Mechanical property prediction of SPS processed GNP/PLA polymer nanocomposite using artificial neural network

References

• Adesina, O. T., Sadiku, E. R., Jamiru, T., Ogunbiyi, O. F., Beneke, L. W., & Adegbola, A. T. (2019). Optimization of SPS processing parameters on the density and hardness properties of graphene reinforced polylactic acid nanocomposite. The International Journal of Advanced Manufacturing Technology, 102(9–12), 4047–17. London: Springer. doi:10.1007/s00170-019-03530-7
   Web of Science ®Google Scholar
• Akkurt, S., Ozdemir, S., Tayfur, G., & Akyol, B. (2003). The use of GA-ANNs in the modeling of compressive strength of cement mortar. Cement and Concrete Research, 33(7), 973–979. doi:10.1016/S0008-8846(03)00006-1
   Web of Science ®Google Scholar
• Al-Haik, M. S., Hussaini, M. Y., & Garmestani, H. (2006). Prediction of nonlinear viscoelastic behavior of polymeric composites using an artificial neural network. International Journal of Plasticity, 22(7), 1367–1392. doi:10.1016/j.ijplas.2005.09.002
   Web of Science ®Google Scholar
• Altarazi, S., Ammouri, M., & Hijazi, A. (2018). Artificial neural network modeling to evaluate polyvinylchloride composites’ properties. Computational Materials Science, 153, 1–9. doi:10.1016/j.commatsci.2018.06.003
   Web of Science ®Google Scholar
• Barbero, E. J. (2017). Introduction to composite materials design. Boca Raton: CRC press.
   Google Scholar
• Batakliev, T., Georgiev, V., Ivanov, E., Kotsilkova, R., Di Maio, R., Silvestre, C., & Cimmino, S. (2019). Nanoindentation analysis of 3D printed poly (lactic acid)‐based composites reinforced with graphene and multiwall carbon nanotubes. Journal of Applied Polymer Science, 136(13), 47260. doi:10.1002/app.v136.13
   Web of Science ®Google Scholar
• Bayraktar, Ö., Uzun, G., Çakiroğlu, R., & Guldas, A. (2017). Experimental study on the 3D‐printed plastic parts and predicting the mechanical properties using artificial neural networks. Polymers for Advanced Technologies, 28(8), 1044–1051. doi:10.1002/pat.v28.8
   Web of Science ®Google Scholar
• Burgaz, E., Yazici, M., Kapusuz, M., Alisir, S. H., & Ozcan, H. (2014). Prediction of thermal stability, crystallinity and thermomechanical properties of poly (ethylene oxide)/clay nanocomposites with artificial neural networks. Thermochimica Acta, 575, 159–166. doi:10.1016/j.tca.2013.10.032
   Web of Science ®Google Scholar
• Cavaliere, P. (ed.). (2019). Spark Plasma Sintering of materials: Advances in processing and applications. Switzerland: Springer. https://doi.org/10.1007/978-3-030-05327-7
   Google Scholar
• Cheung, V., & Cannons, K. (2002). An introduction to neural networks. Canada: University of Manitoba.
   Google Scholar
• El Kadi, H. (2006). Modeling the mechanical behavior of fiber-reinforced polymeric composite materials using artificial neural networks—A review. Composite Structures, 73(1), 1–23. doi:10.1016/j.compstruct.2005.01.020
   Web of Science ®Google Scholar
• German, R. M. (2010). Thermodynamics of sintering. In Zhigang Zak Fang (Ed.), Sintering of advanced materials (pp. 3–32).  Abington Hall,  Cambridge: Woodhead Publishing.
