References
- Kaiser A, Lobert M, Telle R. Thermal stability of zircon (ZrSiO4). J Eur Ceram Soc. 2008;28(11):2199–2211.
- Xiang H, Feng Z, Li Z, et al. Theoretical investigations on mechanical and thermal properties of MSiO 4 (M= Zr, Hf). J Mater Res. 2015;30(13):2030–2039.
- Comstock GF. Some experiments with Zircon and Zirconia refractories. J Am Ceram Soc. 1933;16(1‐12):12–35.
- Ewing RC, Lutze W, Weber WJ. Zircon: A host-phase for the disposal of weapons plutonium. J Mater Res. 1995;10(2):243–246.
- Gediga J, Morfino A, Finkbeiner M, et al. Life cycle assessment of zircon sand. Int J Life Cycle Assess. 2019;24(11):1976–1984.
- Rendtorff N, Garrido L, Aglietti E. Mullite–zirconia–zircon composites: properties and thermal shock resistance. Ceram Int. 2009;35(2):779–786.
- Chiker F, Boukabrine F, Khachai H, et al. Investigating the structural, thermal, and electronic properties of the Zircon-Type ZrSiO4, ZrGeO4 and HfSiO4 compounds. J Electron Mater. 2016;45(11):5811–5821.
- Rignanese GM, Detraux F, Gonze X, et al. Dielectric constants of Zr silicates: a first-principles study. Phys Rev Lett. 2002;89(11):117601.
- Wilk GD, Wallace RM. Stable zirconium silicate gate dielectrics deposited directly on silicon. Appl Phys Lett. 2000;76(1):112–114.
- Carbonneau X, Hamidouche M, Olagnon C, et al. High temperature behaviour of a zircon ceramic. Key Eng Mater. 1997;132(136):571–574.
- Gauna MR, Conconi MS, Suarez G, et al. Dense zircon (ZrSiO4) ceramics by a simple milling-sintering route. Sci Sintering. 2018;50(1):15–28.
- Nakamori F, Ohishi Y, Muta H, et al. Mechanical and thermal properties of ZrSiO4. J Nucl Sci Technol. 2017;54(11):1267–1273.
- Rendtorff NM, Grasso S, Hu C, et al. Dense zircon (ZrSiO4) ceramics by high energy ball milling and spark plasma sintering. Ceram Int. 2012;38(3):1793–1799.
- Huang S, Li Q, Wang Z, et al. Effect of sintering aids on the microstructure and oxidation behavior of hot-pressed zirconium silicate ceramic. Ceram Int. 2017;43(1,Part A):875–879.
- Shi Y, Huang X, Yan D. Fabrication of hot-pressed zircon ceramics: mechanical properties and microstructure. Ceram Int. 1997;23(5):457–462.
- Ebadzadeh T, Valefi M. Microwave-assisted sintering of zircon. J Alloys Compd. 2008;448(1):246–249.
- Awaad M, Kenawy SH. Sintering of zircon: the role of additives. Br Ceram Trans. 2003;102(2):69–72.
- Rendtorff NM, Grasso S, Hu C, et al. Zircon–zirconia (ZrSiO4–ZrO2) dense ceramic composites by spark plasma sintering. J Eur Ceram Soc. 2012;32(4):787–793.
- Cologna M, Rashkova B, Raj R. Flash sintering of Nanograin Zirconia in <5 s at 850°C. J Am Ceram Soc. 2010;93(11):3556–3559.
- Biesuz M, Sglavo VM. Flash sintering of ceramics. J Eur Ceram Soc. 2019;39(2–3):115–143.
- Raj R. Analysis of the power density at the onset of flash sintering. J Am Ceram Soc. 2016;99(10):3226–3232.
- Perez-Maqueda LA, Gil-Gonzalez E, Perejon A, et al. Flash sintering of highly insulating nanostructured phase-pure BiFeO3. J Am Ceram Soc. 2017;100(8):3365–3369.
- Yu JH, McWilliams BA, Parker TC. Densification behavior of flash sintered boron suboxide. J Am Ceram Soc. 2018;101(11):4976–4982.
- Jha SK, Raj R. Electric fields obviate constrained sintering. J Am Ceram Soc. 2014;97(10):3103–3109.
- Todd RI, Zapata-Solvas E, Bonilla RS, et al. Electrical characteristics of flash sintering: thermal runaway of Joule heating. J Eur Ceram Soc. 2015;35(6):1865–1877.
- Zhang Y, Jung J-I, Luo J. Thermal runaway, flash sintering and asymmetrical microstructural development of ZnO and ZnO–Bi2O3 under direct currents. Acta Materialia. 2015;94:87–100.
