Coated and uncoated reinforcements metal matrix composites characteristics and applications – A critical review

References

• Abhijith, R., & Harish, T. M. (2016). Fabrication and analysis of aluminum 2024 and tungsten carbide (WC) metal matric composite by In-Situ method. International Journal of Engineering and Technical Research, 5, 400–18. https://doi.org/10.17577/IJERTV5IS080332
   Google Scholar
• Abraham, S., Pai, B. C., Satyanarayana, K. G., & Vaidyan, V. K. (1992). Copper coating on carbon fibres and their composites with aluminium matrix. Journal of Materials Science, 27(13), 3479–3486. https://doi.org/10.1007/BF01151823
   Web of Science ®Google Scholar
• Akhil, K. T., Varghese, J., Raphel, A., Vinoj, K., & Francis, F. K. (2017). To study the cooling rate and influence of boron carbide on mechanical properties of aluminium LM13 matrix B4C reinforced composites. Materials Today: Proceedings, 4(8), 7202–7207. https://doi.org/10.1016/j.matpr.2017.07.047
   Google Scholar
• Allison, J. E., & Cole, G. S. (1993). Metal-matrix composites in the automotive industry: Opportunities and challenges. Journal of the Minerals, Metals and Materials Society, 45(1), 19–24. https://doi.org/10.1007/BF03223361
   Web of Science ®Google Scholar
• Amanov, A., Sasaki, S., Kim, D. E., Penkov, O. V., & Pyun, Y. S. (2013). Improvement of the tribological properties of Al6061–T6 alloy under dry sliding conditions. Tribology International, 64(3), 24–32. https://doi.org/10.1016/j.triboint.2013.02.034
   Google Scholar
• Antil, P., Singh, S., & Manna, A. (2019). Analysis on effect of electroless coated SiCp on mechanical properties of polymer matrix composites. Particulate Science and Technology, 37(7), 791–798. https://doi.org/10.1080/02726351.2018.1444691
   Web of Science ®Google Scholar
• Arivukkarasan, S., Dhanalakshmi, V., Stalin, B., & Ravichandran, M. (2018). Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites. Particulate Science and Technology, 36(8), 967–973. https://doi.org/10.1080/02726351.2017.1331285
   Web of Science ®Google Scholar
• Aruri, D., Adepu, K., Adepu, K., & Bazavada, K. (2013). Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+ Gr) and (SiC+ Al2O3)] fabricated by friction stir processing. Journal of Materials Research and Technology, 2(4), 362–369. https://doi.org/10.1016/j.jmrt.2013.10.004
   Google Scholar
• Ashassi-Sorkhabi, H., & Rafizadeh, S. H. (2004). Effect of coating time and heat treatment on structures and corrosion characteristics of electroless Ni–P alloy deposits. Surface & Coatings Technology, 176(3), 318–326. https://doi.org/10.1016/S0257-8972(03)00746-1
   Web of Science ®Google Scholar
• Baik, K. H. (2013). Interfacial reaction and fracture behavior of cobalt-coated Al2O3 reinforced aluminum composites. Materials Science and Engineering: A, 355(2), 79–87. https://doi.org/10.1016/S0921-5093(03)00042-X
   Google Scholar
• Bas, J. A., Calero, J. A., & Dougan, M. J. (2003). Sintered soft magnetic materials. Properties and applications. Journal of Magnetism and Magnetic Materials, 254(2003), 391–398. https://doi.org/10.1016/S0304-8853(02)00934-4
   Web of Science ®Google Scholar
• Basavarajappa, S., Chandramohan, G., Mahadevan, A., Thangavelu, M., Subramanian, R., & Gopalakrishnan, P. (2007). Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite. Wear, 262(7), 1007–1012. https://doi.org/10.1016/j.wear.2006.10.016
   Web of Science ®Google Scholar
• Bhaskar Raju, S. A., Swamy, A. R. K., & Ramesha, A. (2019). Mechanical characterization of Al6061-tungesten carbide composites using powder metallurgy technique. International Journal of Engineering Applied Sciences and Technology, 4(7), 325–331. https://doi.org/10.33564/IJEAST.2019.v04i07.055
   Google Scholar
• Boopathi, M. M., Arulshri, K. P., & Iyandurai, N. (2013). Evaluation of mechanical properties of aluminium alloy 2024 reinforced with silicon carbide and fly ash hybrid metal matrix composites. American Journal of Applied Sciences, 10(3), 219–229. https://doi.org/10.3844/ajassp.2013.219.229
   Google Scholar
• Bowman, R. R., Misra, A. K., & Arnold, S. M. (1995). Processing and mechanical properties of Al2O3 fiber-reinforced NiAl composites. Metallurgical and Materials Transactions A, 26(3), 615–628. https://doi.org/10.1007/BF02663910
   Web of Science ®Google Scholar
