In-situ TiC-reinforced Ni-based composite coatings fabricated by ultrasonic-assisted electrospark powder deposition

References

• Kiryukhantsev-Korneev P, Sytchenko A, Sheveyko A, et al. Two-layer nanocomposite TiC-based coatings produced by a combination of pulsed cathodic arc evaporation and vacuum electro-spark alloying. Materials. 2020;13(3):15.
   Web of Science ®Google Scholar
• Jiao Z, Peterkin S, Felix L, et al. Surface modification of 304 stainless steel by electro-spark deposition. J Mater Eng Perform. 2018;27(9):4799–4809.
   Web of Science ®Google Scholar
• Leo P, Renna G, Casalino G. Study of the direct metal deposition of AA2024 by ElectroSpark for coating and reparation scopes. Appl Sci Basel. 2017;7(9):16.
   Web of Science ®Google Scholar
• Renna G, Leo P, Casalino G, et al. Repairing 2024 aluminum alloy via electrospark deposition process: a feasibility study. Adv Mater Sci Eng. 2018;20181. doi:10.1155/2018/8563054
   Google Scholar
• Wei X, Chen Z, Zhong J, et al. Feasibility of preparing Mo2FeB2 -based cermet coating by electrospark deposition on high speed steel. Surf Coat Tech. 2016;296:58–64.
   Web of Science ®Google Scholar
• Qiao L, Wu Y, Hong S, et al. Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying. Ceram Int. 2021;47(2):1829–1836.
   Web of Science ®Google Scholar
• Salmaliyan M, Malek Ghaeni F, Ebrahimnia M. Effect of electro spark deposition process parameters on WC-Co coating on H13 steel. Surf Coat Tech. 2017;321:81–89.
   Web of Science ®Google Scholar
• Wang XH, Liu SS, Zhao GL, et al. In-situ formation ceramic particles reinforced Fe-based composite coatings produced by ultrasonic assisted laser melting deposition processing. Opt Laser Technol. 2021;136:106746.
   Web of Science ®Google Scholar
• Straumal BB, Konyashin I, Ries B, et al. Pseudopartial wetting of WC/WC grain boundaries in cemented carbides. Mater Lett. 2015;147:105–108.
   Web of Science ®Google Scholar
• Yang L, Li Z, Zhang Y, et al. Al-TiC in situ composite coating fabricated by low power pulsed laser cladding on AZ91D magnesium alloy. Appl Surf Sci. 2018;435:1187–1198.
   Web of Science ®Google Scholar
• Ma QS, Dong ZX, Ren NN, et al. Microstructure and mechanical properties of multiple in-situ-phases-reinforced nickel composite coatings deposited by wide-band laser. Coatings. 2021;11(1):13.
   Web of Science ®Google Scholar
• Zhao H, J-j L, Zheng Z-Z, et al. Microstructure and high-temperature wear properties of in situ TiC composite coatings by plasma transferred arc surface alloying on gray cast iron. Int J Min Met Mater. 2015;22(12):1273–1282.
   Web of Science ®Google Scholar
• Tkachivskyi D, Juhani K, Surzenkov A, et al. HVOF sprayed Fe-based wear-resistant coatings with carbide reinforcement, synthesized in situ and by mechanically activated synthesis. Coatings. 2020;10(11):15.
   Web of Science ®Google Scholar
• Zhang LZ, Zhao ZY, Bai PK, et al. In-situ synthesis of TiC/graphene/Ti6Al4V composite coating by laser cladding. Mater Lett. 2020;270:127711.
   Web of Science ®Google Scholar
• Frangini S, Masci A. A study on the effect of a dynamic contact force control for improving electrospark coating properties. Surf Coat Tech. 2010;204(16–17):2613–2623.
   Web of Science ®Google Scholar
• Enrique PD, Jiao Z, Zhou NY, et al. Effect of microstructure on tensile properties of electrospark deposition repaired Ni-superalloy. Mat Sci Eng A Struct. 2018;729:268–275.
   Web of Science ®Google Scholar
• Loginov PA, Levashov EA, Potanin AY, et al. Sintered Ti–Ti 3 P–CaO electrodes and their application for pulsed electrospark treatment of titanium. Ceram Int. 2016;42(6):7043–7053.
   Web of Science ®Google Scholar
• Kudryashov AE, Lebedev DN, Potanin AY, et al. Structure and properties of coatings produced by pulsed electrospark deposition on nickel alloy using Mo-Si-B electrodes. Surf Coat Tech. 2018;335:104–117.
   Web of Science ®Google Scholar
• Burkov AA, Pyachin SA. Investigation of WC-Co electrospark coatings with various carbon contents. J Mater Eng Perform. 2014;23(6):2034–2042.
