References
- Badar, A. W., Buchholz, R., Lou, Y., & Ziegler, F. (2012). CFD based analysis of flow distribution in a coaxial vacuum tube solar collector with laminar flow conditions. International Journal of Energy and Environmental Engineering, 3(24), 1–20. doi:10.1186/2251-6832-3-24
- Bashar, Z. U., Wayayok, A., Amin, M. S. M., Mahadi, M. R., & Ehsan, S. D. (2015). Single seedling nursery tray : An innovative breakthrough to quality seedling raising technique for SRI transplanting machine. Research Journal of Applied Sciences, Engineering and Technology, 10(11), 1258–1265. doi:10.19026/rjaset.10.1820
- Blocken, B. (2015). Computational fluid dynamics for urban physics : Importance, scales, possibilities, limitations and ten tips and tricks towards accurate and reliable simulations. Building and Environment, 91, 219–245. doi:10.1016/j.buildenv.2015.02.015
- Buccolieri, R., Santiago, J., Rivas, E., & Saanchez, B. (2018). Review on urban tree modelling in CFD simulations. Aerodynamic, deposition and thermal effects. Urban Forestry and Urban Greening .2018(31), 212–220.
- Chen, C., Jung, S., & Yen, S. (2007). Flow distribution in the manifold of PEM fuel cell stack. Journal of Power Sources, 173, 249–263. doi:10.1016/j.jpowsour.2007.05.007
- Dizadji, N., & Sajadian, S. E. (2011). Modeling and optimization of the chamber of OWC system. Energy, 36(5), 2360–2366. doi:10.1016/j.energy.2011.01.010
- Dong, J., Xu, X., & Xu, B. (2017). CFD analysis of a novel modular manifold with multi-stage channels for uniform air distribution in a fuel cell stack. Applied Thermal Engineering, 124, 286–293. doi:10.1016/j.applthermaleng.2017.06.030
- Durner, E. F., Poling, E. B., & Maas, J. L. (2002). Plug Transplant Technology. HortTechnology, 12, 545–550. doi:10.21273/HORTTECH.12.4.545
- Fu, Y., Yuan, J., Yuan, S., Pace, G., Agostino, L., Huang, P., & Li, X. (2016). Numerical and experimental analysis of flow phenomena in a centrifugal pump operating under low flow rates. Journal of Fluids Engineering, 137, 1–12. doi:10.1115/1.4027142
- Gaikwad, B. B., & Sirohi, N. P. S. (2008). Design of a low-cost pneumatic seeder for nursery plug trays. Biosystems Engineering, 99(3), 322–329. doi:10.1016/j.biosystemseng.2007.10.017
- Hassan, J. M., Abdulwahhab, A., & Kamil, B. K. (2008). Flow distribution in manifolds. Journal of Engineering and Development, 12(4), 159–177.
- Hsu, M., Akkerman, I., & Bazilevs, Y. (2014). Finite element simulation of wind turbine aerodynamics : Validation study using NREL phase VI experiment. Wind Energy, 17, 461–481. doi:10.1002/we
- Jafar, M. H., Thamer, A. M., Wahid, S. M., & Wissam, H. A. Experimental and numerical study on the improvement of uniformity flow for three-lateral dividing manifold Jafar, M. H., Thamer, A. M., Wahid, S. M., & Wissam, H. A. (2015). World research and innovation convention on engineering and technology 2014. Malaysia: Putrajaya.
- Jiajia, Y., Yitao, L., Jinling, C., Song, Y., & Qingxi, L. (2014). Simulation analysis and match experiment on negative and positive pressures of pneumatic precision metering device for rapeseed. International Journal of Agricultural and Biological Engineering, 7(3), 1–13. doi:10.3965/j.ijabe.20140703.001
- Karayel, D., Barut, Z. B., & Özmerzi, A. (2004). Mathematical modelling of vacuum pressure on a precision seeder. Journal of Biosystems Engineering, 87(4), 437–444. doi:10.1016/j.biosystemseng.2004.01.011
- Lihong, Z., Christopher, P., & Yi, Z. (2015). CFD modeling of methane distribution at a continuous miner face with various curtain setback distances. International Journal of Mining Science and Technology, 25, 635–640. doi:10.1016/j.ijmst.2015.05.018
- Liu, C., Wang, X., & Wang, Y. (2015). Design and experimental research of a rice precision seeder for plug seedlings. ASABE Annual International, 2015.
- Mahmood, M., Bhutta, A., Hayat, N., Bashir, M. H., Khan, A. R., Ahmad, K. N., & Khan, S. (2012). CFD applications in various heat exchangers design : A review. Applied Thermal Engineering, 32, 1–12. doi:10.1016/j.applthermaleng.2011.09.001
- Nunomura, O., Kozai, T., Shinozaki, K., & Oshio, T. (2016). Seeding, seedling production and transplanting. Plant Factory ( First, pp. 223–235). Rio de Janeiro, Brazil:Elsevier.
- Pal, E., Kumar, I., Joshi, J. B., & Maheshwari, N. K. (2016). CFD simulations of shell-side flow in a shell-and-tube type heat exchanger with and without baffles. Chemical Engineering Science, 143, 314–340. doi:10.1016/j.ces.2016.01.011
- Saco, S. A., Karuppa, R. T., & Karthikeyan, P. (2016). A study on scaled up proton exchange membrane fuel cell with various fl ow channels for optimizing power output by effective water management using numerical technique. Energy, 113, 558–573. doi:10.1016/j.energy.2016.07.079
- Shahril, S. M., Quadir, G. A., Amin, N. A. M., & Anjum, I. (2017). Thermo hydraulic performance analysis of a shell-and-double concentric tube heat exchanger using CFD. International Journal of Heat and Mass Transfer, 105, 781–798. doi:10.1016/j.ijheatmasstransfer.2016.10.021
- Wei, M., Boutin, G., Fan, Y., & Luo, L. (2016). Numerical and experimental investigation on the realization of target flow distribution among parallel mini-channels. Chemical Engineering Research and Design, 3, 74–84. doi:10.1016/j.cherd.2016.06.026
- Wilberforce, T., El-hassan, Z., Khatib, F. N., Al, A., Mooney, J., Barouaji, A., … Olabi, A. (2017). Development of Bi-polar plate design of PEM fuel cell using CFD techniques. Hydrogen Energy, 2, 25663–25685. doi:10.1016/j.ijhydene.2017.08.093
- Wu, Q., Huang, B., Wang, G., & Gao, Y. (2015). Experimental and numerical investigation of hydroelastic response of a flexible hydrofoil in cavitating flow. International Journal of Multiphase Flow, 74, 19–33. doi:10.1016/j.ijmultiphaseflow.2015.03.023
- Xiaolian, L. V., Xiaorong, L. V., Wei, W., & Xiaoqiong, Z. (2016). Numerical simulation and experiment on the adsorption seeds properties of air-suction peanut seed-metering device. International Journal of Simulation: Systems, Science and Technology, 17(26), 1–6.
- Yamauchi, M., Aguilar, A. M., Vaughan, D. A., & Seshu, D. V. (1993). Rice (Oryza sativa L .) germplasm suitable for direct sowing under flooded soil surface. Euphytica Journal, 67, 177–184. doi:10.1007/BF00040619
- Zuo, Y., Ma, X., Qi, L., & Liao, X. (2011). 3-D Turbulence numerical simulation for the flow field of suction cylinder-seeder with socket-slots. International Federation for Information Processing, 344, 1–8.