References
- Andrade Pires FM, de Souza Neto EA, de la Cuesta Padilla JL. 2004. An assessment of the average nodal volume formulation for the analysis of nearly incompressible solids under finite strains. Commun Numer Methods Eng. 20:569–583. Available from: http://onlinelibrary.wiley.com/doi/10.1002/cnm.697/abstract.
- Bathe KJ. 1982. Finite element procedures in Engineering Analysis. New Jersey, NJ: Prentice Hall.
- Blacker TD, Meyers RJ. 1993. Seams and wedges in plastering: a 3-D hexahedral mesh generation algorithm. Eng Comput. 9:83–93. Available from: http://link.springer.com/article/10.1007/BF01199047.
- Bonet J, Burton AJ. 1998. A simple average nodal pressure tetrahedral element for incompressible and nearly incompressible dynamic explicit applications. Commun Numer Methods Eng. 14:437–449. doi:10.1002/(SICI)1099-0887(199805)14:5<437:AID-CNM162>3.0.CO;2-W>.
- Bourdin X, Trosseille X, Petit P, Beillas P. 2007. Comparison of tetrahedral and hexahedral meshes for organ finite element modeling: an application to kidney impact. Presented at the 20th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Lyon, France p. 1–10.
- Buchaillard S, Brix M, Perrier P, Payan Y. 2007. Simulations of the consequences of tongue surgery on tongue mobility: implications for speech production in post-surgery conditions. Int J Med Rob Comput Assist Surg. 3:252–261.
- Buchaillard S, Perrier P, Payan Y. 2009. A biomechanical model of cardinal vowel production: muscle activations and the impact of gravity on tongue positioning. J Acoust Soc Am. 126:2033–2051.
- Cifuentes A, Kalbag A. 1992. A performance study of tetrahedral and hexahedral elements in 3-d finite element structural analysis. Finite Elem Anal Des. 12:313–318. Available from: http://www.sciencedirect.com/science/article/pii/0168874X9290040J.
- Conti P, Hitschfeld-Kahler N, Fichtner W. 1991. Omega-an octree-based mixed element grid allocator for the simulation of complex 3-d device structures. IEEE Trans CAD Integr Circuits Syst. 10:1231–1241.
- Dang J, Honda K. 2004. Construction and control of a physiological articulatory model. J Acoust Soc Am. 115:853–870.
- Dohrmann C, Heinstein MW, Jung J, Key SW, Witkowski WR. 2000. Node-based uniform strain elements for three-node triangular and four-node tetrahedral meshes. Int J Numer Methods Eng. 47:1549–1568. doi:10.1002/(SICI)1097-0207(20000330)47:9<1549:AID-NME842>3.0.CO;2-K.
- Fernandes J, Martins P. 2007. All-hexahedral remeshing for the finite element analysis of metal forming processes. Finite Elem Anal Des. 43:666–679. Available from: http://www.sciencedirect.com/science/article/pii/S0168874X07000248.
- Fujita S, Dang J, Suzuki N, Honda K. 2007. A computational tongue model and its clinical application. Oral Sci Int. 4:97–109. Available from: http://www.sciencedirect.com/science/article/pii/S1348864307800048.
- Gérard JM, Wilhelms-Tricarico R, Perrier P, Payan Y. 2003. A 3D dynamical biomechanical tongue model to study speech motor control. Res Dev Biomech. 1:49–64. Available from: http://hal.archives-ouvertes.fr/hal-00080422.
- González E, Lobos C. 2014. A set of mixed-element transition patterns for adaptive 3d meshing. Departamento de Informática, UTFSM. Report No.: 2014/01. Available from: http://www.inf.utfsm.cl/clobos/tech.html.
- Hannaby S. 1988. A mapping method for mesh generation. Comput Math Appl. 16:727–735. Available from: http://www.sciencedirect.com/science/article/pii/0898122188900089.
- Huang J, Jiang T, Shi Z, Tong Y, Bao H, Desbrun M. 2014. L1 based construction of polycube maps from complex shapes. ACM Trans Graph. 33:25:1–25:11. doi:10.1145/2602141.
- Joldes GR, Wittek A, Miller K. 2009. Non-locking tetrahedral finite element for surgical simulation. Commun Numer Methods Eng. 25: 827–836. doi: 10.1002/cnm.1185.
- Khawaja A, Kallinderis Y. 2000. Hybrid grid generation for turbomachinery and aerospace applications. Int J Numer Methods Eng. 49:145–166. doi:10.1002/1097-0207(20000910/20)49:1/2<145::AID-NME927>3.0.CO;2-W/abstract.
- Kieser J, Farland M, Jack H, Farella M, Wang Y, Rohrle O. 2014. The role of oral soft tissues in swallowing function: what can tongue pressure tell us? Aust Dent J. 59:155–161. doi:10.1111/adj.12103/abstract.
