References
- Niu Y, Jiao F, Zhao B, et al. Investigation of Cutting Force in Longitudinal-Torsional Ultrasonic-Assisted Milling of Ti-6Al-4V. Mater. 2019;12(12):1955.
- Storchak M, Rupp P, Möhring HC, et al. Determination of Johnson–Cook Constitutive Parameters for Cutting Simulations. Metal. 2019;9(4):473.
- Mamedov A, Ozturk H, Makas T. Investigation of Mechanical and Microstructural Properties of Ti-6Al-4V Alloy Depending on Hot Forging Process Parameters. Proc Eng. 2017;207:2155–2160.
- Kukuryk M. The Analysis of Deformation and Forecasting Microstructure in the Forging Process of the X6CrNiTi18-10 Austenitic Stee. Arch Metall Mater. 2018;63:393–401.
- Bruschi S, Buffa G, Ducato A, et al. Phase Evolution in Hot Forging of Dual Phase Titanium Alloys: experiments and Numerical Analysis. J Manuf Process. 2015;20:382–388.
- Souza PM, Mendiguren J, Chao Q, et al. “A Microstructural Based Constitutive Approach for Simulating Hot Deformation of Ti6Al4V Alloy in the α+ β Phase Region. Mater Scie Eng: A. 2019;748:30–37.
- Bahador A, Hamzah E, Kondoh K, et al. Microstructure and Superelastic Properties of Free Forged Ti–Ni Shape-memory Alloy. T Nonferrous Metal Soc. 2018;28(3):502–514.
- Zhang J, Xie H, Lu Z, et al. Microstructure Evolution and Mechanical Properties of AZ80 Magnesium Alloy during High-pass Multi-directional Forging. Results Phys. 2018;10:967–972.
- Blaha F, Langenecker B. Investigations for Processing Recovery (Deformation Softening) of Metal Crystals. J Phys Metal. 1958;49(7):357–360.
- Vahdati M, Mahdavinejad R, Amini S. Investigation of the Ultrasonic Vibration Effect in Incremental Sheet Metal Forming Process. Proc Inst Mech Eng, Part B. 2017;231(6):971–982.
- Hung JC, Tsai YC. “Investigation of the Effects of Ultrasonic Vibration-assisted Micro-upsetting on Brass. Mater Sci Eng A. 2013;580:125–132.
- Fartashvand V, Abdullah A, Vanini SAS. Investigation of Ti-6Al-4V Alloy Acoustic Softening,”. Ultrason sonochem. 2017;38:744–749.
- Fan Z, Feng H. Study on Selective Laser Melting and Heat Treatment of Ti-6Al-4V Alloy. Results Phys. 2018;10:660–664.
- Shi Z, Guo H, Liu R, et al. Microstructure and Mechanical Properties of TC21 Titanium Alloy by Near-isothermal Forging. T Nonferrous Metal Soc. 2015;25(1):72–79.
- Hu J, Shimizu T, Yoshino T, et al. Ultrasonic Dynamic Impact Effect on Deformation of Aluminum during Micro-compression Tests. J Mater Process Technol. 2018;258:144–154.
- Daud Y, Lucas M, Huang Z. Modelling the Effects of Superimposed Ultrasonic Vibrations on Tension and Compression Tests of Aluminium. J Mater Process Technol. 2007;186(1–3):179–190.
- Bai Y, Yang M. The Influence of Superimposed Ultrasonic Vibration on Surface Asperities Deformation. J Mater Process Technol. 2016;229:367–374.
- Zhou H, Cui H, Qin QH. Influence of Ultrasonic Vibration on the Plasticity of Metals during Compression Process. J Mater Process Technol. 2018;251:146–159.
- Li M, Li H, Luo J. Titanium Alloy Precision Forging. China: Science Press. 2016.