Effect of sintering aids on microstructure and properties of textured SiC ceramics prepared in 6 T

References

• Yuan R, Kruzic JJ, Zhang XF, et al. Ambient to high-temperature fracture toughness and cyclic fatigue behavior in Al-containing silicon carbide ceramics. Acta Mater. 2003;51:6477–6491.
   Web of Science ®Google Scholar
• Liang H, Yao X, Zhang J, et al. Low temperature pressureless sintering of α-SiC with Al2O3 and CeO2 as additives. J Eur Ceram Soc. 2014;34:831–835.
   Web of Science ®Google Scholar
• Carisey T, Levin I, Brandon DG. Microstructure and mechanical properties of textured Al2O3. J Eur Ceram Soc. 1995;15:283–289.
   Web of Science ®Google Scholar
• Seabaugh MM, Kerscht IH, Messing GL. Texture development by templated grain growth in liquid-phase-sintered alumina. J Am Ceram Soc. 1997;80:1181–1188.
   Web of Science ®Google Scholar
• Suzuki TS, Sakka Y, Kitazawa K. Orientation amplification of alumina by colloidal filtration in a strong magnetic field and sintering. Adv Eng Mater. 2001;3:490–492.
   Web of Science ®Google Scholar
• Suzuki TS, Sakka Y. Fabrication of textured Titania by slip casting in a high magnetic field followed by heating. Jpn J Appl Phys. 2002;41:L1272–L1274.
   Web of Science ®Google Scholar
• Yang ZG, Yu JB, Li CJ, et al. Effect of β-Si3N4 initial powder size on texture development of porous Si3N4 ceramics prepared by gel casting in a magnetic field. Trans Ind Ceram Soc. 2016;75:256–262.
   Web of Science ®Google Scholar
• Suzuki TS, Uchikoshi T, Sakka Y. Fabrication of textured α-SiC using colloidal processing and a strong magnetic field. Mater Trans. 2007;48:2883–2887.
   Web of Science ®Google Scholar
• Suzuki TS, Uchikoshi T, Sakka Y. Effect of sintering conditions on microstructure orientation in α-SiC prepared by slip casting in a strong magnetic field. J Eur Ceram Soc. 2010;30:2813–2817.
   Web of Science ®Google Scholar
• Lee SH, Feng L, Yin J, et al. Dense SiC containing strongly aligned plate-like grains by magnetic treatment. Ceram Inter. 2015;41:5079–5084.
   Web of Science ®Google Scholar
• Chen WW, Kinemuchi Y, Tamura T, et al. Grain-oriented calcium hydroxyapatite ceramic and film prepared by magnetic alignment. Mater Lett. 2007;61:6–9.
   Web of Science ®Google Scholar
• Yang ZG, Yu JB, Deng K, et al. Fabrication of textured Si3N4 ceramics with β-Si3N4 powders as raw material by gel-casting under strong magnetic field. Mater Lett. 2014;135:218–221.
   Web of Science ®Google Scholar
• Yang JL, Dai CL, Huang Y. Controllable forming technology in gel-casting. Mater Sci Forum. 2005;475-479:1325–1328.
   Google Scholar
• Mohanta K, Bhargava P. Comparison of two different commercially available polyacrylate dispersants for gelcasting alumina slurries. Trans Indian Ceram Soc. 2005;64:21–24.
   Google Scholar
• Abdul Haleem B, Bhuvana R, Udayakumar A. Gelcasting of strontium doped lanthanum manganite for solid oxide fuel cell applications. Trans Indian Ceram Soc. 2009;68:139–144.
   Web of Science ®Google Scholar
• Ghosh D, Dhara S, Bhargava P. Simplified aqueous gelcasting of silicon carbide ceramics. Trans Indian Ceram Soc. 2004;63:199–202.
   Google Scholar
• Yang ZG, Yu JB, Ren ZM, et al. Preparation of c-axis textured SiC ceramics by a strong magnetic field of 6T assisted gel-casting process. Ceram Inter. 2016;42:6168–6177.
   Web of Science ®Google Scholar
• Zhou Y, Tanaka H, Otani S, et al. Low-temperature pressureless sintering of alpha-SiC with Al4C3-B4C-C additions. J Am Ceram Soc. 1999;82:1959–1964.
   Web of Science ®Google Scholar
• Prochazki S, Scanlan RM. Effect of boron and carbon on sintering of SiC. J Am Ceram Soc. 1975;58: 72–72.
   Web of Science ®Google Scholar
• Sciti D, Bellosi A. Effects of additives on densification, microstructure and properties of liquid-phase sintered silicon carbide. J Mater Sci. 2000;35:3849–3855.
   Web of Science ®Google Scholar
• Magnani G, Beaulardi L, Pilotti L. Properties of liquid phase pressureless sintered silicon carbide obtained without sintering bed. J Eur Ceram Soc. 2005;25:1619–1627.
   Web of Science ®Google Scholar
• Lotgering K. Topotactical reactions with ferrimagnetic oxides having hexagonal crystal structures—I. J Inorg Nucl Chem. 1959;9:113–123.
   Web of Science ®Google Scholar
• Malik R, Kim YH, Kim YW. Effect of additive content on the mechanical and thermal properties of pressureless liquid-phase sintered SiC. J Asian Ceram Soc. 2020;8:448–459.
   Web of Science ®Google Scholar
• Suzuki TS, Uchikoshi T, Sakka Y. Effect of sintering additive on crystallographic orientation in AlN prepared by slip casting in a strong magnetic field. J Euro Ceram Soc. 2009;29:2627–2633.
   Web of Science ®Google Scholar
• Zhu XW, Sakka Y. Textured silicon nitride: processing and anisotropic properties. Sci Technol Adv Mater. 2009;9:033001.
   Web of Science ®Google Scholar
• Wu CY, Li SQ, Sassa K, et al. Theoretical analysis on crystal alignment of feeble magnetic materials under high magnetic field. Mater Trans. 2005;46:1311–1317.
   Web of Science ®Google Scholar
• Kimura T. Study on the effect of magnetic fields on polymeric materials and its application. Polym J. 2003;35:823–843.
   Web of Science ®Google Scholar
• Magnani G, Brentari A, Burresi E, et al. Pressureless sintered silicon carbide with enhanced mechanical properties obtained by the two-step sintering method. Ceram Int. 2014;40:1759–1763.
   Web of Science ®Google Scholar
• Suzuki TS, Sakka Y. Control of texture in ZnO by slip casting in a strong magnetic field and heating. Chem Lett. 2002;31:1204–1205.
   Web of Science ®Google Scholar