google Scholar
• Zhou G, Yang Y, Sun L, et al. Tailoring the microstructure, mechanical properties and damping capacities of Mg-4Li-3Al-0.3Mn alloy via hot extrusion. J Mater Res Technol. 2022;19:4197–4208. doi:10.1016/j.jmrt.2022.06.100
   Google Scholar
• Ji Q, Wang Y, Wu RZ, et al. High specific strength Mg-Li-Zn-Er alloy processed by multi deformation processes. Charact Mater. 2020;160:110135, doi:10.1016/j.matchar.2020.110135
   Web of Science ®Google Scholar
• Jiang B, Zeng Y, Zhang MX, et al. Effects of Sn on microstructure of as-cast and as-extruded Mg-9Li alloys. Nonferrous Met Soc China. 2013;23(4):904–908. doi:10.1016/S1003-6326(13)62546-7
   Web of Science ®Google Scholar
• Li CQ, He YB, Huang HP. Effect of lithium content on the mechanical and corrosion behaviors of HCP binary Mg-Li alloys. J Magnes Alloy. 2021;9(2):569–580. doi:10.1016/j.jma.2020.02.022
   Web of Science ®Google Scholar
• Brennan S, Bermudez K, Kulkarni N, et al. Interdiffusion in the Mg-Al system and intrinsic diffusionin β-Mg2Al3. Metall Mater Sci A. 2012;43(11):4043–4052. doi:10.1007/s11661-012-1248-8
   Google Scholar
• Sasaki TT, Lin JY, Yi P, et al. Deformation induced solute segregation and G.P. zone formation in Mg-Al and Mg-Zn binary alloys. Scr Mater. 2022;220:114924, doi:10.1016/j.scriptamat.2022.114924
   Web of Science ®Google Scholar
• Peng JH, Zhang Z, Huang JA, et al. The effect of grain size on texture evolution and mechanical properties of an AZ31 magnesium alloy during cold-rolling process. J Alloy Compd. 2020;817:153302, doi:10.1016/j.jallcom.2019.153302
   Web of Science ®Google Scholar
• Lv BJ, Wang S, Gao FH, et al. {101¯ 2} twin-twin intersection-induced lattice rotation and dynamic recrystallization in Mg-6Al-3Sn-2Zn alloy. J Magnes Alloy. 2022; In Press, doi:10.1016/j.jma.2022.08.006
   Google Scholar
• Dillon SJ, Tang M, Carter W, et al. Complexion: A new concept for kinetic engineering in materials science. Acta Mater. 2007;55(18):6208–6218. doi:10.1016/j.actamat.2007.07.029
   Web of Science ®Google Scholar
• Xiao LR, Chen XF, Cao Y, et al. Solute segregation assisted nanocrystallization of a cold-rolled Mg-Ag alloy during annealing. Scr Mater. 2020;177:69–73. doi:10.1016/j.scriptamat.2019.10.012
   Web of Science ®Google Scholar
• Yu ZJ, Huang YD, Liu LL, et al. New strategy to solve the ambient strength-ductility dilemma in precipitation-strengthened Mg-Gd alloys via Li addition. Scr Mater. 2022;220:114901, doi:10.1016/j.scriptamat.2022.114901
   Web of Science ®Google Scholar
• Mouhib F, Pei R, Erol B, et al. Synergistic effects of solutes on active deformation modes, grain boundary segregation and texture evolution in Mg-Gd-Zn alloys. Mater Sci Eng: A. 2022;847:143348, doi:10.1016/j.msea.2022.143348
   Web of Science ®Google Scholar
• Cao Y, Ni S, Liao XZ, et al. Structural evolutions of metallic materials processed by severe plastic deformation. Mater Sci Eng: R Rep. 2018;133:1–59. doi:10.1016/j.mser.2018.06.001
   Web of Science ®Google Scholar
• Minarik P, Cizek J, Vesely J, et al. Nanocrystalline aluminium particles inside Mg-4Li-4Al-2RE magnesium alloy after severe plastic deformation. Mater Charact. 2017;127:248–252. doi:10.1016/j.matchar.2016.12.021
   Web of Science ®Google Scholar
• Li RG, Yan Y, Pan HC, et al. Achieving a high-strength binary Mg–15Gd alloy by nano substructure with Gd segregation and nano clusters. Mater Res Lett. 2022;10:682–689. doi:10.1080/21663831.2022.2086834
   Web of Science ®Google Scholar
• Chen X, Liu C, Jiang SN, et al. Effect of yttrium on nanocrystallization of magnesium alloys during cold rotary swaging. Mater Charact. 2022;184:111696, doi:10.1016/j.matchar.2021.111696
   Web of Science ®Google Scholar