Heterocoagulation and SPS sintering of sulfonitric-treated CNT and 8YZ nanopowders

References

• Curtin WA, Sheldon BW. CNT-reinforced ceramics and metals. Mater Today. 2004;7:44–49.
   Web of Science ®Google Scholar
• Duszová A, Dusza J, Tomášek K, et al. Zirconia/carbon nanofiber composite. Scr Mater. 2008;58:520–523.
   Web of Science ®Google Scholar
• Mohapatra P, Rawat S, Mahato N, et al. Restriction of phase transformation in carbon nanotube-reinforced yttria-stabilized zirconia. Metall Mater Trans A. 2015;46:2965–2974.
   Google Scholar
• Peigney A, Laurent C, Rousset A. Synthesis and characterization of alumina matrix nanocomposites containing carbon nanotubes. Key Eng Mater. 1997;132–136:743–746.
   Google Scholar
• Rishabh A, Joshi MR, Balani K. Fractal model for estimating fracture toughness of carbon nanotube reinforced aluminum oxide. J Appl Phys. 2010;107:123532.
   Web of Science ®Google Scholar
• Treacy MMJ, Ebbesen TW, Gibson JM. Exceptionally high Young’s modulus observed for individual carbon nanotubes. Nature. 1996;381:678–680.
   Web of Science ®Google Scholar
• Xia Z, Riester L, Curtin WA, et al. Direct observation of toughening mechanisms in carbon nanotube ceramic matrix composites. Acta Materialia. 2004;52:931–944.
   Web of Science ®Google Scholar
• Zhu Y-F, Shi L, Liang J, et al. Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics. Compos Part B Eng. 2008;39:1136–1141.
   Web of Science ®Google Scholar
• Cho J, Boccaccini AR, Shaffer MSP. Ceramic matrix composites containing carbon nanotubes. J Mater Sci. 2009;44:1934–1951.
   Web of Science ®Google Scholar
• Estili M, Kawasaki A, Sakamoto H, et al. The homogeneous dispersion of surfactantless, slightly disordered, crystalline, multiwalled carbon nanotubes in α-alumina ceramics for structural reinforcement. Acta Materialia. 2008;56:4070–4079.
   Web of Science ®Google Scholar
• Estili M, Sakka Y, Kawasaki A. Unprecedented simultaneous enhancement in strain tolerance, toughness and strength of Al2O3 ceramic by multiwall-type failure of a high loading of carbon nanotubes. Nanotechnology. 2013;24: 155702. (9pp).
   Web of Science ®Google Scholar
• Melk L, Roa Rovira JJ, García-Marro F, et al. Nanoindentation and fracture toughness of nanostructured zirconia/multi-walled carbon nanotube composites. Ceram Int. 2015;41:2453–2461.
   Web of Science ®Google Scholar
• Zapata-Solvas E, Gómez-García D, Domínguez-Rodríguez A. Towards physical properties tailoring of carbon nanotubes-reinforced ceramic matrix composites. J Eur Ceram Soc. 2012;32:3001–3020.
   Web of Science ®Google Scholar
• Matsuoka M, Tatami J, Wakihara T, et al. Improvement of strength of carbon nanotube-dispersed Si3N4 ceramics by bead milling and adding lower-temperature sintering aids. J Asian Ceram Soc. 2014;2:199–203.
   Google Scholar
• Kasperski A, Weibel A, Estournès C, et al. Preparation-microstructure-property relationships in double-walled carbon nanotubes/alumina composites. Carbon. 2013;53:62–72.
   Web of Science ®Google Scholar
• Suárez G, Jang B-K, Aglietti EF, et al. Fabrication of dense ZrO2/CNT composites: influence of bead-milling treatment. Metall Mat Trans A. 2013;44:4374–4381.
   Google Scholar
• Estili M, Kawasaki A. An approach to mass-producing individually alumina-decorated multi-walled carbon nanotubes with optimized and controlled compositions. Scr Mater. 2008;58:906–909.
   Web of Science ®Google Scholar
• Kumar PS, Smart DSR, Alexis SJ. Corrosion behaviour of aluminium metal matrix reinforced with multi-wall carbon nanotube. J Asian Ceram Soc. 2017;5:71–75.
   Web of Science ®Google Scholar
• Ghahfarokhi SS, Mamoory RS, Kalashami AG. Inverse precipitation synthesis of ZrO2 nanopowder and in-situ coating on MWCNTs. Ceram Int. 2018;44:13556–13564.
   Web of Science ®Google Scholar
• Estili M, Sakka Y. Recent advances in understanding the reinforcing ability and mechanism of carbon nanotubes in ceramic matrix composites. Sci Technol Adv Mater. 2014;15:064902.
   PubMed Web of Science ®Google Scholar
• Inam F. Development of Ceramic – Carbon Nanotube (CNT) nanocomposites. London (UK): School of Engineering and Materials Science Queen Mary, University of London; 2009.
   Google Scholar
• Zhou W, Sasaki S, Kawasaki A. Effective control of nanodefects in multiwalled carbon nanotubes by acid treatment. Carbon. 2014;78:121–129.
   Web of Science ®Google Scholar
• Zhang J, Zou H, Qing Q, et al. Effect of chemical oxidation on the structure of single-walled carbon nanotubes. J Phys Chem B. 2003;107:3712–3718.