• Busquets-Mataix, D., Martvnez, N., Salvador, M. D., & Amigσ, V. (2004). Mechanical and tribological properties of Ti3 Al reinforced aluminium matrix composites. Advanced Composites Letters, 13(1), 096369350401300. https://doi.org/10.1177/096369350401300102
   Web of Science ®Google Scholar
• Chawla, N., & Chawla, K. K. (2006). Metal-matrix composites in ground transportation. The Journal of the Minerals, Metals and Materials Society, 58(11), 67–70. https://doi.org/10.1007/s11837-006-0231-5
   Web of Science ®Google Scholar
• Chawla, N., & Shen, Y. L. (2001). Mechanical behavior of particle reinforced metal matrix composites. Advanced Engineering Materials, 3(6), 357–370. https://doi.org/10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I
   Web of Science ®Google Scholar
• Chivavibul, P., Watanabe, M., Kuroda, S., & Shinoda, K. (2007). Effects of carbide size and Co content on the microstructure and mechanical properties of HVOF-sprayed WC–Co coatings. Surface & Coatings Technology, 202(3), 509–521. https://doi.org/10.1016/j.surfcoat.2007.06.026
   Web of Science ®Google Scholar
• Chou, Y. K., & Liu, J. (2005). CVD diamond tool performance in metal matrix composite machining. Surface & Coatings Technology, 200(6), 1872–1878. https://doi.org/10.1016/j.surfcoat.2005.08.094
   Web of Science ®Google Scholar
• Chung, C. K., & Chang, W. T. (2009). Effect of pulse frequency and current density on anomalous composition and nanomechanical property of electrodeposited Ni–Co films. Thin Solid Films, 517(17), 4800–4804. https://doi.org/10.1016/j.tsf.2009.03.087
   Web of Science ®Google Scholar
• Corbin, S. F., & Wilkinson, D. S. (1996). The tensile properties of a particulate reinforced al alloy in the temperature range− 196–300°C. Canadian Metallurgical Quarterly, 35(2), 189–198. https://doi.org/10.1179/cmq.1996.35.2.189
   Web of Science ®Google Scholar
• Das, S. (2004). Development of aluminium alloy composites for engineering applications. Transactions of the Indian Institute of Metals, 57(4), 325–334. http://www.igcar.gov.in/transiim/2004/TP-1897.pdf
   Web of Science ®Google Scholar
• Davidson, A. M., & Regener, D. (2000). A comparison of aluminium-based metal-matrix composites reinforced with coated and uncoated particulate silicon carbide. Composites Science and Technology, 60(6), 865–869. https://doi.org/10.1016/S0266-3538(99)00151-7
   Web of Science ®Google Scholar
• Deepa, J. P., Abhilash, S., Rajan, T. P. D., Pavithran, C., & Pai, B. C. (2015). Structure and properties of electroless Cu and Ni-B coated B4C particle dispersed aluminum composites by powder metallurgy technique. Materials Science Forum, 830, 480–484. https://doi.org/10.4028/www.scientific.net/MSF.830-831.480
   Google Scholar
• Deshmukh, P., Bhatt, J., & Pathak, S. (2015). Structure property correlation of Al based MMC reinforced with Cu coated rice husk ash SiO2 particles. Transactions of the Indian Institute of Metals, 68(2), 201–209. https://doi.org/10.1007/s12666-014-0443-2
   Web of Science ®Google Scholar
• Doel, T. J. A., & Bowen, P. (1996). Tensile properties of particulate-reinforced metal matrix composites. Composites. Part A, Applied Science and Manufacturing, 27(8), 655–665. https://doi.org/10.1016/1359-835X(96)00040-1
   Web of Science ®Google Scholar
• Fabian, S. J. A., & Selvam, B. (2014). Densification behaviour of aluminium reinforced with tungsten carbide particulate metal matrix composite processed by P/M. IOSR Journal of Mechanical and Civil Engineering, 3, 24–29. http://www.iosrjournals.org/iosr-jmce/papers/ICRTEM/ME/Volume-3/IOSRME143.pdf
   Google Scholar
• Fenineche, N., Coddet, C., & Saida, A. (1990). Effect of electrodeposition parameters on the microstructure and mechanical properties of Co-Ni alloys. Surface & Coatings Technology, 41(1), 75–81. https://doi.org/10.1016/0257-8972(90)90131-U
   Web of Science ®Google Scholar
• Garcia, M., Martinez, H. V., & Ortiz, A. (2010). Compoforging of Al-Si metal matrix composites reinforced with beta-SiC: An alternative technique. Open Industrial and Manufacturing Engineering Journal, 3, 1–6. http://dx.doi.org/10.2174/1874152501003010001
   Google Scholar
• Gnjidić, Z., Boz̆ić, D., & Mitkov, M. (2001). The influence of SiC particles on the compressive properties of metal matrix composites. Materials Characterization, 47(2), 129–138. https://doi.org/10.1016/S1044-5803(01)00161-9
