References
- Abu Jadayil, W. (2008). Relative fatigue life estimation of cylindrical hollow rollers in general pure rolling contact. Journal of Tribotest, Wiley InterScience , 14, 27–42. doi:10.1002/(ISSN)1557-685X
- Abu Jadayil, W. (2010). Revision of the recent heterogeneous solid object modeling techniques. Jordan Journal of Mechanical and Industrial Engineering , 4(6), 779–788.
- Abu Jadayil, W. (2011a). Experimental investigation of solidification time effects on surface and subsurface aluminum casting defects. International Review of Mechanical Engineering , 5(4), 569–576.
- Abu Jadayil, W. (2011b). Studying the effects of varying the pouring rate on the casting defects using nondestructive testing techniques. Jordan Journal of Mechanical and Industrial Engineering , 5(6), 521–526.
- Abu Jadayil, W. , & Alnaber, M. (2013). Assessment of fatigue life of Ni-Ti samples prepared by different techniques. Applied Mechanics and Materials , 477–478, 1264–1268. doi:10.4028/www.scientific.net/AMM.477-478
- Abu Jadayil, W. , & Flugrad, D. (2007). Fatigue life investigation of solid and hollow rollers under pure normal loading. Journal of Tribotest, Wiley InterScience , 13, 165–181. doi:10.1002/(ISSN)1557-685X
- Abu Jadayil, W. , & Jaber, N. (2009). Numerical prediction of optimum hollowness and material of hollow rollers under combined loading. Journal of Materials and Design , 31(3), 1490–1496. doi:10.1016/j.matdes.2009.08.024
- Abu Jadayil, W. , & Khraisat, W. (2010). Predicting the optimum hollowness of normally loaded cylindrical rollers using finite element analysis. Journal of Materials Science and Technology , 26(2), 176–183. doi:10.1179/174328408X389724
- Abu Jadayil, W. , & Mohsen, M. (2011). Experimental investigation of self actuating traction drives with solid and hollow rollers. International Review of Mechanical Engineering , 5(4), 637–645.
- Altino, J. R. (2002). Effect of heat input on plastic deformation of undermatched welds. Journal of Materials Processing Technology , 128, 240–249. doi:10.1016/S0924-0136(02)00457-0
- Amirthalingam, M. , Hermans, M. , & Richardson, I. (2010). Quantitative analysis of microstructural constituents in welded Transformation Induced Plasticity (TRIP) steels. Metallurgical and Materials Transactions , 41A, 431–439. doi:10.1007/s11661-009-0117-6
- Amrithalingam, M. , Hermans, M. , & Richardson, I. (2009). Microstructural development during welding of silicon- and aluminum-based transformation-induced plasticity steel-inclusion and elemental partitioning analysis. Metallurgical and Materials Transactions , 40A, 901–909. doi:10.1007/s11661-008-9761-5
- Baltazar Hernandez, V. , Kuntz, M. , Khan, M. , & Zhou, Y. (2008). Influence of microstructure and weld size on the mechanical behaviour of dissimilar AHSS resistance spot welds. Science and Technology of Welding and Joining , 13, 769–776. doi:10.1179/136217108X325470
- Bhadeshia, H. , & Honeycombe, R. (2006). Steels: Microstructure and properties (3rd ed.). Oxford: Butterworth-Heinemann.
- Bodnar, R. , & Hansen, S. (1994). Effects of Austenite grain size and cooling rate on Widmanst¨atten Ferrite formation in low alloy steels. Metallurgical & Materials Transactions A , 25A, 665–675. doi:10.1007/BF02665443
- Bracke, L. , Verbeken, K. , Kestens, L. , & Penning, J. (2009). Microstructure and texture evolution during cold rolling and annealing of a high-Mn TWIP steel. Acta Materialia 57(5), 1512–1524.
- Burns, T. (2009). Weldability of a Dual-Phase-Sheet Steel by the Gas Metal Arc Welding Process ( Thesis). University of Waterloo.