   Web of Science ®Google Scholar
• Gómez S, Rendtorff NM, Aglietti EF, et al. Intensity of sulfonitric treatment on multiwall carbon nanotubes. Chem Phys Lett. 2017;689:135–141.
   Web of Science ®Google Scholar
• Gómez S, Rendtorff NM, Aglietti EF, et al. Surface modification of multiwall carbon nanotubes by sulfonitric treatment. Appl Surf Sci. 2016;379:264–269.
   Web of Science ®Google Scholar
• Tiwari D, Basu B, Biswas K. Simulation of thermal and electric field evolution during spark plasma sintering. Ceram Int. 2009;35:699–708.
   Web of Science ®Google Scholar
• Grasso S, Sakka Y, Maizza G. Electric current activated/assisted sintering (ECAS): A review of patents 1906-2008. Sci Technol Adv Mater. 2009;10:053001.
   Web of Science ®Google Scholar
• Bruni YL, Compositos del sistema ZrO2-CaO-Al2O3 obtenidos por reacción-sinterización de zirconia y cemento de alta alúmina [Tesis], Facultad de Ciencias Exactas; 2014.
   Google Scholar
• Mahato N, Nisar A, Mohapatra P, et al. Effect of far-field stresses and residual stresses incorporation in predicting fracture toughness of carbon nanotube reinforced yttria stabilized zirconia. J Appl Phys. 2017;122:145104.
   Web of Science ®Google Scholar
• Lamnini S, Fogarassy Z, Horváth ZE, et al., The role of the attrition milling on the grain size and distribution of the carbon nanotubes in YSZ powders. Boletín de la Sociedad Española de Cerámica y Vidrio; 2018.
   Google Scholar
• Gómez S, Suarez G, Rendtorff N, et al. Relation between mechanical and textural properties of dense materials of tetragonal and cubic zirconia. Sci Sintering. 2016;48:119–130.
   Web of Science ®Google Scholar
• Lamnini S, Károly Z, Bódis E, et al. Influence of structure on the hardness and the toughening mechanism of the sintered 8YSZ/MWCNTs composites. Ceram Int. 2019;45:5058–5065.
   Web of Science ®Google Scholar
• Rendtorff NM, Grasso S, Hu C, et al. Dense zircon (ZrSiO 4) ceramics by high energy ball milling and spark plasma sintering. Ceram Int. 2012;38:1793–1799.
   Web of Science ®Google Scholar
• Rendtorff NM, Grasso S, Hu C, et al. Zircon-zirconia (ZrSiO 4-ZrO 2) dense ceramic composites by spark plasma sintering. J Eur Ceram Soc. 2012;32:787–793.
   Web of Science ®Google Scholar
• Moreira Toja RJ, Rendtorff NM, Aglietti EF, et al. Influence of the porosity caused by incomplete sintering on the mechanical behaviour of lanthanum silicate oxyapatite. Ceram Int. 2018;44:14348–14354.
   Web of Science ®Google Scholar
• Lankford J. Indentation microfracture in the Palmqvist crack regime: implications for fracture toughness evaluation by the indentation method. J Mater Sci Lett. 1982;1:493–495.
   Google Scholar
• Živcová Z, Černý M, Pabst W, et al. Elastic properties of porous oxide ceramics prepared using starch as a pore-forming agent. J Eur Ceram Soc. 2009;29:2765–2771.
   Web of Science ®Google Scholar
• Cho S, Kikuchi K, Miyazaki T, et al. Epitaxial growth of chromium carbide nanostructures on multiwalled carbon nanotubes (MWCNTs) in MWCNT–copper composites. Acta Materialia . 2013;61:708–716.
   Web of Science ®Google Scholar
• Curtin W. Stress-strain response of brittle matrix composites. In: Book: Comprehensive Composite Materials. 2000. p.47–76.
   Google Scholar
• Bocanegra-Bernal MH, Dominguez-Rios C, Echeberria J, et al. Spark plasma sintering of multi-, single/double- and single-walled carbon nanotube-reinforced alumina composites: is it justifiable the effort to reinforce them? Ceram Int. 2016;42:2054–2062.
   Google Scholar
• Yamamoto G, Shirasu K, Hashida T, et al. Nanotube fracture during the failure of carbon nanotube/alumina composites. Carbon. 2011;49:3709–3716.
   Web of Science ®Google Scholar
• Duszová A, Dusza J, Tomášek K, et al. Microstructure and properties of carbon nanotube/zirconia composite. J Eur Ceram Soc. 2008;28:1023–1027.
   Web of Science ®Google Scholar
• Mazaheri M, Mari D, Schaller R, et al. Processing of yttria stabilized zirconia reinforced with multi-walled carbon nanotubes with attractive mechanical properties. J Eur Ceram Soc. 2011;31:2691–2698.
   Web of Science ®Google Scholar
• Dusza J, Blugan G, Morgiel J, et al. Hot pressed and spark plasma sintered zirconia/carbon nanofiber composites. J Eur Ceram Soc. 2009;29:3177–3184.
   Web of Science ®Google Scholar
• Stawarczyk B, Özcan M, Hallmann L, et al. The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio. Clin Oral Invest. 2013;17:269–274.
   PubMed Web of Science ®Google Scholar
• Inam F, Yan H, Peijs T, et al. The sintering and grain growth behaviour of ceramic–carbon nanotube nanocomposites. Compos Sci Technol. 2010;70:947–952.
   Web of Science ®Google Scholar