Effect of sintering temperature on physical, mechanical, and electrical properties of nano silica particles synthesized from Indonesia local sand for piezoelectric application

References

• Chen Y, Ye H, Wang X, et al. Grain size effects on the electric and mechanical properties of submicro BaTiO3 ceramics. J Eur Ceram Soc. 2020;40(2):391–400.
   Web of Science ®Google Scholar
• Wang J, Wu Y, Yang Z, et al. Design and experimental performance of a low-frequency piezoelectric motor based on inertia drive. Sens Actuat A: Phys. 2020;304:111854.
   Web of Science ®Google Scholar
• Hu S, Luo C, Li P, et al. Effect of sintered temperature on structural and piezoelectric properties of Barium Titanate ceramic prepared by nano-scale precursors. J Mater Sci. 2017;28(13):9322–9327.
   Web of Science ®Google Scholar
• Zhang Y, Chen L, Zeng J, et al. Aligned porous barium titanate/hydroxyapatite composites with high piezoelectric coefficients for bone tissue engineering. Mater Sci Eng C. 2014;39(1):143–149.
   PubMedGoogle Scholar
• Gao J, Xue D, Liu W, et al. Recent progress on BaTiO3-based piezoelectric ceramics for actuator applications. Actuators. 2017;6(3):3.
   Web of Science ®Google Scholar
• Tichy J, Erhart J, Kittinger E, et al. Fundamentals of Piezoelectric Sensorics. Verlag Berlin Heidelberg: Spinger; 2010. p. 1–13.
   Google Scholar
• Ismail A, Saputri LNMZ, Dwiatmoko AA, et al. A facile approach to synthesis of silica nanoparticles from silica sand and their application as superhydrophobic material. J Asian Ceram Soc. 2021;9(2):665–672.
   Web of Science ®Google Scholar
• Hamzah MS, Wildan MW, Kusmono,et al. Synthesis of Silica Nanoparticles from Silica Sand via Vibration Assisted Alkaline Solution Method. Inter J Engin Tran A. 2022;35(5): 1300–1306
   Web of Science ®Google Scholar
• Vatalis KI, Charalambides G, Benetis NP, et al. Market of high purity Quartz innovative applications. Procedia Econ Finance. 2019;24:734–742.
   Google Scholar
• Torbati FN, Hosseini SM, Razzaghi KM. Effect of the silica-rubber interface on the mechanical, viscoelastic, and tribological behaviors of filled styrene-butadiene rubber vulcanizates. Polym J. 2020;52(10):1223–1234.
   Web of Science ®Google Scholar
• Ahmad S, Baghabra Al-Amoudi OS, Khan SMS, et al. Effect of silica fume inclusion on the strength, shrinkage and durability characteristics of natural pozzolan-based cement concrete. Case Studies Construction Mater. 2022;17(February):01255.
   Google Scholar
• Favors Z, Wang W, Bay HH, et al. Scalable synthesis of nano-silicon from beach sand for long cycle life Li-ion batteries. Sci Rep. 2014;4(1):1–7.
   Google Scholar
• Sarkar J, Mridha D, Sarkar J, et al. Biocatalysis and Agricultural Biotechnology Synthesis of nanosilica from agricultural wastes and its multifaceted applications: a review. Biocatal Agric Biotechnol. 2021;37(September):102–175.
   Google Scholar
• Jittabut P. Effect of nanosilica on mechanical and thermal properties of cement composites for thermal energy storage materials. Adv Mater Res. 2015;1131:182–185.
   Google Scholar
• Mentlík V, Michal O. Influence of SiO2 nanoparticles and nanofibrous filler on the dielectric properties of epoxy-based composites. Mater Lett. 2018;223:41–44.
   Web of Science ®Google Scholar
• Wahyudi A, Dessy A. Preparation of Nanosilica from Silica Sand Through Alkali Fusion. Indonesian Min J. 2013;16(3):149–153.
   Google Scholar
• Carmona VB, Oliveira RM, Silva WTL, et al. Nanosilica from rice husk: extraction and characterization. Ind Crops Prod. 2013;43(1):291–296.
   Google Scholar
• Chen H, Wang F, Zhang C, et al. Preparation of nano-silica materials: the concept from wheat straw. J Non-Crystalline Solids. 2010;356(50–51):2781–2785.
   Web of Science ®Google Scholar
• Boonmee A, Jarukumjorn K. Preparation and characterization of silica nanoparticles from sugarcane bagasse ash for using as a filler in natural rubber composites. Polym Bull. 2020;77(7):3457–3472.
   Web of Science ®Google Scholar
• Owoeye SS, Abegunde SM, Oji B. Effects of process variable on synthesis and characterization of amorphous silica nanoparticles using sodium silicate solutions as precursor by sol–gel method. 2021;Nanostructures Nano-Objects. 25:100625.
