947
Views
0
CrossRef citations to date
0
Altmetric
Full Length Article

The effect of SiC coatings microstructure on their infrared emissivity

, , , &
Pages 98-104 | Received 24 Jun 2022, Accepted 14 Dec 2022, Published online: 28 Dec 2022

References

  • Nakamura S, Fasol G, Pearton SJ. The Blue Laser Diode:The Complete Story. Berlin: Springer; 2000.
  • Schubert EF. Light-Emitting Diodes. Cambridge: Cambridge University Press; 2006.
  • Haitz R, Kish F, Tsao J, et al. The case for a national research program on semiconductor lighting (white paper presented at the Optoelectronics Industry Development Association. Washington DC: Sandia National Laboratories Technical Report SAND 2000—1612; 1999.
  • Krames MR, Shchekin OB, Mueller-Mach R, et al. Status and future of high-power light-emitting diodes for solid-state lighting. J Display Technol. 2007;3(2):160.
  • Han J, Figiel JJ, Crawford MH, et al. OMVPE growth and gas-phase reactions of AlGaN for UV emitters. J Cryst Growth. 1998;195(1—4):291.
  • Chen CH, Liu H, Steigerwald D, et al. A study of parasitic reactions between NH3 and TMGa or TMAI. J Electron Mater. 1996;25(6):1004.
  • Sayyah K, Chung B-C, Gershenzon M. The influence of TMA and SiH4 on the incorporation rate of Ga in AlxGa1− xN crystals grown from TMG and NH3. J Cryst Growth. 1986;77(1—3):424.
  • Nakamura F, Hashimoto S, Hara M, et al. AlN and AlGaN growth using low-pressure metalorganic chemical vapor deposition. Journal of Crystal Growth. 1998;195(1—4):280.
  • Creighton JR, Koleske DD, Mitchell CC. Emissivity-correcting near-UV pyrometry for group-III nitride OMVPE. J Cryst Growth. 2006;287(2):572.
  • García-Santos V, Coll C, Valor E, et al. Analyzing the anisotropy of thermal infrared emissivity over arid regions using a new MODIS land surface temperature and emissive product (MOD21. Remote Sens Environ. 2015;169:212–221.
  • Zhang K, Jiao L, Zhao X, et al. An instantaneous approach for determining the infrared emissivity of swine surface and the influencing factors. J Therm Biol. 2016;57:78–83.
  • Sobrino JA, Jiménez-Muñoz JC. Minimum configuration of thermal infrared bands for land surface temperature and emissivity estimation in the context of potential future missions. Remote Sens Environ. 2014;148:158–167.
  • Rodiet C, Remy B, Degiovanni A. Optimal wavelengths obtained from laws analogous to the Wien’s law for monospectral and bispectral methods, and general methodology for multispectral temperature measurements taking into account global transfer function including non-uniform emissivity of surfaces. Infrared Phys Technpl. 2016;76:444–454.
  • Zhang YC, Chen YM, Luo C. A method for improving temperature measurement precision on the uncooled infrared thermal imager. Measurement. 2015;74:64–69.
  • Guan SH, WANG BY, ZHAO WL, et al., Study of Temperature Measurement Precision Base on Infrared Thermal Imager. Electro-opt Tech Appl. 2012;27(3):85–88.
  • Huang Z, Zhou W, Tang X, et al. Effects of substrate roughness on infrared-emissivity characteristics of Au films deposited on Ni alloy. Thin Solid Films. 2011;519(10):3100–3106.
  • Wang F, Cheng L, Zhang Q, et al. Effect of surface morphology and densification on the infrared emissivity of C/SiC composites. Appl Surf Sci. 2014;313:670–676.
  • Wang F, Cheng L, Mei H, et al. Effect of Surface Microstructures on the Infrared Emissivity of Graphite. Int J Thermophys. 2014;35(1):62–75.
  • Liu J, Chen Z, Chai P, et al. The effect of deposition temperature on microstructure and mechanical properties of SiC coatings on graphite. J Aust Ceram Soc. 2022;55(2):557–562.
  • Agababov SG. Effect of the roughness of the surface of a solid body on its radiation properties and methods for their experimental determination. High Temp. 1968;6:76–85.
  • Wen CD, Mudawar I. Modeling the effects of surface roughness on the emissivity of aluminum alloys. Int J Heat Mass Transfer. 2006;49(23—24):4279–4289.