A numerical investigation on heat transfer enhancement and the flow characteristics in a new type plate heat exchanger using helical flow duct

References

• Andrade, C. R., & Zaparoli, E. L. (2001). Effects of temperature-dependent viscosity on fully developed laminar forced convection in a curved duct. International Communications in Heat and Mass Transfer, 28(2), 211–220.10.1016/S0735-1933(01)00228-7
   Web of Science ®Google Scholar
• Bejan, A., & Kraus, A. D. (2003). Heat transfer handbook. New York, NY: John Wiley & Sons.
   Google Scholar
• Bhanvase, B. A., Sayankar, S. D., Kapre, A., Fule, P. J., & Sonawane, S. H. (2018). Experimental investigation on intensified convective heat transfer coefficient of water based PANI nanofluid in vertical helical coiled heat exchanger. Applied Thermal Engineering, 128, 134–140.10.1016/j.applthermaleng.2017.09.009
   Web of Science ®Google Scholar
• Bizhaem, H. K., & Abbassi, A. (2017). Numerical study on heat transfer and entropy generation of developing laminar nanofluid flow in helical tube using two-phase mixture model. Advanced Powder Technology, 28(9), 2110–2125.10.1016/j.apt.2017.05.018
   Web of Science ®Google Scholar
• Cancan, Z., Dingbiao, W., Sa, X., Yong, H., & Xu, P. (2017). Numerical investigation of heat transfer and pressure drop in helically coiled tube with spherical corrugation. International Journal of Heat and Mass Transfer, 113, 332–341.
   Web of Science ®Google Scholar
• Datta, A. K., Yanase, S., Kouchi, T., & Shatat, M. M. E. (2017). Laminar forced convective heat transfer in helical pipe flow. International Journal of Thermal Sciences, 120, 41–49.10.1016/j.ijthermalsci.2017.05.026
   Web of Science ®Google Scholar
• Dewatwal, J. (2009). Design of compact plate fine heat exchanger (BTech thesis). Rourkela, India: Department of Mechanical Engineering, National Institute of Technology. Retrieved from http://ethesis.nitrkl.ac.in/297/
   Google Scholar
• Eswaraiah, D., & Sarada, S. N. (2012). Numerical investigations on augmentation of heat transfer in oil coolers. International Journal of Engineering Research & Technology (IJERT), 1(7), 1–9.
   Google Scholar
• Fule, P. J., Bhanvase, B. A., & Sonawane, S. H. (2017). Experimental investigation of heat transfer enhancement in helical coil heat exchangers using water based CuO nanofluid. Advanced Powder Technology, 28(9), 2288–2294.10.1016/j.apt.2017.06.010
   Web of Science ®Google Scholar
• Guo, L., Feng, Z., & Chen, X. (2001). An experimental investigation of the frictional pressure drop of steam–water two-phase flow in helical coils. International Journal of Heat and Mass Transfer, 44(14), 2601–2610.10.1016/S0017-9310(00)00312-4
   Web of Science ®Google Scholar
• Mazumdar, S., & Singh, R. (2007). CFD studies on flow through compact heat exchangers (BTech thesis). Rourkela, India: Department of Mechanical Engineering, National Institute of Technology. Retrieved from http://ethesis.nitrkl.ac.in/4275/
   Google Scholar
• Mohammed, H. A., Hasan, H. A., & Wahid, M. A. (2013). Heat transfer enhancement of nanofluids in a double pipe heat exchanger with louvered strip inserts. International Communications in Heat and Mass Transfer, 40, 36–46.10.1016/j.icheatmasstransfer.2012.10.023
   Web of Science ®Google Scholar
• Naik, B. A. K., & Vinod, A. V. (2018). Heat transfer enhancement using non-Newtonian nanofluids in a shell and helical coil heat exchanger. Experimental Thermal and Fluid Science, 90, 132–142.10.1016/j.expthermflusci.2017.09.013
   Web of Science ®Google Scholar
• Pan, C., Zhou, Y., & Wang, J. (2014). CFD study of heat transfer for oscillating flow in helically coiled tube heat-exchanger. Computers and Chemical Engineering, 69, 59–65.10.1016/j.compchemeng.2014.07.001
   Web of Science ®Google Scholar
• Peng, H., & Ling, X. (2008). Numerical modeling and experimental verification of flow and heat transfer over serrated fins at low Reynolds number. Experimental Thermal and Fluid Science, 32(5), 1039–1048.10.1016/j.expthermflusci.2007.11.021
   Web of Science ®Google Scholar
• Piper, M., Olenberg, A., Tran, J. M., & Kenig, E. Y. (2015). Determination of the geometric design parameters of pillow-plate heat exchangers. Applied Thermal Engineering, 91, 1168–1175.10.1016/j.applthermaleng.2015.08.097
   Web of Science ®Google Scholar
• Sharifi, K., Sabeti, M., Rafiei, M., Mohammadi, A. H., & Shirazi, L. (2018). Computational fluid dynamics (CFD) technique to study the effects of helical wire inserts on heat transfer and pressure drop in a double pipe heat exchanger. Applied Thermal Engineering, 128, 898–910.10.1016/j.applthermaleng.2017.08.146
   Web of Science ®Google Scholar
• Shatat, M. M. E. (2010). Influence of micro-bubbles on the heat transfer and pressure drop characteristics of water flow in straight and helical pipes ( PhD thesis). Okayama: Okayama University.