   Web of Science ®Google Scholar
• Yuan YL, Wu HH, You M, et al. Improving wear resistance and friction stability of FeNi matrix coating by in-situ multi-carbide WC-TiC via PTA metallurgical reaction. Surf Coat Tech. 2019;378:124957.
   Web of Science ®Google Scholar
• Wang D, Wang W, Wang M, et al. Effect of operating voltage on microstructure and microhardness of NiCoCrAlYTa-Y2O3 composite coatings on single crystal superalloy produced by electrospark deposition. Surf Coat Tech. 2019;358:628–636.
   Web of Science ®Google Scholar
• Wei X, Chen Z, Zhong J, et al. Facile preparation of nanocrystalline Fe2B coating by direct electro-spark deposition of coarse-grained Fe2B electrode material. J Alloy Compd. 2017;717:31–40.
   Web of Science ®Google Scholar
• Hong X, Tan Y, Zhou C, et al. Microstructure and tribological properties of Zr-based amorphous-nanocrystalline coatings deposited on the surface of titanium alloys by Electrospark Deposition. Appl Surf Sci. 2015;356:1244–1251.
   Web of Science ®Google Scholar
• Rajkumar VB, Chen S-W. Thermodynamic modeling of Ag-Ni system combining experiments and molecular dynamic simulation. J Electron Mater. 2017;46(4):2282–2289.
   Web of Science ®Google Scholar
• Dhandapani VS, Thangavel E, Arumugam M, et al. Effect of Ag content on the microstructure, tribological and corrosion properties of amorphous carbon coatings on 316L SS. Surf Coat Tech. 2014;240:128–136.
   Web of Science ®Google Scholar
• Algodi SJ, Murray JW, Fay MW, et al. Electrical discharge coating of nanostructured TiC-Fe cermets on 304 stainless steel. Surf Coat Tech. 2016;307:639–649.
   Web of Science ®Google Scholar
• Wang X-R, Wang Z-Q, Lin T-S, et al. Mass transfer trends of AlCoCrFeNi high-entropy alloy coatings on TC11 substrate via electrospark − computer numerical control deposition. J Mater Process Tech. 2017;241:93–102.
   Web of Science ®Google Scholar
• Ahmed N, Murray JW, Yuzawa T, et al. Formation of thick electrical discharge coatings. J Mater Process Tech. 2020;285:116801.
   Web of Science ®Google Scholar
• Liu Y, Wang D, Deng C, et al. Feasibility study on preparation of coatings on Ti–6Al–4V by combined ultrasonic impact treatment and electrospark deposition. Mater Design. 2014;634:88–92.
   Google Scholar
• Ribalko AV, Korkmaz K, Sahin O. Intensification of the anodic erosion in electrospark alloying by the employment of pulse group. Surf Coat Tech. 2008;202(15):3591–3599.
   Web of Science ®Google Scholar
• Farahmand P, Liu S, Zhang Z, et al. Laser cladding assisted by induction heating of Ni–WC composite enhanced by nano-WC and La2O3. Ceram Int. 2014;40(10):15421–15438.
   Web of Science ®Google Scholar
• Zhou S, Zeng X, Hu Q, et al. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization. Appl Surf Sci. 2008;255(5):1646–1653.
   Web of Science ®Google Scholar
• Chigrinova NM, Lovygin SI, Chigrinov VE. Role of ultrasound in mechanisms of anode-cathode interactions during electrospark alloying. Sci Tech. 2016;15(5):380–390.
   Google Scholar
• Wu Q, Li W, Zhong N, et al. Microstructure and wear behavior of laser cladding VC–Cr7C3 ceramic coating on steel substrate. Mater Design. 2013;49:10–18.
   Web of Science ®Google Scholar
• Wang XH, Zou ZD, Qu SY, et al. Microstructure and properties of the TiC/Fe-based alloy hardfacing layers. J Mater Sci. 2005;40(14):3629–3633.
   Web of Science ®Google Scholar
• Ma Q, Li Y, Wang J. Effects of Ti addition on microstructure homogenization and wear resistance of wide-band laser clad Ni60/WC composite coatings. Int J Refract Met H. 2017;64:225–233
   Web of Science ®Google Scholar
• Huang SM, Sun DQ, Wang WQ, et al. Microstructures and properties of in-situ TiC particles reinforced Ni-based composite coatings prepared by plasma spray welding. Ceram Int. 2015;41(9):12202–12210.
   Web of Science ®Google Scholar
• Chen GQ, Fu XS, Wei YH, et al. Microstructure and wear properties of nickel-based surfacing deposited by plasma transferred arc welding. Surf Coat Tech. 2013;228:S276–S282.
   Web of Science ®Google Scholar
• Zhao H, Li J, Zheng Z, et al. The microstructures and tribological properties of composite coatings formed via PTA surface alloying of copper on nodular cast iron. Surf Coat Tech. 2016;286:303–312.
   Web of Science ®Google Scholar