2,786
Views
0
CrossRef citations to date
0
Altmetric
MECHANICAL ENGINEERING

Assessment of in-cylinder pressure in diesel engines using novel combustion indices

ORCID Icon, ORCID Icon, & | (Reviewing editor)
Article: 1920561 | Received 06 May 2020, Accepted 18 Apr 2021, Published online: 08 Jul 2021

References

  • Beranek, L. L., & Vér, I. L. (1992). Noise and vibration control engineering. principlesand applications. John Wiley & Sons.
  • Broatch,, Novella, R., García-Tíscar, J., Gomez-Soriano, J., and Pal, P.. (2020). Analysis of combustion acoustic phenomena in compression–ignition engines using large eddy simulation. Physics of Fluids, 32(8), 085101. https://doi.org/10.1063/5.0011929
  • Broatch, A., Margot, X., Novella, R., Gomez-Soriano, J. (2016). Combustion noise analysis of partially premixed combustion concept using gasoline fuel in a 2-stroke engine. Energy ,107, 612–18. https://riunet.upv.es/handle/10251/81010
  • Changwei, Ji., Wang, S., Zhang, Bo. (2012).Performance). of a hybrid hydrogen–gasoline engine under various operating conditions. Applied Energy, 97, 584–589. Hirzel Verlag publication. https://doi.org/10.1016/j.apenergy.2011.11.056
  • Giakoumis, E. G., Rakopoulos, D. C., & Rakopoulos, C. D. (2016). Combustion noise radiation during dynamic internal combustion engine operation including effects ofvarious biofuel blends: A review. Renewable and Sustainable EnergyReviews, 54, 1099–1113. https://doi.org/10.1016/j.rser.2015.10.129
  • GrujicI.,, Stojanovic, N., Pesic, R., Davinic, A., & Narayan, S. (2020). High-Pressure hydrogen injection numerical analysis of IC engine operation with high pressure hydrogen injections. Transactions of FAMENA, 44(1), 55‐56. https://hrcak.srce.hr/file/343994
  • Huang, Y., Yang, F., Ouyang, M., Chen, L. (2011).Optimal feedback control with in- cylinder pressure sensor under engine start conditions. SAE Technical Paper 2011-01-1422.
  • Ibarra, D., Ramirez-Mendoza, R., & Lopez, E. (2016). A new approach for estimating noise emission of automotive vehicles. In Acta Acustica united with Acustica (Vol. 102, pp. 930–937).
  • Javad. Z., Rohani, A. (2020). Optimization and study of performance parameters in an engine fueled with hydrogen. International Journal of Hydrogen Energy, 45(1), 322–336. https://doi.org/10.1016/j.ijhydene.2019.10.250
  • Kaisan, M. U., Abubakar, S., Ashok, B., Dhinesh, B., Narayan, S., Ivan, G., & Nadica, S. (2018). Comparative analyses of biodiesel produced from Jatropha and neem seed oil using a gas chromatography mass spectroscopy technique. Biofuels, Taylor and Francis. https://doi.org/10.1080/17597269.2018.1537206
  • Kaisan, M. U., Anafi, F. O., J., N., Kulla,, D. M., & Umaru, S. (2016). GC-MS analyses of biodiesel produced from cotton seed oil. Nigerian Journal of Solar Energy, 27, 56–61. https://www.researchgate.net/publication/312136768_GCMS_Analysis_of_Methyl_Esters_of_Biodiesel_Produced_from_Cotton_Seed_Oil
  • Kaisan, M. U., Anafi, F. O., Nuszkowski, J., Kulla, D. M., & Umaru, S. (2017a). calorific value, flash point and cetane number of biodiesel from cotton, jatropha and neem oil binary and Multi-Blends with diesel. Biofuels, 8(4), 1–7.
  • Kaisan, M. U., Anafi, F. O., Nuszkwoski, J., Kulla, D. M., & Umaru, S. (2017a). Exhaust emissions of biodiesel binary and multi-blends from cotton, jatropha and neem oil from stationary multi cylinder CI Engine. Transportation Research Part D: Transport and Environment, 53, 403–414. https://doi.org/10.1016/j.trd.2017.04.040
  • Kaisan, M. U., Anafi, F. O., Nuszkwoski, J., Kulla, D. M., & Umaru, S. (2017b). Cold flow properties and viscosity of biodiesel from cotton, jatropha and neem binary and Multi-Blends with diesel. African Journal of Renewable and Alternative Energy, 1(1), 80–89. https://www.researchgate.net/profile/Kaisan-Muhammad-Usman/publication/320299769_COLD_FLOW_PROPERTIES_AND_VISCOSITY_OF_BIODIESEL_FROM_COTTON_JATROPHA_AND_NEEM_BINARY_AND_MULTI-BLENDS_WITH_DIESEL/links/59dcaee8458515e9ab4c9825/COLD-FLOW-PROPERTIES-AND-VISCOSITY-OF-BIODIESEL-FROM-COTTON-JATROPHA-AND-NEEM-BINARY-AND-MULTI-BLENDS-WITH-DIESEL.pdf