- De Cooman, B. (2004). Structure-properties relationship in TRIP steels containing carbide-free bainite. Current Opinion in Solid State and Materials Science , 8, 285–303. doi:10.1016/j.cossms.2004.10.002
- Dearden, J. , & O’Neill, H. (1940, October). A guide to the selection and welding of low alloy structural steels. Transactions of the Institute of Welding , 3, 203–214.
- Dexter, R. (1997). Significance of strength undermatching of welds in structural behaviour (pp. 55–73). Geesthacht, FRG: GKSS Research Center Publications.
- Greuter, F. , & Blatter, G. (1999). Electrical properties of grain boundaries in polycrystalline compound semiconductors. Semiconductor Science and Technology , 5(2), 111. doi:10.1088/0268-1242/5/2/001
- Han, T. , Park, S. , Kim, K. , Kang, C. , Woo, I. , & Lee, J. (2005). CO2 laser welding of 800 MPa class TRIP steel. International Iron and Steel Institute in Japan , 45(1), 60–65. doi:10.2355/isijinternational.45.60
- International Iron and Steel Institute . 2002. Project reports on UltraLight Steel Auto Body (ULSAB), UltraLight Steel Auto Closures (ULSAC), and UltraLight Steel Auto Body-Advanced Vehicle Concepts (ULSAB – AVC).
- Jones, S. , & Bhadeshia, H. (1997a). Kinetics of the simultaneous decomposition of Austenite into several transformation products. Acta Materialia , 45, 2911–2920. doi:10.1016/S1359-6454(96)00392-8
- Jones, S. , & Bhadeshia, H. (1997b). Competitive formation of inter and intragranularly nucleated Ferrite. Metallurgical & Materials Transactions A , 28A, 2005–2103. doi:10.1007/s11661-997-0157-8
- Keeler, S. , & Kimchi, M. (2014). Advanced high strength steels Application Guidelines, version 5, world auto steel . USA: Advanced Auto Steels.
- Khan, M. , Kuntz, M. , & Zhou, Y. (2008). Effect of weld microstructure on the static and impact performance of resistance spot welded (RSW) joints in advanced high strength steels (AHSS). Science and Technology of Welding and Joining , 13, 294–304. doi:10.1179/174329308X271733
- Khraisat, W. , & Abu Jadayil, W. (2010). Strengthening aluminum scrap by alloying with iron. Jordan Journal of Mechanical and Industrial Engineering , 4(3), 372–377.
- Khraisat, W. , Borgstrom, H. , Nyborg, L. , & Abu Jadayil, W. (2009). Optimising grey iron powder compacts. Journal of Powder Metallurgy , 52(4), 291–297. doi:10.1179/003258908X370168
- Klein, S. , Weber, S. , & Theisen, W. (2015). Effect of heat treatment on phase structure and thermal conductivity of a copper-infiltrated steel. Journal of Materials Science , 50(10), 3586–3596. doi:10.1007/s10853-015-8919-y
- Kou, S. (2003). Welding metallurgy (pp. 233–273). USA: John Wiley.
- Mrňa, L. , Kopecký, L. , Němeček, T. , Mikmeková, S. , & Dohnal, I. (2013). Laser welding of domex steel and heterogeneous weld with DC01 . Presented in 22nd International Conference on Metallurgy and Materials, ay 15–17, 2013, Hotel Voronez I, Brno, Czech Republic, EU.
- Murray, G. (1997). Handbook of materials selection for engineering applications (pp. 275–280). NY: Marcel Dekker Inc.
- Prasad, K. , & Dwivedi, D. (2008). Some investigations on microstructure and mechanical properties of submerged arc welded HSLA steel joints. International Journal of Advanced Manufacturing Technology , 36(5–6), 475–483. doi:10.1007/s00170-006-0855-1
- Sharma, R. , & Molian, P. (2009). Yb: YAG laser welding of TRIP780 steel with dual phase and mild steels for use in tailor welded blanks. Materials and Design , 30, 4146–4155. doi:10.1016/j.matdes.2009.04.033
- Yurioka, N. , & Kasuya, T. (1995). A chart method to determine necessary preheat in steel welding. Weld World , 35, 327–334.