   Google Scholar
• Potapov V, Efimenko Y, Fediuk R, et al. Effect of hydrothermal nanosilica on the performances of cement concrete. Constr Build Mater. 2021;269:121–307.
   Web of Science ®Google Scholar
• Owoeye SS, Jegede FI, Borisade SG. Preparation and characterization of nano-sized silica xerogel particles using sodium silicate solution extracted from waste container glasses. Mater Chem Phys. 2020;248:122915.
   Web of Science ®Google Scholar
• El-Didamony H, El-Fadaly E, Amer AA, et al. Synthesis and characterization of low cost nanosilica from sodium silicate solution and their applications in ceramic engobes. Boletin de la Sociedad Espanola de Ceramica y Vidrio. 2020;59(1):31–43.
   Web of Science ®Google Scholar
• Wahyudi A, Amalia D. Preparation of nanosilica from silica sand through alkali fusion process. Indonesia Min J. 2014;16:149–153.
   Google Scholar
• Haruehansapong S, Pulngern T, Chucheepsakul S. Effect of the particle size of nanosilica on the compressive strength and the optimum replacement content of cement mortar containing nano-SiO2. Constr Build Mater. 2014;50:471–477.
   Web of Science ®Google Scholar
• Fu C, Guo R, Lin Z, et al. Effect of nanosilica and silica fume on the mechanical properties and microstructure of lightweight engineered cementitious composites. Constr Build Mater. 2021;298:123788.
   Web of Science ®Google Scholar
• Yang X, Lu D, Zhu B, et al. Phase transformation of silica particles in coal and biomass combustion processes. Environ Pollut. 2022;292(PA):118312.
   PubMedGoogle Scholar
• Zhong X, Cao L, Huang J, et al. Formula optimization and mechanical properties of thin porcelain ceramic plates mainly containing smoky quartz tailings. Ceram Int. 2022;48(16):24056–24062.
   Web of Science ®Google Scholar
• Sembiring S, Riyanto A, Rumiyanti L, et al. Effect of sintering temperature on the structural and physical properties of forsterite using amorphous rice husk silica as refractory precursors. J Aust Ceram Soc. 2020;56(2):433–440.
   Web of Science ®Google Scholar
• Zheng W, Wu J, Chen M, et al. Improved mechanical properties of SiC fiber reinforced silica-based ceramic cores fabricated by stereolithography. J Mater Sci Technol. 2022;116. 161–168.
   Web of Science ®Google Scholar
• Zheng W, Wu JM, Chen S, et al. Improved mechanical properties of SiB reinforced silica-based ceramic cores fabricated by 3D stereolithography printing. J Ceramics Int. 2022;48(15):21110–21117.
   Web of Science ®Google Scholar
• Jurgelane I, Buss A, Putnina M, et al. Effect of sintering temperature on sorption properties and compressive strength of calcium phosphate ceramic granules. Mater Lett. 2021;282:128858.
   Web of Science ®Google Scholar
• Kumar S, Supriya S, Pradhan LK, et al. Grain size effect on magnetic and dielectric properties of barium hexaferrite (BHF). Physica B. 2020; 579: 411908.
   Web of Science ®Google Scholar
• Chomyen P, Potong R, Rianyoi R, et al. Microstructure, dielectric and piezoelectric properties of 0–3 lead free barium zirconate titanate ceramic-Portland fly ash cement composites. Ceram Int. 2018;44(1):76–82.
   Web of Science ®Google Scholar
• Khattab RM, Abo-Almaged HH, Sadek HEH. Effects of some extracted oxides on silica fume waste for mullite preparation: physical, mechanical, optical, magnetic, and dielectric properties. Mater Chem Phys. 2022;281(February):125880.
   Google Scholar
• Munidepalli VR, Feng L, Lin W, et al. Effect of grain size on dielectric and ferroelectric properties of nanostructured Ba0.8 Sr0.2 TiO3 ceramics. J Adv Ceram. 2015;2015:46–53.
   Google Scholar
• Ballas RG. The Piezoelectric Effect - An Indispensable Solid State Effect for Contemporary Actuator and Sensor Technologies. IOP Conference Series: Earth and Environmental Science, Chengdu, China. 2021; 1775.
   Google Scholar
• Williamson BJ, Pastiroff S, Cressey G. Piezoelectric properties of quartz and cristobalite airborne particulates as a cause of adverse health effects. Atmospheric Environment. 2001;35(20):3539–3542.
   Web of Science ®Google Scholar
• Li S, Liu J, Guo T, et al. Piezoelectricity and flexoelectricity of sodium bismuth titanate-based ceramics. Ceram Int. 2020;46(2):2049–2054.
   Web of Science ®Google Scholar
• Jain A, Panwar AK, Jha AK, et al. Influence of milling duration on microstructural, electrical, ferroelectric and piezoelectric properties of Ba0.9Sr0.1Zr0.04Ti0.96O3 ceramic. Ceramics International. 2016;42. 18771–18778.
   Web of Science ®Google Scholar