Two-step simulation of piezoelectric properties of porous PZT according to porosity

References

• Newnham RE, Skinner DP, Cross LE. Connectivity and piezoelectric-pyroelectric composites. Mater Res Bull. 1978;13(5):525–536.
   Web of Science ®Google Scholar
• Tressler JF, Alkoy S, Dogan A, et al. Functional composites for sensors, actuators and transducers. Compos Part A. 1999;30(4):477–482. www.comsol.com
   Web of Science ®Google Scholar
• Rittenmyer K, Shrout T, Schulze WA, et al. Piezoelectric 3-3 composites. Ferroelectrics. 1982;41(1):189–195.
   Web of Science ®Google Scholar
• Galassi C, Roncari E, Capiani C, et al. Processing of porous PZT materials for underwater acoustics. Ferroelectrics. 2002;268(1):47–52.
   Web of Science ®Google Scholar
• Mercadelli E, Galassi C. How to make porous piezoelectrics? Review on processing strategies. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. 2020;(1):1. doi:10.1109/tuffc.2020.3006248
   Google Scholar
• Wu DH, Chien WT, Yang CJ, et al. Coupled-field analysis of piezoelectric beam actuator using FEM. Sens Actu A: Physical. 2005;118(1):171–176.
   Web of Science ®Google Scholar
• Di Gaeta A, Glielmo L, Giglio V. Modeling of an electromechanical engine valve actuator based on ahybrid analytical–FEM approach. IEEE ASME Trans Mechatron. 2008;13(6): 625–637. doi:10.1109/TMECH.2008.2003469
   Web of Science ®Google Scholar
• Li S, Zheng L, Jiang W, et al. Characterization of full set material constants of piezoelectric materials based on ultrasonic method and inverse impedance spectroscopy using only one sample. J Appl Phys. 2013;114(10). doi:10.1063/1.4821107
   Web of Science ®Google Scholar
• Perez N, Andrade M, Buiochi F, et al. Identification of elastic, dielectric, and piezoelectric constants in piezoceramic disks. IEEE Trans Ultrason Ferroelectr Freq Control. 2010;57(12):2772.
   PubMed Web of Science ®Google Scholar
• Wang HF, Cao W. Determination of full set material constants from phase velocities. J Appl Phys. 2002;92(8):4578.
   Web of Science ®Google Scholar
• Joo H, Lee C, Rho J, et al. Identification of material constants for piezoelectric transformers by three-dimensional, finite-element method and a design-sensitivity method. IEEE Trans Ultrason Ferroelectr Freq Control. 2003;50(8):965.
   PubMed Web of Science ®Google Scholar
• Rupitsch S, Lerch R. Inverse method to estimate material parameters for piezoceramic disc actuators. Appl Phys A. 2009;97:735.
   Web of Science ®Google Scholar
• Zhu S, Jiang B, Cao W. Characterization of piezoelectric materials using ultrasonic and resonant techniques. Proc SPIE. 1998;3341(154). doi:10.1117/12.307996
   Google Scholar
• Pérez N, Buiochi F, Brizzotti Andrade M, et al. Numerical characterization of piezoceramics using resonance curves. Materials. 2016;9(2):71.
   PubMed Web of Science ®Google Scholar
• Kaltenbacher B, Kaltenbacher M, Lerch R, et al. (2000). Identification of material tensors for piezoceramic materials. 2000 IEEE Ultrasonics Symposium. Proceedings. An International Symposium [October 22-25], San Juan, Puerto Rico(n.d.). CH37121. doi:10.1109/ultsym.2000.921501
   Google Scholar
• Joo H-W, Lee C-H, Rho J-S, et al. Identification of material constants for piezoelectric transformers by three-dimensional, finite-element method and a design-sensitivity method. IEEE Trans Ultrason Ferroelectr Freq Control. 2003;50(8):965–971.
   PubMed Web of Science ®Google Scholar
• Boumchedda K, Hamadi M, Fantozzi G. Properties of a hydrophone produced with porous PZT ceramic. J Eur Ceram Soc. 2007;27(13–15):4169–4171.
   Web of Science ®Google Scholar
• Ting RY. Piezoelectric properties of a porous PZT ceramic. Ferroelectrics. 1985;65(1):11–20.
   Google Scholar
• Eichhorn F, Kakimoto K, Greil P, et al. Influence of porosity orientation on physical properties in porous PZT ceramics. Adv Eng Mater. 2019;21:1900390. doi:10.1002/adem.201900390
   Web of Science ®Google Scholar
• Wersing W, Lubitz K, Mohaupt J. Dielectric, elastic and piezoelectric properties of porous pzt ceramics. Ferroelectrics. 1986;68(1):77–97.
   Google Scholar
• Rybyanets AN. Porous piezoceramics: theory, technology, and properties. IEEE Trans Ultrason Ferroelectr Freq Control. 2011;58(7):1492–1507.
   PubMed Web of Science ®Google Scholar
• COMSOL Multiphysics® v. 6.0. Stockholm Sweden: COMSOL AB; 2021.
   Google Scholar
• Shin HYL, Hong IG, Kim JH, et al. Submitted for the JAsCeRS, 2022,Sep.
   Google Scholar
• Huang Y-H, Yen C-Y, Huang T-R. Dynamic non-destructive evaluation of piezoelectric materials to verify on accuracy of transversely isotropic material property measured by resonance method. Appl Sci. 2020;10(15):5072.
   Google Scholar
• Roscow JI, Lewis RWC, Taylor J, et al. (2017). Finite element modelling of bilayer porous PZT structures with improved hydrostatic figures of merit. 2017 Joint IEEE International Symposium on the Applications of Ferroelectric (ISAF)/International Workshop on Acoustic Transduction Materials and Devices (IWATMD)/Piezoresponse Force Microscopy (PFM) [May 7-11], Atlanta, USA. doi:10.1109/isaf.2017.8000217
   Google Scholar
• Zeng T, Dong X, Mao C, et al. Effects of pore shape and porosity on the properties of porous PZT 95/5 ceramics. J Eur Ceram Soc. 2007;27(4):2025–2029.
   Web of Science ®Google Scholar
• ZHANG H, LI J, ZHANG B. Microstructure and electrical properties of porous PZT ceramics derived from different pore-forming agents. Acta Materialia. 2007;55(1):171–181.
   Web of Science ®Google Scholar
• Marutake M, Ikeda T. Elastic constants of porous materials, especially of BaTiO3Ceramics. J Phys Soc Jpn. 1956;11(8):814–818.
   Google Scholar