72
Views
5
CrossRef citations to date
0
Altmetric
Articles

Developing an economic production quantity model with scrap, rework and backordering under vendor-managed inventory policy

, &

References

  • Savaşaneril S, Erkip N. An analysis of manufacturer benefits under vendor-managed systems. IIE Trans. 2010;42:455–477.10.1080/07408170903459968
  • van der Vlist PVD, Kuik R, Verheijen B. Note on supply chain integration in vendor-managed inventory. Decis Support Syst. 2007;44:360–365.10.1016/j.dss.2007.03.003
  • Song DP, Dinwoodie J. Quantifying the effectiveness of VMI and integrated inventory management in a supply chain with uncertain lead-times and uncertain demands. Prod Plan Control. 2008;19:590–600.
  • Yu HS, Zeng AZ, Zhao LD. Analyzing the evolutionary stability of the vendor-managed inventory supply chains. Comput Ind Eng. 2009;56:274–282.
  • Kiesm GP, Broekmeulen RACM. The benefit of VMI strategies in a stochastic multi-product serial two echelon system. Comput Oper Res. 2010;37:406–416.
  • Darwish MA, Odah OM. Vendor managed inventory model for single-vendor multi-retailer supply chains. Eur J Oper Res. 2010;204:473–484.10.1016/j.ejor.2009.11.023
  • Gavirneni S, Kapuscinski R, Tayur S. Value of information in capacitated supply chains. Manage Sci. 1999;45:16–24.10.1287/mnsc.45.1.16
  • Lau JSK, Huang GQ, Mak KL. Impact of information sharing on inventory replenishment in divergent supply chains. Int J Prod Res. 2004;42:919–941.10.1080/00207540310001628911
  • Croson R, Donohue K. Upstream versus downstream information and its impact on the bullwhip effect. Sys Dyn Rev. 2005;21:249–260.10.1002/(ISSN)1099-1727
  • Zhang C, Zhang C. Design and simulation of demand information sharing in a supply chain. Simul Model Pract Theory. 2007;15:32–46.
  • Zhou H, Benton WC Jr. Supply chain practice and information sharing. J Oper Manage. 2007;25:1348–1365.10.1016/j.jom.2007.01.009
  • Lee CC, Chu WHJ. Who should control inventory in a supply chain. Eur J Oper Res. 2005;164:158–172.10.1016/j.ejor.2003.11.009
  • Achabal DD, McIntyre SH, Smith SA, et al. A decision support system for vendor managed inventory. J Retail. 2000;76:430–454.10.1016/S0022-4359(00)00037-3
  • Yao Y, Evers PT, Dresner ME. Supply chain integration in vendor-managed inventory. Decis Support Sys. 2007;43:663–674.10.1016/j.dss.2005.05.021
  • Angulo A, Nachtmann H, Waller MA. Supply chain information sharing in a vendor managed inventory partnership. J Bus Logistics. 2004;25:101–120.10.1002/jbl.2004.25.issue-1
  • Pasandideh SHR, AkhavanNiaki ST, RoozbehNia A. An investigation of vendor-managed inventory application in supply chain: the EOQ model with shortage. Int J Adv Manuf Technol. 2010;49:329–339.10.1007/s00170-009-2364-5
  • Chiu SW, Gong DC, Wee HM. Effects of random defective rate and imperfect rework process on economic production quantity model. Japan J Ind Appl Math. 2004;21:375–389.10.1007/BF03167589
  • Porteus EL. Optimal lot sizing, process quality improvement and setup cost reduction. Oper Res. 1986;34:137–144.10.1287/opre.34.1.137
  • Rosenblatt MJ, Lee HL. Economic production cycles with imperfect production process. IIE Trans. 1986;18:48–55.10.1080/07408178608975329
  • Schwaller RL. EOQ under inspection costs. Prod Inventory Manag. 1988;29:22–35.
  • Salameh MK, Jaber MY. Economic production quantity model for items with imperfect quality. Int J Prod Econ. 2000;64:59–64.10.1016/S0925-5273(99)00044-4
  • Cardenas-Barron LE. Observation on: economic production quantity model for items with imperfect quality. Int J of Prod Econ. 2000;64:59–64.
  • Papachristos S, Konstantaras I. Economic ordering quantity models for items with imperfect quality. Int J Prod Econ. 2006;100:148–154.10.1016/j.ijpe.2004.11.004
  • Goyal SK, Cardenas-Barron LE. Note on: economic production quantity model for items with imperfect quality–a practical approach. Int J Prod Econ. 2002;77:85–87.10.1016/S0925-5273(01)00203-1
  • Chiu YP. Determining the optimal lot size for the finite production model with random defective rate, the rework process, and backlogging. Eng Optim. 2003;35:427–437.10.1080/03052150310001597783
  • Jamal AMM, Sarker BR, Mondal S. Optimal manufacturing batch size with rework process at a single-stage production system. Comput Indust Eng. 2004;47:77–89.
  • Cardenas-Barron LE. On optimal manufacturing batch size with rework process at single-stage production system. Comput Indust Eng. 2007;53:196–198.
  • Cardenas-Barron LE. Optimal manufacturing batch size with rework in a single-stage production system - A simple derivation. Comput Indust Eng. 2008;55:758–765.
  • Cardenas-Barron LE. On optimal batch sizing in a multi-stage production system with rework consideration. Eur J Oper Res. 2009;196:1238–1244.10.1016/j.ejor.2008.04.015
  • Haji R, Haji B. Optimal batch production for a single machine system with accumulated defectives and random rate of rework. J Ind Sys Eng. 2010;3:243–256.