   Web of Science ®Google Scholar
• Golodnitsky, D., Gudin, N. V., & Volyanuk, G. A. (1998). Cathode process in nickel-cobalt alloy deposition from sulfamate electrolytes-application to electroforming. Plating and Surface Finishing, 85, 65–73. :http://www.nmfrc.org/pdf/p0298e.pdf
   Google Scholar
• Gomes, J. R., Ramalho, A., Gaspar, M. C., & Carvalho, S. F. (2005). Reciprocating wear tests of Al–Si/SiCp composites: A study of the effect of stroke length. Wear, 259(1–6), 545–552. https://doi.org/10.1016/j.wear.2005.02.088
   Web of Science ®Google Scholar
• Gomez, L., Busquets-Mataix, D., Amigo, V., & Salvador, M. D. (2009). Analysis of boron carbide aluminum matrix composites. Journal of Composite Materials, 43(9), 987–995. https://doi.org/10.1177/0021998308097731
   Web of Science ®Google Scholar
• Gopal Krishna, U. B., Sreenivas Rao, K. V., & Vasudeva, B. (2013). Effect of boron carbide reinforcement on aluminium matrix composites. International Journal of Metallurgical and Materials Science and Engineering, 3(1), 41–48. http://www.tjprc.org/publishpapers/--1356162960-5.effect.full.pdf
   Google Scholar
• Gowri Shankar, M. C., Jayashree, P. K., Shetty, R., Kini, A., & Sharma, S. S. (2013). Individual and combined effect of reinforcements on stir cast aluminium metal matrix composites-a review. International Journal of Current Engineering and Technology, 3(3), 922–934. https://doi.org/10.1.1.841.4384
   Google Scholar
• Gowri Shankar, M. C., Kini, A., & Sharma, S. S. (2016). Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B4C particles. Indian Journal of Science and Technology, 9(12), 1–9. https://doi.org/10.17485/ijst/2016/v9i12/88073
   Google Scholar
• Gowri Shankar, M. C., Kini, A., & Sharma, S. S. (2016). Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging condition. International Journal of Technology, 7(6), 1001–1008. https://doi.org/10.14716/ijtech.v7i6.1951
   Web of Science ®Google Scholar
• Gowri Shankar, M. C., Kini, A., & Sharma, S. S. (2017). Microstructure and fracture behavior of two stage stir cast Al6061-SiC composites. Journal of Material and Environment Science, 8(1), 257–263. https://www.jmaterenvironsci.com/Document/vol8/vol8_N1/27-JMES-2446-Gowri%20Shankar.pdf
   Google Scholar
• Gowrishankar, M. C., Hiremath, P., Shettar, M., Sharma, S. S., & Rao, S. (2020). Experimental validity on the casting characteristics of stir cast aluminium composites. Journal of Materials Research and Technology, 9(3), 3340–3347. https://doi.org/10.1016/j.jmrt.2020.01.028
   Google Scholar
• Gupta, M., Lai, M. O., & Soo, C. Y. (1996). Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites. Materials Science and Engineering: A, 210(2), 114–122. https://doi.org/10.1016/0921-5093(95)10077-6
   Web of Science ®Google Scholar
• Hegde, N. T., Pai, D., & Hegde, R. (2019). Heat treatment and mechanical characterization of LM-25/tungsten carbide metal matrix composites. Materials Today: Proceedings, 19, 810–817. https://doi.org/10.1016/j.matpr.2019.08.136
   Google Scholar
• Hu, H. M., Lavernia, E. J., Harrigan, W. C., Kajuch, J., & Nutt, S. R. (2001). Microstructural investigation on B4C/Al-7093 composite. Materials Science and Engineering: A, 297(1–2), 94–104. https://doi.org/10.1016/S0921-5093(00)01254-5
   Web of Science ®Google Scholar
• Huang, G., Hou, W., & Shen, Y. (2018). Evaluation of the microstructure and mechanical properties of WC particle reinforced aluminum matrix composites fabricated by friction stir processing. Materials Characterization, 138, 26–37. https://doi.org/10.1016/j.matchar.2018.01.053
   Web of Science ®Google Scholar
• Jagadish, B. S. (2015). Synthesis and characterisation of aluminium 2024 and graphene metal matrix composites by powder metallurgy means. SSRG International Journal of Mechanical Engineering, 2(7), 13–17. https://doi.org/10.14445/23488360/IJME-V2I7P103
   Google Scholar
• Jenix Rino, J., Chandramohan, D., & Sucitharan, K. S. (2012). An overview on development of aluminium metal matrix composites with hybrid reinforcement. International Journal of Science and Research, 1(3), 196–203. https://doi.org/10.1.1.682.2785
   Google Scholar
• Kakuno, E. M., Mosca, D. H., Mazzaro, I., Mattoso, N., Schreiner, W. H., Gomes, M. A. B., & Cantao, M. P. (1997). Structure, Composition, and Morphology of Electrodeposited Co x Fe1 − x Alloys. Journal of the Electrochemical Society, 144(9), 3222. https://doi.org/10.1149/1.1837987