   Google Scholar
• Gui, Z., Lu, C., & Cheng, S. (2013). Comparison of the effects of commercial nucleation agents on the crystallization and melting behaviour of polylactide. Polymer Testing, 32(1), 15–21. doi:10.1016/j.polymertesting.2012.08.011
   Web of Science ®Google Scholar
• Hinton, G. E. (1992). How neural networks learn from experience. Scientific American, 267(3), 144–151. doi:10.1038/scientificamerican0992-144
   PubMed Web of Science ®Google Scholar
• Jain, A. K., Mao, J., & Mohiuddin., K. M. (1996). Artificial neural networks: A tutorial. Computer, 29(3), 31–44. doi:10.1109/2.485891
   Web of Science ®Google Scholar
• Jayabal, S., Rajamuneeswaran, S., Ramprasath, R., & Balaji, N. S. (2013). Artificial neural network modelling of mechanical properties of calcium carbonate impregnated coir-polyester composites. Transactions of the Indian Institute of Metals, 66(3), 247–255. doi:10.1007/s12666-013-0255-9
   Web of Science ®Google Scholar
• Jebawi, K. A., Sixou, B., Seguela, R., Vigier, G., & Chervin, C. (2006). Hot compaction of polyoxymethylene, part 1: Processing and mechanical evaluation. Journal of Applied Polymer Science, 102(2), 1274–1284. doi:10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Jiang, Z., Gyurova, L. A., Schlarb, A. K., Friedrich, K., & Zhang, Z. (2008). Study on friction and wear behavior of polyphenylene sulfide composites reinforced by short carbon fibers and sub-micro TiO2 particles. Composites Science and Technology, 68(3–4), 734–742. doi:10.1016/j.compscitech.2007.09.022
   Web of Science ®Google Scholar
• Jiang, Z., Zhang, Z., & Friedrich, K. (2007). Prediction on wear properties of polymer composites with artificial neural networks. Composites Science Technology, 67, 168–176. doi:10.1016/j.compscitech.2006.07.026
   Web of Science ®Google Scholar
• Kashyap, S., & Datta, D. (2015). Process parameter optimization of plastic injection molding: A review. International Journal of Plastics Technology, 19(1), 1–18. doi:10.1007/s12588-015-9115-2
   Web of Science ®Google Scholar
• Khanam, P. N., AlMaadeed, M. A., AlMaadeed, S., Kunhoth, S., Ouederni, M., Sun, D., … Mayoral, B. (2016). Optimization and prediction of mechanical and thermal properties of graphene/ LLDPE nanocomposites by using artificial neural networks. International Journal of Polymer Science, 2016, 1–16. https://doi.org/10.1155/2016/5340252
   Web of Science ®Google Scholar
• Kim, M., Jeong, J. H., Lee, J. Y., Capasso, A., Bonaccorso, F., Kang, S. H., … Lee, G. H. (2019). Electrically conducting and mechanically strong graphene–polylactic acid composites for 3D printing. ACS Applied Materials & Interfaces, 11(12), 11841–11848. doi:10.1021/acsami.9b03241
   PubMed Web of Science ®Google Scholar
• Kim., B. K. (2012). Graphene and graphene/polymer nanocomposites. Express Polymer Letters, 6(10), 772. doi:10.3144/expresspolymlett.2012.82
   Web of Science ®Google Scholar
• Lahiri, D., Dua, R., Zhang, C., de Socarraz-novoa, I., Bhat, A., Ramaswamy, S., & Agarwal., A. (2012). Graphene nanoplatelet-induced strengthening of ultrahigh molecular weight polyethylene and biocompatibility in vitro. ACS Applied Materials and Interfaces, 4(4), 2234–2241. doi:10.1021/am300244s
   PubMed Web of Science ®Google Scholar
• Mahdavi Jafari, M., Soroushian, S., & Khayati, G. R. (2017). Hardness optimization for al6061- MWCNT nanocomposite prepared by mechanical alloying using artificial neural networks and genetic algorithm. Journal of Ultrafine Grained and Nanostructured Materials, 50(1), 23–32.
   Google Scholar
• Mansour, M., Tsongas, K., & Tzetzis, D. (2019). Measurement of the mechanical and dynamic properties of 3D printed polylactic acid reinforced with graphene. Polymer-Plastics Technology and Materials, 58(11), 1234–1244. doi:10.1080/03602559.2018.1542730
   Web of Science ®Google Scholar
• Murariu, M., Dechief, A. L., Ramy-Ratiarison, R., Paint, Y., Raquez, J. M., & Dubois, P. (2015). Recent advances in production of poly (lactic acid) (PLA) nanocomposites: A versatile method to tune crystallization properties of PLA. Nanocomposites, 1(2), 71–82. doi:10.1179/2055033214Y.0000000008
   Web of Science ®Google Scholar
• Pinto, A. M., Martins, J., Moreira, J. A., Mendes, A. M., & Magalhaes, F. D. (2013). Dispersion of graphene nanoplatelets in poly(vinyl acetate) latex and effect on adhesive bond strength. Polymer International, 62(6), 928–935. doi:10.1002/pi.2013.62.issue-6
   Web of Science ®Google Scholar
• Potts, J. R., Dreyer, D. R., Bielawski, C. W., & Ruoff., R. S. (2011). Graphene-based polymer nanocomposites. Polymer, 52(1), 5–25. doi:10.1016/j.polymer.2010.11.042
   Web of Science ®Google Scholar
• Pradeep, J., Srinivasan, E., & Himavathi, S. (2012). Neural network based recognition system integrating feature extraction and classification for english handwritten. International Journal of Engineering, 25(2), 99–106. doi:10.5829/idosi.ije.2012.25.02b.03
   Google Scholar
• Prasad, G. E., Gowda, B. K., & Velmurugan, R. (2014). Prediction of properties of coir fiber reinforced composite by ANN. In G.P. Tandon., Srinivasan Arjun Tekalur.,  Carter Ralph Nancy R. Sottos., Benjamin Blaiszik (Eds.), Experimental mechanics of composite, hybrid, and multifunctional materials (Vol. 6, pp. 1–7). Cham: Springer.