   Google Scholar
• Sleiti, A. K., & Naimaster, E. J. (2009, November 13–19). Heat transfer and pressure drop through rectangular helical ducts. ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE2009), Volume 9: Heat Transfer, Fluid Flows, and Thermal Systems, Parts A, B and C, Paper No. IMECE2009-12316, 133–139, Lake Buena Vista, Florida, USA.
   Google Scholar
• Song, X., Dong, G., Gao, F., Diao, X., Zheng, L., & Zhou, F. (2014). A numerical study of parabolic trough receiver with nonuniform heat flux and helical screw-tape inserts. Energy, 77(1), 771–782.10.1016/j.energy.2014.09.049
   Web of Science ®Google Scholar
• Tapre, R. W., & Kaware, Dr., J. P. (2015). Review on heat transfer in spiral heat exchanger. International Journal of Scientific and Research Publications (IJSRP), 5(6), 5p. Retrieved from http://www.ijsrp.org/research-paper-0615.php?rp=P424181
   Google Scholar
• Villanueva, H. H. S., & de Mello, P. E. B. (2015). Heat transfer and pressure drop correlations for finned plate ceramic heat exchangers. Energy, 88, 118–125.10.1016/j.energy.2015.04.017
   Web of Science ®Google Scholar
• Wang, C., Liu, S., Wu, J., & Li, Z. (2014). Effects of temperature-dependent viscosity on fluid flow and heat transfer in a helical rectangular duct with a finite pitch. Brazilian Journal of Chemical Engineering, 31(3), 787–797.10.1590/0104-6632.20140313s00002676
   Web of Science ®Google Scholar
• Xing, Y., Zhong, F., & Zhang, X. (2014). Numerical study of turbulent flow and convective heat transfer characteristics in helical rectangular ducts. ASME Journal of Heat Transfer, 136 (12), Paper No. (121701).
   PubMed Web of Science ®Google Scholar
• Xinyi, T., & Dongsheng, Z. (2012). Experimental and numerical study on heat transfer enhancement of a rectangular channel with discontinuous crossed ribs and grooves. Chinese Journal of Chemical Engineering, 20(2), 220–230.
   Web of Science ®Google Scholar
• Yanase, S., Mondal, R. N., & Kaga, Y. (2005). Numerical study of non-isothermal flow with convective heat transfer in a curved rectangular duct. International Journal of Thermal Sciences, 44(11), 1047–1060.10.1016/j.ijthermalsci.2005.03.013
   Web of Science ®Google Scholar
• Yin, H., & Ooka, R. (2015). Shape optimization of water-to-water plate-fin heat exchanger using computational fluid dynamics and genetic algorithm. Applied Thermal Engineering, 80, 310–318.10.1016/j.applthermaleng.2015.01.068
   Web of Science ®Google Scholar
• Yin, J. L., Wang, D. Z., Cheng, H., & Gu, W. G. (2013). Assessment of RANS to predict flows with large streamline curvature. Materials Science and Engineering, 52, 1–6.
   Google Scholar
• Zhang, J., He, Y., & Tao, W. (2009). 3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles – Part I: Numerical model and results of whole heat exchanger with middle-overlapped helical baffles. International Journal of Heat and Mass Transfer, 52(23–24), 5371–5380.10.1016/j.ijheatmasstransfer.2009.07.006
   Web of Science ®Google Scholar