   Web of Science ®Google Scholar
• Kalaiselvan, K., Murugan, N., & Parameswaran, S. (2011). Production and characterization of AA6061–B4C stir cast composite. Materials & Design, 32(7), 4004–4009. https://doi.org/10.1016/j.matdes.2011.03.018
   Web of Science ®Google Scholar
• Kim, C., Lim, B., Kim, B., Shim, U., Oh, S., Sung, B., & Baik, S. (2009). Strengthening of copper matrix composites by nickel-coated single-walled carbon nanotube reinforcements. Synthetic Metals, 159(5–6), 424–429. https://doi.org/10.4028/www.scientific.net/MSF.830-831.687
   Web of Science ®Google Scholar
• Kishore, P., Kumar, P. M., & Dinesh, D. (2019). Wear analysis of Al5052 alloy with varying percentage of tungsten carbide. AIP Conference Proceedings, 2128(1), 040003. https://doi.org/10.1063/1.5117965
   Google Scholar
• Kulkarni, A. G., Pai, B. C., & Balasubramanian, N. (1979). The cementation technique for coating carbon fibres. Journal of Materials Science, 14(3), 592–598. https://doi.org/10.1007/BF00772718
   Web of Science ®Google Scholar
• Kumar, G. V., Pramod, R., Gouda, P. S., & Rao, C. S. P. (2018). Effect of tungsten carbide reinforcement on the aluminum 6061 alloy. Journal of Testing and Evaluation, 47(4), 2613–2629. https://doi.org/10.1520/JTE20170545
   Web of Science ®Google Scholar
• Kumar, G. V., Ramesha, A., Swamy, A. R. K., & Prakash, J. N. (2011). Effect of particulate reinforcements on the mechanical properties of Al6061-WC and Al6061-Gr MMCs. Journal of Minerals and Materials Characterization and Engineering, 10(12), 1141.
   Google Scholar
• Kumar, S., & Balasubramanian, V. (2010). Effect of reinforcement size and volume fraction on the abrasive wear behaviour of AA7075 Al/SiCp P/M composites—a statistical analysis. Tribology International, 43(1–2), 414–422. https://doi.org/10.1016/j.triboint.2009.07.003
   Web of Science ®Google Scholar
• Lee, K. B., Sim, H. S., Cho, S. Y., & Kwon, H. (2001). Reaction products of Al–Mg/B4C composite fabricated by pressureless infiltration technique. Materials Science and Engineering: A, 302(2), 227–234. https://doi.org/10.1016/S0921-5093(00)01831-1
   Web of Science ®Google Scholar
• Lee, Y. F., Lee, S. L., Chuang, C. L., & Lin, J. C. (1999). Effects of SiCp reinforcement by electroless copper plating on properties of Cu/SiCp composites. Powder Metallurgy, 42(2), 147–152. https://doi.org/10.1179/003258999665495
   Web of Science ®Google Scholar
• Lekatou, A., Karantzalis, A. E., Evangelou, A., Gousia, V., Kaptay, G., Gácsi, Z., & Simon, A. (2015). Aluminium reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): Microstructure, wear and corrosion behaviour. Materials & Design, 65, 1121–1135. https://doi.org/10.1016/j.matdes.2014.08.040
   Web of Science ®Google Scholar
• Li, Y., Jiang, H., Huang, W., & Tian, H. (2008). Effects of peak current density on the mechanical properties of nanocrystalline Ni–Co alloys produced by pulse electrodeposition. Applied Surface Science, 254(21), 6865–6869. https://doi.org/10.1016/j.apsusc.2008.04.087
   Web of Science ®Google Scholar
• Lin, Y. P., & Selman, J. R. (1993). Electrodeposition of corrosion‐resistant Ni‐Zn alloy: I. Cyclic voltammetric study. Journal of the Electrochemical Society, 140(5), 1299. https://doi.org/10.1149/1.2220974
   Web of Science ®Google Scholar
• Lloyd, D. J. (1994). Particle reinforced aluminium and magnesium matrix composites. International Materials Reviews, 39(1), 1–23. https://doi.org/10.1179/imr.1994.39.1.1
   Web of Science ®Google Scholar
• Lokhande, A. C., & Bagi, J. S. (2014). Studies on enhancement of surface mechanical properties of electrodeposited Ni–Co alloy coatings due to saccharin additive. Surface & Coatings Technology, 258, 225–231. https://doi.org/10.1016/j.surfcoat.2014.09.023
   Web of Science ®Google Scholar
• Madhukumar, K. N., Purushotham Shenoy, K., Krishnan, V., Yatish, S., & Noolkar, V. (2017). Development and characterization of Al7075 alloy reinforced with tungsten carbide (WC) and E glass fiber. International Journal of Advances in Scientific Research and Engineering, 3(1), 50–54. https://www.ijert.org/research/characterization-of-aluminium-reinforced-with-tungsten-carbide-particulate-and-flyash-metal-matrix-composites-IJERTV4IS050719.pdf