- Klingbeil W, Shield R. 1966. Large-deformation analyses of bonded elastic mounts. Z Angew Math Phys ZAMP. 17: 281–305. doi:10.1007/BF01601394.
- Kowalski N, Ledoux F, Frey P. 2015. Smoothness driven frame field generation for hexahedral meshing. Comput Aided Des. Available from: http://www.sciencedirect.com/science/article/pii/S0010448515000895.
- Lhner R, Parikh P. 1988. Generation of three-dimensional unstructured grids by the advancing-front method. Int J Numer Methods Fluids 8:1135–1149. Available from: http://onlinelibrary.wiley.com/doi/10.1002/fld.1650081003/abstract.
- Li Y, Liu Y, Xu W, Wang W, Guo B. 2012. All-hex meshing using singularity-restricted field. ACM Trans Graph. 31:177:1–177:11. Available from: http://doi.acm.org/10.1145/2366145.2366196.
- Lin H, Liao H, Deng C. 2012. Filling triangular mesh model with all-hex mesh by volume subdivision fitting. State Key Lab. of CAD & CG, Zhejiang University. Report No.: TR ZJUCAD 2012 002. Available from: http://www.cad.zju.edu.cn/home/hwlin/publications.html.
- Livesu M, Vining N, Sheffer A, Gregson J, Scateni R. 2013. Polycut: monotone graph-cuts for polycube base-complex construction. ACM Trans. Graph. 32: 1–12.doi:10.1145/2508363.2508388.
- Lobos C. 2013. A set of mixed-elements patterns for domain boundary approximation in hexahedral meshes. Stud Health Technol Inf. 184: 268–272. Proceedings of MMVR20. doi:10.1002/cnm.2725.
- Lobos C, González E. 2015. Mixed-element Octree: a meshing technique toward fast and real-time simulations in biomedical applications. Int J Numer Methods Biomed Eng.
- Martin T, Cohen E, Kirby RM. 2012. Mixed-element volume completion from nurbs surfaces. Comput Graph. 36:548–554. Shape Modeling International (SMI) Conference 2012. Available from: http://www.sciencedirect.com/science/article/pii/S0097849312000477.
- Miller K. 2005. Method of testing very soft biological tissues in compression. J Biomech. 38:153–158.
- Morriss L, Wittek A, Miller K. 2008. Compression testing of very soft biological tissues using semi-confined configuration -- a word of caution. J Biomech. 41:235–238.
- Nazari MA, Perrier P, Chabanas M, Payan Y. 2011. Shaping by stiffening: a modeling study for lips. Motor Control 15:141–168.
- Nazari MA, Perrier P, Payan Y. 2013. The distributed lambda (λ) model (DLM): a 3-d, finite-element muscle model based on feldman’s λ model; assessment of orofacial gestures. J Speech Lang Hear Res. 56:S1909–S1923.
- Nicolas G, Fouquet T. 2013. Adaptive mesh refinement for conformal hexahedral meshes. Finite Elem Anal Des. 67:1–12.
- Onishi Y, Amaya K. 2014. A locking-free selective smoothed finite element method using tetrahedral and triangular elements with adaptive mesh rezoning for large deformation problems. Int J Numer Methods Eng. 99:354–371. Available from: http://onlinelibrary.wiley.com/doi/10.1002/nme.4684/abstract.
- Owen SJ, Saigal S. 2001. Formation of pyramid elements for hexahedra to tetrahedra transitions. Comput Methods Appl Mech Eng. 190:4505–4518. Available from: http://www.sciencedirect.com/science/article/pii/S0045782500003303.
- Payen DJ, Bathe KJ. 2011. Improved stresses for the 4-node tetrahedral element. Comput Struct. 89:1265–1273. Available from: http://www.sciencedirect.com/science/article/pii/S0045794911000423.
- Pellerin J, Lvy B, Caumon G. 2014. Toward mixed-element meshing based on restricted voronoi diagrams. Procedia Eng. 82:279–290. 23rd International Meshing Roundtable (IMR23). Available from: http://www.sciencedirect.com/science/article/pii/S1877705814016695.
- Pelteret JPV, Reddy BD. 2014. Development of a computational biomechanical model of the human upper-airway soft-tissues toward simulating obstructive sleep apnea. Clin Anat. 27:182–200. Available from: http://onlinelibrary.wiley.com/doi/10.1002/ca.22313/abstract.
- Polgar K, Viceconti M, Connor JJ. 2001. A comparison between automatically generated linear and parabolic tetrahedra when used to mesh a human femur. Proc Inst Mech Eng Part H: J Eng Med. 215:85–94. Available from: http://pih.sagepub.com/content/215/1/85.abstract.
- Ponthot JP. 1995. A finite element unified treatment of continuum mechanics for solids submitted to large strains. PhD Thesis. Belgium: Université de Liège.