  • Zipkin PH. Foundations of inventory management. Boston: McGraw-Hill Co. Inc; 2000.
  • Rardin RL. Optimization in operations research. New York: Prentice-Hall, Incs; 1998.
  • Yu Y, Hong Z, Zhang L, et al Optimal selection of retailers for a manufacturing vendor in a vendor managed inventory system. Eur J Oper Res. 2013;225:273–284.
  • Yu Y, Wang Z, Liang L. A vendor managed inventory supply chain with deteriorating raw materials and products. Int J Prod Econ. 2012;136:266–274.10.1016/j.ijpe.2011.11.029
  • Lee S, Kim D. An optimal policy for a single-vendor single-buyer integrated production–distribution model with both deteriorating and defective items. Int J Prod Econ. 2014;147:161–170.10.1016/j.ijpe.2013.09.011
  • Khan M, Jaber MY, Zanoni S. Vendor Managed Inventory with Consignment Stock Agreement for a Supply Chain with Defective Items. Appl Math Model. 2016;40(15–16):7102–7114.
  • Hosseini Rad R, Razmi J, Sangari MS, et al. Optimizing an integrated vendor-managed inventory system for a single vendor two-buyer supply chain with determining weighting factor for vendor’s ordering cost. Int J Prod Econ. 2014;153:295–308.
  • Ekren BY, Ornek MA. Determining optimum (s, S) levels of floor stock items in a paint production environment. Simul Model Pract Theory. 2015;57:133–141.10.1016/j.simpat.2015.06.009
  • Shao H, Li Y, Zhao D. An optimal dicisional model in two-echelon supply chain. Procedia Eng. 2011;15:4282–4286.10.1016/j.proeng.2011.08.803
  • Huynh CH, Pan W. Operational strategies for supplier and retailer with risk preference under VMI contract. Int J Prod Econ. 2015;169:413–421.10.1016/j.ijpe.2015.07.026
  • Kristianto Y, Helo P, Jiao JR, et al. Adaptive fuzzy vendor managed inventory control for mitigating the Bullwhip effect in supply chains. Eur J Oper Res. 2012;216:346–355.10.1016/j.ejor.2011.07.051
  • Almehdawe E, Mantin B. Vendor managed inventory with a capacitated manufacturer and multiple retailers: Retailer versus manufacturer leadership. Int J Prod Econ. 2010;128:292–302.10.1016/j.ijpe.2010.07.029
  • Taleizadeh AA, Moghadasi H, Niaki STA, et al. An EOQ-joint replenishment policy to supply expensive imported raw materials with payment in advance. J Appl Sci. 2009;8:4263–4273.
  • Taleizadeh AA, Widyadana GA, Wee HM, et al. Multi products single machine economic production quantity model with multiple batch size. Int J Ind Eng Comput. 2011;2(2):213–224.10.5267/j.ijiec
  • Taleizadeh AA, Cárdenas-Barrón LE, Biabani J, et al. Multi products single machine EPQ model with immediate rework process. Int J Ind Eng Comput. 2012;3(2):93–102.10.5267/j.ijiec.2011.09.001
  • Taleizadeh AA, Najafi AA, Niaki STA. Multi product EPQ model with scraped items and limited production capacity. Int J Sci Technol (Scientia Iranica) Trans E. 2010; 17 (1): 58-69.
  • Taleizadeh AA, Niaki STA, Najafi AA. Multi product single machine production system with stochastic scraped production rate, partial back ordering and service level constraint. J Comput Appl Math. 2010;233(8):1834–1849.10.1016/j.cam.2009.09.021
  • Taleizadeh AA, Niaki STA, Aryanezhad MB, et al. A genetic algorithm to optimize multi-product multi-constraint inventory control systems with stochastic replenishments and discount. Int J Adv Manuf Technol. 2010;51:311–323.10.1007/s00170-010-2604-8
  • Taleizadeh AA, Niaki STA, Aryanezhad MB. Replenish-up-to multi chance-constraint inventory control system with stochastic period lengths and total discount under fuzzy purchasing price and holding costs. Int J Sys Sci. 2010;41(10):1187–1200.10.1080/00207720903171761
  • Taleizadeh AA, Wee HM, Sadjadi SJ. Multi-product production quantity model with repair failure and partial back-ordering. Comput Ind Eng. 2010;59(1):45–54.
  • Taleizadeh AA, Barzinpour F, Wee HM. Meta-heuristic algorithms to solve the fuzzy single period problem. Math Comput Modell. 2011;54:1273–1285.10.1016/j.mcm.2011.03.038
  • Taleizadeh AA, Pentico DW, Aryanezhad MB, et al. An economic order quantity model with partial backordering and a special sale price. Eur J Oper Res. 2012;221:571–583.10.1016/j.ejor.2012.03.032
  • Taleizadeh AA, Niaki ST, Aryanezhad MB, et al. A hybrid method of fuzzy simulation and genetic algorithm to optimize multi-product single-constraint inventory control systems with stochastic replenishments and fuzzy-demand. Inf Sci. 2013;220:425–441.10.1016/j.ins.2012.07.027
  • Taleizadeh AA, Pentico DW. An economic order quantity model with known price increase and partial backordering. Eur J Oper Res. 2013;228:516–525.10.1016/j.ejor.2013.02.014
  • Taleizadeh AA, Mohammadi B, Cárdenas-Barrón LE, et al. An EOQ model for perishable product with special sale and shortage. Int J Prod Econ. 2013;145:318–338.10.1016/j.ijpe.2013.05.001
  • Taleizadeh AA, Pentico DW, Jabalameli MS, et al. An economic order quantity model with multiple partial prepayments and partial backordering. Math Comput Modell. 2013;57:311–323.10.1016/j.mcm.2012.07.002

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.