   Google Scholar
• Mandal, D., Dutta, B. K., & Panigrahi, S. C. (2007). Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42(8), 2796–2801. https://doi.org/10.1007/s10853-006-0188-3
   Web of Science ®Google Scholar
• Maqbool, A., Hussain, M. A., Khalid, F. A., Bakhsh, N., Hussain, A., & Kim, M. H. (2013). Mechanical characterization of copper coated carbon nanotubes reinforced aluminum matrix composites. Materials Characterization, 86, 39–48. https://doi.org/10.1016/j.matchar.2013.09.006
   Web of Science ®Google Scholar
• Mithun, B. R., Nagaral, M., Auradi, V., & Bharath, V. (2017). Microstructure and mechanical properties of Cu-coated Al2O3 particulate reinforced 6061 Al metal matrix composite. Materials Today: Proceedings, 4(10), 11015–11022. https://doi.org/10.1016/j.matpr.2017.08.060
   Google Scholar
• Miyajima, T., & Iwai, Y. (2003). Effects of reinforcements on sliding wear behavior of aluminum matrix composites. Wear, 255(1–6), 606–616. https://doi.org/10.1016/S0043-1648(03)00066-8
   Web of Science ®Google Scholar
• Mohanavel, V., Rajan, K., Kumar, S. S., Udishkumar, S., & Jayasekar, C. (2018). Effect of silicon carbide reinforcement on mechanical and physical properties of aluminum matrix composites. Materials Today: Proceedings, 5(1), 2938–2944. https://doi.org/10.1016/j.matpr.2018.01.089
   Google Scholar
• Mohandas, A., & Radhika, N. (2017). Studies on mechanical behaviour of aluminium/nickel coated silicon carbide reinforced functionally graded composite. Tribology in Industry, 39(2), 145–151. https://doi.org/10.24874/ti.2017.39.02.01
   Google Scholar
• Mousavian, R. T., Damadi, S. R., Khosroshahi, R. A., Brabazon, D., & Mohammadpour, M. (2005). A comparison study of applying metallic coating on SiC particles for manufacturing of cast aluminum matrix composites. The International Journal of Advanced Manufacturing Technology, 81(1–4), 433–444. https://doi.org/10.1007/s00170-015-7246-4
   Google Scholar
• Murty, S. V., Rao, B. N., & Kashyap, B. P. (2003). On the hot working characteristics of 6061Al–SiC and 6061–Al2O3 particulate reinforced metal matrix composites. Composites Science and Technology, 63(1), 119–135. https://doi.org/10.1016/S0266-3538(02)00197-5
   Web of Science ®Google Scholar
• Navinšek, B., Panjan, P., & Milošev, I. (1999). PVD coatings as an environmentally clean alternative to electroplating and electroless processes. Surface & Coatings Technology, 116, 476–487. https://doi.org/10.1016/S0257-8972(99)00145-0
   Web of Science ®Google Scholar
• Nineva, S., Dobrovolska, T., & Krastev, I. (2006). Properties of electrodeposited silver–cobalt coatings. Journal of Applied Electrochemistry, 41(12), 1397–1406. https://doi.org/10.1007/s10800-011-0361-5
   Google Scholar
• Ocelík, V., De Oliveira, U., De Boer, M., & De Hosson, J. T. M. (2007). Thick Co-based coating on cast iron by side laser cladding: Analysis of processing conditions and coating properties. Surface & Coatings Technology, 201(12), 5875–5883. https://doi.org/10.1016/j.surfcoat.2006.10.044
   Web of Science ®Google Scholar
• Onoro, J., Salvador, M. D., & Cambronero, L. E. G. (2009). High-temperature mechanical properties of aluminium alloys reinforced with boron carbide particles. Materials Science and Engineering: A, 499(2), 421–426. https://doi.org/10.1016/j.msea.2008.09.013
   Web of Science ®Google Scholar
• Ozben, T., Kilickap, E., & Cakır, O. (2008). Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC. Journal of Materials Processing Technology, 198(1–3), 220–225. https://doi.org/10.1016/j.jmatprotec.2007.06.082
   Web of Science ®Google Scholar
• Ozden, S., Ekici, R., & Nair, F. (2007). Investigation of impact behaviour of aluminium based SiC particle reinforced metal–matrix composites. Composites. Part A, Applied Science and Manufacturing, 38(2), 484–494. https://doi.org/10.1016/j.compositesa.2006.02.026
   Web of Science ®Google Scholar
• Pai, B. C., & Rohatgi, P. K. (1975). Copper coating on graphite particles. Materials Science and Engineering, 21, 161–167. https://doi.org/10.1016/0025-5416(75)90211-6
   Google Scholar
• Pancrecious, J. K., Deepa, J. P., Ramya, R., Rajan, T. P. D., Gowd, E. B., & Pai, B. C. (2015). Ultrasonic-assisted electroless coating of Ni-B alloy and composites on aluminum alloy substrates. Materials Science Forum, 830-831, 687–690. https://doi.org/10.4028/www.scientific.net/MSF.830-831.687