   Google Scholar
• Prashantha, K., & Roger, F. (2017). Multifunctional properties of 3D printed poly (lactic acid)/graphene nanocomposites by fused deposition modeling. Journal of Macromolecular Science, Part A, 54(1), 24–29. doi:10.1080/10601325.2017.1250311
   Web of Science ®Google Scholar
• Rajak, D. K., Pagar, D. D., Kumar, R., & Pruncu, C. I. (2019). Recent progress of reinforcement materials: A comprehensive overview of composite materials. Journal of Materials Research and Technology, 8, 6354–6374. doi:10.1016/j.jmrt.2019.09.068
   Google Scholar
• Rajak, D. K., Pagar, D. D., Menezes, P. L., & Linul, E. (2019). Fiber-reinforced polymer composites: Manufacturing, properties, and applications. Polymers, 11(10), 1667. doi:10.3390/polym11101667
   PubMed Web of Science ®Google Scholar
• Rao, K. S., Varadarajan, Y. S., & Rajendra, N. (2014). Artificial neural network approach for the prediction of abrasive wear behavior of carbon fabric reinforced epoxy composite. NISCAIR-CSIR, India: NISCAIR PUBLICATIONS.
   Google Scholar
• Seyhan, A. T., Tayfur, G., Karakurt, M., & Tanogˇlu, M. (2005). Artificial neural network (ANN) prediction of compressive strength of VARTM processed polymer composites. Computational Materials Science, 34(1), 99–105. doi:10.1016/j.commatsci.2004.11.001
   Web of Science ®Google Scholar
• Sha, W., & Edwards, K. L. (2007). The use of artificial neural networks in materials science based research. Materials & Design, 28(6), 1747–1752. doi:10.1016/j.matdes.2007.02.009
   Web of Science ®Google Scholar
• Shen, C., Wang, L., & Li, Q. (2007). Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method. Journal of Materials Processing Technology, 183(2–3), 412–418. doi:10.1016/j.jmatprotec.2006.10.036
   Web of Science ®Google Scholar
• Suárez, M., Fernández, A., Menéndez, J. L., Torrecillas, R., Kessel, H. U., Hennicke, J., … Kessel, T. (2013). Challenges and opportunities for spark plasma sintering: A key technology for a new generation of materials. In Sintering applications. London, UK: IntechOpen.
   Google Scholar
• Tsai, S. (2018). Introduction to composite materials. New York: Routledge.https://doi.org/10.1201/9780203750148
   Google Scholar
• Velmurugan, C., & Senthilkumar, V. (2019). Optimization of spark plasma sintering parameters for NiTiCu shape memory alloys. Materials and Manufacturing Processes, 34(4), 369–378. doi:10.1080/10426914.2018.1512118
   Web of Science ®Google Scholar
• Vineela, M. G., Dave, A., & Chaganti, P. K. (2018). Artificial neural network based prediction of tensile strength of hybrid composites. Materials Today: Proceedings, 5(9), 19908–19915.
   Google Scholar
• Xie, W., He, J., Zhu, S., Holgate, T., Wang, S., Tang, X., … Tritt, T. M. (2011). Investigation of the sintering pressure and thermal conductivity anisotropy of melt-spun spark-plasma-sintered (Bi, Sb) 2 Te 3 thermoelectric materials. Journal of Materials Research, 26(15), 1791–1799. doi:10.1557/jmr.2011.170
   Web of Science ®Google Scholar
• Xu, Y., Zhang, Q., Zhang, W., & Zhang, P. (2015). Optimization of injection molding process parameters to improve the mechanical performance of polymer product against impact. The International Journal of Advanced Manufacturing Technology, 76(9–12), 2199–2208. doi:10.1007/s00170-014-6434-y
   Web of Science ®Google Scholar
• Yang, B., Wang, D., Chen, F., Su, L. F., Miao, J. B., Chen, P., … Liu, J. W. (2019). Melting and crystallization behaviors of poly (lactic acid) modified with graphene acting as a nucleating agent. Journal of Macromolecular Science, Part B, 58(2), 290–304. doi:10.1080/00222348.2018.1564222
   Web of Science ®Google Scholar
• Zhang, Z., Barkoula, N. M., Kocsis, J. K., & Friedrich., K. (2003). Artificial neural network predictions on erosive wear of polymers. Wear, 255(1–6), 708–713. doi:10.1016/S0043-1648(03)00149-2
   Google Scholar
• Zhang, Z., & Friedrich, K. (2003). Artificial neural networks applied to polymer composites: A review. Composites Science and Technology, 63(14), 2029–2044. doi:10.1016/S0266-3538(03)00106-4
   Web of Science ®Google Scholar