Exploration on high performance polyamide 1010/polyurethane blends filled with functional graphene nanoplatelet: physical properties and technical application

References

• A. Kausar. Membranes of polycarbonate/poly (styrene-co-allyl alcohol) reinforced with nano-zeolite-based filler for gas separation. J. Chin. Adv. Mater. Soc, 2017, 5, 3–46.
   Google Scholar
• P. Swapna, Y. S. Rao. Fabrication and characterization of semiconducting single-walled carbon nanotube-based bulk hetero junction organic solar cell using spin coating technique. J. Chin. Adv. Mater. Soc, 2015, 3, 161–169.
   Google Scholar
• J. Chen, Y. Zhang, J. Chang, L. Cheng, S. Cao. Recent advances in silica-based biosensors: a review. J. Chin. Adv. Mater. Soc, 2015, 3, 257–269.
   Google Scholar
• P. M. Kharade, S. G. Chavan, S. S. Mane, P. B. Joshi, D. J. Salunkhe. Synthesis and characterization of galvanostatically deposited Cr2O3, Mn3O4, Cr2O3/Mn3O4 layered composite thin film for supercapacitor application. J. Chin. Adv. Mater. Soc, 2016, 4, 1–12.
   Google Scholar
• R. Shah, A. Kausar, B. Muhammad, S. Shah, Progression from graphene and graphene oxide to high performance polymer-based nanocomposite: a review. Polym-Plast. Technol. Eng, 2015, 54, 173–183.
   Web of Science ®Google Scholar
• A. Kausar, A. Ur Rahman. Functional graphene nanoplatelet reinforced epoxy resin and polystyrene-based block copolymer nanocomposite. Fullerenes Nanotub. Carb. Nanostruct, 2016, 24, 235–242.
   Web of Science ®Google Scholar
• I. Mutlay, L. B. Tudoran. Percolation behavior of electrically conductive graphene nanoplatelets/polymer nanocomposites: theory and experiment. Fullerenes Nanotub. Carb. Nanostruct, 2014, 22, 413–433.
   Web of Science ®Google Scholar
• F. Wang, L. T. Drzal, Y. Qin, Z. Huang. Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites. J. Mater. Sci, 2015, 50, 1082–1093.
   Web of Science ®Google Scholar
• P. C. Ma, N. A. Siddiqui, G. Marom, J. K. Kim. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review. Compos. Part A: Appl. Sci. Manuf, 2010, 41, 1345–1367.
   Web of Science ®Google Scholar
• L. J. Cui, Y. B. Wang, W. J. Xiu, W. Y. Wang, L. H. Xu, X. B. Xu, Y. Meng, L. Y. Li, J. Gao, L. T. Chen, H. Z. Geng. Effect of functionalization of multi-walled carbon nanotube on the curing behavior and mechanical property of multi-walled carbon nanotube/epoxy composites. Mater. Des, 2013, 49, 279–284.
   Web of Science ®Google Scholar
• Z. Anwar, A. Kausar, L. A. Khan, B. Muhammad. Modified graphene nanoplatelet and epoxy/block copolymer-based nanocomposite: physical characteristic and EMI shielding studies. Nanocomposites, 2016, 2, 141–151.
   Web of Science ®Google Scholar
• C. E. Carraher Jr, A. Morrison, M. R. Roner, A. Moric-Johnson, M. H. Al-Huniti, L. Miller. Metallocene-containing polyesters from reaction of 3, 5-pyridinedicarboxylic acid and metallocene dihalides and their preliminary ability to inhibit cancer cell growth. J. Chin. Adv. Mater. Soc, 2015, 3, 310–327.
   Google Scholar
• L. Ma, H. Niu, J. Cai, P. Zhao, C. Wang, Y. Lian, X. Bai, W. Wang. Optical, electrochemical, photoelectrochemical and electrochromic properties of polyamide/graphene oxide with various feed ratios of polyamide to graphite oxide. J. Mater. Chem. C, 2014, 2, 2272–2282.
   Web of Science ®Google Scholar
• D. Zheng, G. Tang, H. B. Zhang, Z. Z. Yu, F. Yavari, N. Koratkar, S. H. Lim, M. W. Lee. In situ thermal reduction of graphene oxide for high electrical conductivity and low percolation threshold in polyamide 6 nanocomposites. Compos. Sci. Technol, 2012, 72, 284–289.
   Web of Science ®Google Scholar
• Z. Mo, Q. Meng, J. Feng, H. Zhang, D. Chen. Crystal structure and thermodynamic parameters of Nylon-1010. Polym. Int, 1993, 32, 53–60.