   Google Scholar
• Pazhuhanfar, Y., & Eghbali, B. (2019). Effect of processing parameters on microstructure and mechanical properties of Al6061/B4C metal matrix composite fabricated by using stir casting, post-accumulative roll bonding and aging treatment. Transactions of the Indian Institute of Metals, 72(2), 545–558. https://doi.org/10.1007/s12666-018-1506-6
   Web of Science ®Google Scholar
• Peng, Z., & Fuguo, L. (2010). Effects of particle clustering on the flow behavior of SiC particle reinforced Al metal matrix composites. Rare Metal Materials and Engineering, 39(9), 1525–1531. https://doi.org/10.1016/S1875-5372(10)60123-3
   Web of Science ®Google Scholar
• Pourhosseini, S., Beygi, H., & Sajjadi, S. A. (2018). Effect of metal coating of reinforcements on the microstructure and mechanical properties of Al-Al2O3 nanocomposites. Materials Science and Technology, 34(2), 145–152. https://doi.org/10.1080/02670836.2017.1366708
   Web of Science ®Google Scholar
• Prabu, S. B., Karunamoorthy, L., Kathiresan, S., & Mohan, B. (2006). Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite. Journal of Materials Processing Technology, 171(2), 268–273. https://doi.org/10.1016/j.jmatprotec.2005.06.071
   Web of Science ®Google Scholar
• Previtali, B., Pocci, D., & Taccardo, C. (2008). Application of traditional investment casting process to aluminium matrix composites. Composites. Part A, Applied Science and Manufacturing, 39(10), 1606–1617. https://doi.org/10.1016/j.compositesa.2008.07.001
   Web of Science ®Google Scholar
• Qiao, G., Jing, T., Wang, N., Gao, Y., Zhao, X., Zhou, J., & Wang, W. (2005). High-speed jet electrodeposition and microstructure of nanocrystalline Ni–Co alloys. Electrochimica acta, 51(1), 85–92. https://doi.org/10.1016/j.electacta.2005.03.050
   Web of Science ®Google Scholar
• Rahman, M. H., & Rashed, H. M. (2014). “Characterization of silicon carbide reinforced aluminum matrix composites. Procedia Engineering, 90, 103–109. https://doi.org/10.1016/j.proeng.2014.11.821
   Google Scholar
• Ramnath, B. V., Elanchezhian, C., Annamalai, R. M., Aravind, S., Atreya, T. S. A., Vignesh, V., & Subramanian, C. (2014). Aluminium metal matrix composites–a review. Reviews on Advanced Materials Science, 38(5), 55–60.
   Google Scholar
• Rao, V. R., Ramanaiah, N., Rao, M. S., Sarcar, M. M., & Kartheek, G. (2016). Optimisation of process parameters for minimum volumetric wear rate on AA7075-TiC metal matrix composite. International Journal of Automotive & Mechanical Engineering, 13(3), 3669–3680. https://doi.org/10.15282/ijame.13.3.2016.11.0301
   Web of Science ®Google Scholar
• Ravichandran, M. V., Prasad, K. R., & Dwarakadasa, E. S. (1992). Fracture toughness evaluation of aluminium 4% Mg-Al2O3 liquid-metallurgy particle composite. Journal of Materials Science Letters, 11(8), 452–456. https://doi.org/10.1007/BF00731101
   Google Scholar
• Ravikumar, K., Kiran, K., & Sreebalaji, V. S. (2017). Characterization of mechanical properties of aluminium/tungsten carbide composites. Measurement, 102, 142–149. https://doi.org/10.1016/j.measurement.2017.01.045
   Web of Science ®Google Scholar
• Reddy, A. P., Krishna, P. V., Rao, R. N., & Murthy, N. V. (2017). Silicon carbide reinforced aluminium metal matrix nano composites− a review. Materials Today, 4, 3959–3971. https://doi.org/10.1016/j.matpr.2017.02.296
   Google Scholar
• Roebuck, B. (1987). Fractography of a SiC particulate reinforced aluminium metal matrix composite. Journal of Materials Science Letters, 6(10), 1138–1140. https://doi.org/10.1007/BF01729162
   Google Scholar
• Rohatgi, P. K. (1994). Low-cost, fly-ash-containing aluminum-matrix composites. The Journal of the Minerals, Metals and Materials Society, 46(11), 55–59. https://doi.org/10.1007/BF03222635
   Google Scholar
• Sahin, Y. (2003). Preparation and some properties of SiC particle reinforced aluminium alloy composites. Materials & Design, 24(8), 671–679. https://doi.org/10.1016/S0261–3069(03)00156-0
   Web of Science ®Google Scholar
• Sahoo, P., & Das, S. K. (2011). Tribology of electroless nickel coatings–a review. Materials and Design. 32(4), 1760–1775. https://doi.org/10.1016/j.matdes.2010.11.013
   Google Scholar