- Muccillo R, Kleitz M, Muccillo ENS. Flash grain welding in yttria stabilized zirconia. J Eur Ceram Soc. 2011;31(8):1517–1521.
- Grasso S, Saunders T, Porwal H, et al. Flash spark plasma sintering (FSPS) of pure ZrB 2. J Am Ceram Soc. 2014;97(8):2405–2408.
- Manière C, Lee G, Olevsky EA. All-materials-inclusive flash spark plasma sintering. Sci Rep. 2017;7(1):15071.
- Manière C, Riquet G, Marinel S. Dielectric properties of flash spark plasma sintered BaTiO3 and CaCu3Ti4O12. Scr Mater. 2019;173:41–45.
- McKinnon R, Grasso S, Tudball A, et al. Flash spark plasma sintering of cold-Pressed TiB2-hBN. J Eur Ceram Soc. 2017;37(8):2787–2794.
- Biesuz M, Sglavo VM. Flash sintering of alumina: effect of different operating conditions on densification. J Eur Ceram Soc. 2016;36(10):2535–2542.
- Cologna M, Francis JSC, Raj R. Field assisted and flash sintering of alumina and its relationship to conductivity and MgO-doping. J Eur Ceram Soc. 2011;31(15):2827–2837.
- Wallace RW, Ruh E. Electrical resistivity of refractories. J Am Ceram Soc. 1967;50(7):358–364.
- Dong Y. On the hotspot problem in flash sintering. arXiv: Materials Science. 2017.
- Campos JV, Lavagnini IR, Silva JG, et al. Flash sintering scaling-up challenges: influence of the sample size on the microstructure and onset temperature of the flash event. Scr Mater. 2020;186:1–5.
- Biesuz M, Sglavo VM Field assisted sintering of silicate glass-containing alumina. In: Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II: A Collection of Papers Presented at the 39th International Conference on Advanced Ceramics and Composites. Hoboken, NJ, USA: John Wiley & Sons, Ltd; 2015. p. 75–81.
- Kumar MKP, Yadav D, Lebrun J-M, et al. Flash sintering with current rate: A different approach. J Am Ceram Soc. 2019;102(2):823–835.
- Lavagnini R I, Campos JV, Ferreira JA, et al. Microstructural evolution of 3YSZ flash-sintered with current ramp control. J Am Ceram Soc. 2020;103(6):3493–3499.
- Gauna MR, Rendtorff NM, Conconi MS, et al. Fine zircon (ZrSiO4) powder mechanical activation, a Perturbed Angular Correlation (PAC) analysis. Ceram Int. 2017;43(15):11929–11934.
- Raj R. Joule heating during flash-sintering. J Eur Ceram Soc. 2012;32(10):2293–2301.
- Veazey WR, Hodgman CD. Handbook of chemistry and physics. Vol. 7. Chemical Rubber Publishing Company, Boca Raton, Florida; 1919.
- Biesuz M, Pinter L, Saunders T, et al. Investigation of electrochemical, optical and thermal effects during flash sintering of 8YSZ. Materials. 2018;11(7):1214.
- Grimley CA, Prette ALG, Dickey EC. Effect of boundary conditions on reduction during early stage flash sintering of YSZ. Acta Materialia. 2019;174:271–278.
- Sinhamahapatra A, Jeon J-P, Kang J, et al. Oxygen-deficient Zirconia (ZrO2−x): a new material for solar light absorption. Sci Rep. 2016;6(1):27218.
- Grimley CA, Funni S, Green C, et al. Perspective of flash sintering: the effect of AC current ramp rate on microstructure evolution. J Eur Ceram Soc. 2020. DOI:10.1016/j.jeurceramsoc.2020.11.040
- Garvie RC. Stabilization of the tetragonal structure in zirconia microcrystals. J Phys Chem. 1978;82(2):218–224.
- Gupta TK, Bechtold JH, Kuznicki RC, et al. Stabilization of tetragonal phase in polycrystalline zirconia. J Mater Sci. 1977;12(12):2421–2426.
- Mori T, Yamamura H, Kobayashi H, et al. Preparation of high-purity ZrSiO4 powder using sol–gel processing and mechanical properties of the sintered body. J Am Ceram Soc. 1992;75(9):2420–2426.
- Suárez G, Acevedo S, Rendtorff NM, et al. Colloidal processing, sintering and mechanical properties of zircon (ZrSiO4). Ceram Int. 2015;41(1,Part B):1015–1021.
- Tartaj P. Zircon formation from nanosized powders obtained by a reverse micelle process. J Am Ceram Soc. 2005;88(1):222–224.
- Anjali MC, Biswas P, Chakravarty D, et al. Low temperature in-situ reaction sintering of zircon: alumina composites trough spark plasma sintering. Sci Sintering. 2012;44(3):323–330.