- Price MA, Armstrong CG. 1997. Hexahedral mesh generation by medial surface subdivision: part Ii solids with flat and concave edges. Int J Numer Methods Eng. 40:111–136. doi:10.1002/(SICI)1097-0207(19970115)40:1<111::AID-NME56=3.0.CO;2-K/abstract.
- Ramos A, Simes J. 2006. Tetrahedral versus hexahedral finite elements in numerical modelling of the proximal femur. Med Eng Phys. 28:916–924. Available from: http://www.sciencedirect.com/science/article/pii/S1350453305002675.
- Santis GD, Beule MD, Canneyt KV, Segers P, Verdonck P, Verhegghe B. 2011. Full-hexahedral structured meshing for image-based computational vascular modeling. Med Eng Phys. 33:1318–1325. Available from: http://www.sciencedirect.com/science/article/pii/S1350453311001445.
- Schneiders R. 1996. A grid-based algorithm for the generation of hexahedral element meshes. Eng Comput. 12:168–177. Available from: http://link.springer.com/article/10.1007/BF01198732.
- Schonning A, Oommen B, Ionescu I, Conway T. 2009. Hexahedral mesh development of free-formed geometry: the human femur exemplified. Comput Aided Des. 41:566–572. Medical Modeling Special Issue: An Introduction. Available from: http://www.sciencedirect.com/science/article/pii/S0010448507002230.
- Shephard MS, Georges MK. 1991. Automatic three-dimensional mesh generation by the finite octree technique. Int J Numer Methods Eng. 32:709–749. doi:10.1002/nme.1620320406/abstract.
- Si H. 2015. Tetgen, a delaunay-based quality tetrahedral mesh generator. ACM Trans Math Softw. 41: 11:1–11:36. doi:10.1145/2629697.
- Tadepalli SC, Erdemir A, Cavanagh PR. 2011. Comparison of hexahedral and tetrahedral elements in finite element analysis of the foot and footwear. J Biomech. 44:2337–2343. Available from: http://www.sciencedirect.com/science/article/pii/S0021929011003952.
- Takemoto H. 2001. Morphological analyses of the human tongue musculature for three-dimensional modeling. J Speech Lang Hear Res. 44:95. Available from: http://jslhr.pubs.asha.org/article.aspx?doi=10.1044/1092-4388(2001/009).
- Tarini M, Hormann K, Cignoni P, Montani C. 2004. Polycube-maps. ACM Trans Graph. 23:853–860. doi:10.1145/1015706.1015810.
- Tautges TJ, Blacker T, Mitchell SA. 1996. The Whisker Weaving Algorithm: a connectivity-based method for constructing all-hexahedral finite element meshes. Int J Numer Methods Eng. 39:3327–3349. doi:10.1002/(SICI)1097-0207(19961015)39:19<3327::AID-NME2>3.0.CO;2-H/abstract.
- Thacker WC. 1980. A brief review of techniques for generating irregular computational grids. Int J Numer Methods Eng. 15:1335–1341. doi:10.1002/nme.1620150906/abstract.
- Viceconti M, Taddei F. 2003. Automatic generation of finite element meshes from computed tomography data. Crit Rev Biomed Eng. 31:27–72.
- Weatherill NP, Hassan O. 1994. Efficient three-dimensional Delaunay triangulation with automatic point creation and imposed boundary constraints. Int J Numer Methods Eng. 37:2005–2039.doi:10.1002/nme.1620371203/abstract.
- Wilhelms-Tricarico R. 1995. Physiological modeling of speech production: methods for modeling soft-tissue articulators. J Acoust Soc Am. 97:3085–3098.
- Wu H, Gao S. 2014. Automatic swept volume decomposition based on sweep directions extraction for hexahedral meshing. Procedia Eng. 82:136–148. 23rd International Meshing Roundtable (IMR23). Available from: http://www.sciencedirect.com/science/article/pii/S1877705814016580.
- Zhang Y, Bajaj C. 2006. Adaptive and quality quadrilateral/hexahedral meshing from volumetric data. Comput Methods Appl Mech Eng. 195:942–960. Available from: http://www.sciencedirect.com/science/article/pii/S0045782505001374.
- Zhao M, Barber T, Cistulli PA, Sutherland K, Rosengarten G. 2013. Simulation of upper airway occlusion without and with mandibular advancement in obstructive sleep apnea using fluid-structure interaction. J Biomech. 46:2586–2592. Available from: http://www.jbiomech.com/article/S0021929013003904/abstract.
- Zienkiewicz OC, Rojek J, Taylor RL, Pastor M. 1998. Triangles and tetrahedra in explicit dynamic codes for solids. Int J Numer Methods Eng. 43:565–583. doi:10.1002/(SICI)1097-0207(19981015)43:3<565:AID-NME454>3.0.CO;2-9.