• Sánchez, M., Rams, J., & Ureña, A. (2010). Fabrication of aluminium composites reinforced with carbon fibres by a centrifugal infiltration process. Composites. Part A, Applied Science and Manufacturing, 41(11), 1605–1611. https://doi.org/10.1016/j.compositesa.2010.07.014
   Web of Science ®Google Scholar
• Sathyashankarasharma, G., A. Kini, G., Shettar, M., & Hiremath, P. (2019). Aging kinetics and microstructural features of Al6061-SiC+B4C stir cast hybrid composites. International Journal of Automotive and Mechanical Engineering, 16(4), 7211–7224. https://doi.org/10.15282/ijame.16.4.2019.04.0538
   Web of Science ®Google Scholar
• Schröder, J., & Kainer, K. U. (1991). Magnesium-base hybrid composites prepared by liquid infiltration. Materials Science and Engineering, 135, 33–36. https://doi.org/10.1016/0921-5093(91)90532-R
   Google Scholar
• Seshappa, A., Kiran Kumar, G. K., & Bhavani Sankar, C. (2018). Analysis of mechanical characteristics of silicon carbide reinforced with aluminum metal matrix composites. International Journal of Scientific Development and Research, 3(11), 125–131. http://www.ijsdr.org/papers/IJSDR1811021.pdf
   Google Scholar
• Shankar, M. C., Jayashree, P. K., Sharma, S. S., Shetty, R., & Vinay, K. (2018). Quality enhancement of TIG welded Al6061 SiCp composites by age hardening Process. International Journal of Automotive and Mechanical Engineering, 15(3), 5573–5582. https://doi.org/10.15282/ijame.15.3.2018.13.0428
   Web of Science ®Google Scholar
• Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K., & Shettar, M. (2018). Tensile fractography of artificially aged Al6061-B4C composites. Journal of Mechanical Engineering and Sciences, 12(3), 3866–3875. https://doi.org/10.15282/jmes.12.3.2018.8.0339
   Web of Science ®Google Scholar
• Sharma, S. S., Shankar, M. C. G., & Kini, A. (2016). Metallographic and bulk hardness of artificially aged Al6061-B4C-SiC stir cast hybrid composites. Material Science Form-Trans Tech Publications Inc.- Material Science & Engineering, 880, 140–143. https://doi.org/10.4028/www.scientific.net/MSF.880.140
   Google Scholar
• Shi, L., Sun, C., Gao, P., Zhou, F., & Liu, W. (2006). Mechanical properties and wear and corrosion resistance of electrodeposited Ni–Co/SiC nanocomposite coating. Applied Surface Science, 252(10), 3591–3599. https://doi.org/10.1016/j.apsusc.2005.05.035
   Web of Science ®Google Scholar
• Shirvanimoghaddam, K., Khayyam, H., Abdizadeh, H., Akbari, M. K., Pakseresht, A. H., Ghasali, E., & Naebe, M. (2016). Boron carbide reinforced aluminium matrix composite: Physical, mechanical characterization and mathematical modelling. Materials Science and Engineering: A, 6(58), 135–149. https://doi.org/10.1016/j.msea.2016.01.114
   Google Scholar
• Shorowordi, K. M., Laoui, T., Haseeb, A. S. M. A., Celis, J. P., & Froyen, L. (2003). Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: A comparative study. ”, Journal of Materials Processing Technology, 142(3), 738–743. https://doi.org/10.1016/S0924-0136(03)00815-X
   Web of Science ®Google Scholar
• Singh, B. B., & Balasubramanian, M. (2009). Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites. Journal of Materials Processing Technology, 209(4), 2104–2110. https://doi.org/10.1016/j.jmatprotec.2008.05.002
   Web of Science ®Google Scholar
• Srivatsan, T. S., Al-Hajri, M., & Vasudevan, V. K. (2005). Cyclic plastic strain response and fracture behavior of 2009 aluminum alloy metal-matrix composite. International Journal of Fatigue, 27(4), 357–371. https://doi.org/10.1016/j.ijfatigue.2004.08.009
   Web of Science ®Google Scholar
• Sudagar, J., Venkateswarlu, K., & Lian, J. (2010). Dry sliding wear properties of a 7075-T6 aluminum alloy coated with Ni-P (h) in different pretreatment conditions. Journal of Materials Engineering and Performance, 19(6), 810–818. https://doi.org/10.1007/s11665-009-9545-0
   Web of Science ®Google Scholar
• Sujan, D., Oo, Z., Rahman, M. E., Maleque, M. A., & Tan, C. K. (2012). Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC. International Journal of Materials and Metallurgical Engineering, 6(8), 678–681. https://doi.org/10.5281/zenodo.1076548
   Google Scholar
• Swamy, A. R. K., Ramesha, A., Veeresh Kumar, G. B., & Prakash, J. N. (2011). Effect of particulate reinforcements on the mechanical properties of Al6061-WC and Al6061-Gr MMCs. Journal of Minerals and Materials Characterization and Engineering, 10(12), 1141–1152.