   Web of Science ®Google Scholar
• W. Li, J. Liu, C. Hao, K. Jiang, D. Xu, D. Wang. Interaction of thermoplastic polyurethane with polyamide 1212 and its influence on the thermal and mechanical properties of TPU/PA1212 blends. Polym. Eng. Sci, 2008, 48, 249–256.
   Web of Science ®Google Scholar
• S. L. Zhang, G. B. Wang, Z. H. Jiang, D. Wang, R. T. Ma, Z. W. Wu. Impact properties, phase structure, compatibility, and fracture morphology of polyamide-1010/thermoplastic poly (ester urethane) elastomer blends. J. Polym. Sci. B: Polym. Phys, 2005, 43, 1177–1185.
   Web of Science ®Google Scholar
• Z. Lu, A. Wu, X. Ou, S. Zhang, J. Niu, S. Ji, Y. Ling. Enhanced anti-aging and mechanical properties of polyamide 1010 by sol-hydrothermal synthetic titanium dioxide-coated kaolinite addition. J. Alloys Compd, 2017, 693, 381–388.
   Web of Science ®Google Scholar
• H. Zeng, C. Gao, Y. Wang, P. C. Watts, H. Kong, X. Cui, D, Yan. In situ polymerization approach to multiwalled carbon nanotubes-reinforced nylon 1010 composites: mechanical properties and crystallization behavior. Polymer, 2006, 47, 113–122.
   Web of Science ®Google Scholar
• L. Sangroniz, J. K. Palacios, M. Fernández, J. I. Eguiazabal, A. Santamaria, A. J. Müller. Linear and non-linear rheological behavior of polypropylene/polyamide blends modified with a compatibilizer agent and nanosilica and its relationship with the morphology. Eur. Polym. J, 2016, 83, 10–21.
   Web of Science ®Google Scholar
• S. Nazemidashtarjandi, S. A. Mousavi, D. Bastani. Preparation and characterization of polycarbonate/thermoplastic polyurethane blend membranes for wastewater filtration. J. Water Process Eng, 2017, 16, 170–182.
   Google Scholar
• Y. Nishitani, J. Mukaida, T. Yamanaka, T. Kajiyama, T. Kitano. ( Eds: C. H. Holzer M. Payer), AIP conference proceedings. AIP Publishing, 2016, Chapter-1779, 060004.
   Google Scholar
• D. Yan, H. B. Zhang, Y. Jia, J. Hu, X. Y. Qi, Z. Zhang, Z. Z. Yu. Improved electrical conductivity of polyamide 12/graphene nanocomposites with maleated polyethylene-octene rubber prepared by melt compounding. ACS Appl. Mater. Interface, 2012, 4, 4740–4745.
   PubMed Web of Science ®Google Scholar
• K. N. Kudin, B. Ozbas, H. C. Schniepp, R. K. Prud'Homme, I. A. Aksay, R. Car. Raman spectra of graphite oxide and functionalized graphene sheets. Nano Lett, 2008, 8, 36–41.
   PubMed Web of Science ®Google Scholar
• S. Yousef, A. Visco, G. Galtieri, D. Nocita, C. Espro. Wear behaviour of UHMWPE reinforced by carbon nanofiller and paraffin oil for joint replacement. Mater. Sci. Engineer. C, 2017, 73, 234–244.
   PubMed Web of Science ®Google Scholar
• J.-Y. Kim, J.-Y. Song, J.-E. Lee, S.-K. Park. Rheological properties and microstructures of Carbopol gel network system. Colloid Polym. Sci, 2003, 281, 614–623.
   Web of Science ®Google Scholar
• N. C. BeckTan, S. K. Tai, R. M. Bribert. Morphology control and interfacial reinforcement in reactive polystyrene/amorphous polyamide blends. Polymer, 1996, 37, 3509–3519.
   Web of Science ®Google Scholar
• J. Q. Wang, Z. D. Han. The combustion behavior of polyacrylate ester/graphite oxide composites. Polym. Adv. Technol, 2006, 17, 335–340.
   Web of Science ®Google Scholar
• A. A. Nikiforov, N. A. Okhotina, I. Z. Fayzullin, S. I. Volfson, R. Rinberg, L. Kroll. ( Eds: E. S. N. A. Gorkunov V. E. Panin S. Ramasubbu), AIP conference proceedings. AIP Publishing, 2016, Chapter-1785, 030018.
   Google Scholar
• C. H. Hong, Y. B. Lee, J. W. Bae, J. Y. Jho, B. U. Nam, T. W. Hwang. Preparation and mechanical properties of polypropylene/clay nanocomposites for automotive parts application. J. Appl. Polym. Sci, 2005, 98, 427–433.
   Web of Science ®Google Scholar