   Google Scholar
• Tang, Y., Hirosawa, S., Saikawa, S., Matsuda, K., Lee, S., Horita, Z., & Terada, D. (2020). Microstructures and the mechanical properties of the Al–Li–Cu alloy strengthened by the combined use of accumulative roll bonding and aging. Advanced Engineering Materials, 22(1), 50–61. https://doi.org/10.1002/adem.201900561
   Web of Science ®Google Scholar
• Thevenot, F. (1990). Boron carbide—a comprehensive review. Journal of the European Ceramic Society, 6(4), 205–225. https://doi.org/10.1016/0955-2219(90)90048-K
   Google Scholar
• Thünemann, M., Beffort, O., Kleiner, S., & Vogt, U. (2007). Aluminum matrix composites based on preceramic-polymer-bonded SiC preforms. Composites Science and Technology, 67(11–12), 2377–2383. https://doi.org/10.1016/j.compscitech.2007.01.001
   Web of Science ®Google Scholar
• Tzamtzis, S., Barekar, N. S., Babu, N. H., Patel, J., Dhindaw, B. K., & Fan, Z. (2009). Processing of advanced Al/SiC particulate metal matrix composites under intensive shearing–A novel Rheo-process. Composites. Part A, Applied Science and Manufacturing, 40(2), 144–151. https://doi.org/10.1016/j.compositesa.2008.10.017
   Web of Science ®Google Scholar
• Tzeng, S. S., & Chang, F. Y. (2001). EMI shielding effectiveness of metal-coated carbon fiber-reinforced ABS composites. Materials Science and Engineering: A, 302(2), 258–267. https://doi.org/10.1016/S0921-5093(00)01824-4
   Web of Science ®Google Scholar
• Upadhyaya, G. S. (1998). Cemented tungsten carbides: Production, properties and testing. Noyes Publications, 2, 51–60. https://www.sciencedirect.com/book/9780815514176/cemented-tungsten-carbides
   Google Scholar
• Uvaraja, V. C., Natarajan, N., Rajendran, I., & Sivakumar, K. (2013). Tribological behavior of novel hybrid composite materials using Taguchi technique. Journal of Tribology, 135(2), 1-12. https://doi.org/10.1115/1.4023147
   Web of Science ®Google Scholar
• Vaes, J., Fransaer, J., & Celis, J. P. (2000). The role of metal hydroxides in NiFe deposition. Journal of the Electrochemical Society, 147(10), 3718–3724. https://doi.org/10.1149/1.1393963
   Web of Science ®Google Scholar
• Veeresh Kumar, G. B., Rao, C. S. P., Selvaraj, N., & Bhagyashekar, M. S. (2010). Studies on Al6061-SiC and Al7075-Al2O3 metal matrix composites. Journal of Minerals and Materials Characterization and Engineering, 9(1), 43–55. https://doi.org/10.4236/jmmce.2010.91004
   Google Scholar
• Vitt, B. (1989). Properties of black cobalt coatings. Solar Energy Materials, 19(1–2), 131–139. https://doi.org/10.1016/0165-1633(89)90029-4
   Google Scholar
• Wang, L., Gao, Y., Xu, T., & Xue, Q. (2006). A comparative study on the tribological behavior of nanocrystalline nickel and cobalt coatings correlated with grain size and phase structure. Materials Chemistry and Physics, 99(1), 96–103. https://doi.org/10.1016/j.matchemphys.2005.10.014
   Web of Science ®Google Scholar
• Wang, L., Gao, Y., Xue, Q., Liu, H., & Xu, T. (2005). Microstructure and tribological properties of electrodeposited Ni–Co alloy deposits. Applied Surface Science, 242(4), 326–332. https://doi.org/10.1016/j.apsusc.2004.08.033
   Web of Science ®Google Scholar
• Xiao-dong, Y. U., Yang-wei, W., & Fu-chi, W. (2007). Effect of particle size on mechanical properties of SiCp/5210 Al metal matrix composite. Tranformation of Nonferrous Material Society of China, 17, 276–279. https://doi.org/10036326-200711-17-S1A-s276-s279-a
   Google Scholar
• Yücel, O., & Tekin, A. (1997). The fabrication of boron carbide-aluminium composites by explosive consolidation. Ceramics International, 23(2), 149–152. https://doi.org/10.1016/S0272-8842(96)00014-4
   Web of Science ®Google Scholar
• Zamani, M., Amadeh, A., & Baghal, S. L. (2016). Effect of Co content on electrodeposition mechanism and mechanical properties of electrodeposited Ni–Co alloy. Transactions of Nonferrous Metals Society of China, 26(2), 484–491. https://doi.org/10.1016/S1003-6326(16)64136-5
   Web of Science ®Google Scholar
• Zhang, H., Ramesh, K. T., & Chin, E. S. C. (2004). High strain rate response of aluminum 6092/B4C composites. Materials Science and Engineering: A, 384(2), 26–34. https://doi.org/doi.org/10.1016/j.msea.2004.05.027
   Web of Science ®Google Scholar
• Zheng, B., Smugeresky, J. E., Zhou, Y., Baker, D., & Lavernia, E. J. (2008). Microstructure and properties of laser-deposited Ti6Al4V metal matrix composites using Ni-coated powder. Metallurgical and Materials Transactions A, 39(5), 1196–1205. https://doi.org/10.1007/s11661-008-9498-1
   Google Scholar