  • Kaisan, M. U., Anafi, F. O., Nuszkwoski, J. D. M., & Umaru, S. (2017b). Fuel properties of biodiesel from cotton, jatropha binary and Multi-Blends with diesel. Nigerian Journal of Material Science and Engineering, 7(1), 55–61. https://www.researchgate.net/profile/Kaisan-Muhammad-Usman/publication/320299769_COLD_FLOW_PROPERTIES_AND_VISCOSITY_OF_BIODIESEL_FROM_COTTON_JATROPHA_AND_NEEM_BINARY_AND_MULTI-BLENDS_WITH_DIESEL/links/59dcaee8458515e9ab4c9825/COLD-FLOW-PROPERTIES-AND-VISCOSITY-OF-BIODIESEL-FROM-COTTON-JATROPHA-AND-NEEM-BINARY-AND-MULTI-BLENDS-WITH-DIESEL.pdf
  • Katrasnik, T., Trenc, F., Opresnik, S. R. (2006). A New Criterion to Determine the Start of Combustion in Diesel Engines. Journal of Eng. Gas Turbines Power, 128(4), 928–933. https://doi.org/10.1115/1.2179471
  • Liu, L., Fei, H., & Du, J. (2016). Analysis of Pilot Injection Effects on Combustion Noise in PPCIDiesel Engines. In ASME 2016 Internal Combustion Engine Division Fall Technical Conference ICEF2016-9356.Greenville.
  • Mahajan, S. R., & Rajopadhye, R. D. (2013). Transportation Noise and Vibration-Sources. Prediction and Control. International Journal of Soft Computing and Engineering, 3(5), 2231–2307. https://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.644.7096&rep=rep1&type=pdf
  • Mahroogi, F. O., & Narayan, S. (2019a). Dynamic analysis of piston secondary motionusing FEM method. Proceedings of the 26th International Congress on Sound and Vibration, ICSV, 7–11 July, Montreal,Canada.
  • Mahroogi, F. O., & Narayan, S. (2019b). Design and analysis of double wishbonesuspension system for automotive applications. International Journal of Mechanical and Production Engineering Research and Development, 9(4), 1433–1432.
  • Mahroogi, F. O., & Narayan, S. (2019).A recent review of hybrid automotive systems in Gulf Corporation Council region. Proceedings of the Institution of Mechanical Engineers, Part D, Montreal, Canada. Journal of AutomobileEngineering, 233( 14), 3579–3587.
  • Mahroogi, F. O., Narayan, S., & Gupta, V. (2018). Acoustic transfer function in gasoline engines. International Journal of Vehicle Noise and Vibration, 14(3), 270–280. https://doi.org/10.1504/IJVNV.2018.097212
  • Narayan, S. (2013a). .Effect of dwell time on noise radiated from diesel engines. International Journal of Applied EngineeringResearch, 8(11), 1339–1347. https://www.ripublication.com/Volume/ijaerv8n11.htm
  • Narayan, S. (2013b). Wavelet analysis of diesel engine noise. Journal of Engineeringand AppliedSciences, 8(8), 255–259. https://medwelljournals.com/abstract/?doi=jeasci.2013.255.259
  • Narayan, S. (2014). A review of diesel engine acoustics. FME Transactions, 42(2), 150–154. https://doi.org/10.5937/fmet1402150N
  • Narayan, S. (2015a). Piston slap noise in engines. International Journal ofApplied EngineeringResearch, 8(14), 1695–1700. https://www.ripublication.com/Volume/ijaerv8n14.htm
  • Narayan, S. (2015b). Analysis of piston slap motion. IJAME, 20(2), 445–450. https://doi.org/10.1515/ijame-2015-0030
  • Narayan, S. ( 2015-01-0107). (2015c). Modeling of Noise Radiated from Engines. SAE Technical Paper.
  • Narayan, S. (2015d). Effects of Various Parameters on Piston Secondary Motion, SAE Technical Paper, 2015-01-0079. http://www.sae.org/publications/technical-papers/content/2015-01-0079/
  • Narayan, S., et al. (2020). Effects of propanol and camphor blends on emissions and performance of a spark ignition engine. American Chemical Society (ACS) Omega, 5(41), 26454–26462. https://doi.org/10.1021/acsomega.0c02953
  • Narayan, S., Alsagri, A. S., & Gupta, V. (2019). The design and analysis of hybrid automotive suspension system. International Journal of Mechanical and Production Engineering Research andDevelopment, 9(4), 637–642. https://issuu.com/tjprc/docs/63.ijmperdaug201963
  • Narayan, S., & Gupta, V. (2018). Numerical analysis of secondary motion of piston skirtin Engines. International Journal of Acoustics andVibrations, 23(4), 557–565. https://iiav.org/ijav/content/volumes/23_2018_745361521539384/vol_4/1513_fullpaper_293891545067945.pdf
  • Narayan, S., Milojevic, S., & Gupta, V. (2019). Combustion monitoring in enginesusing accelerometer signals. Journal of Vibroengineering, 21(6), 1552–1563. https://doi.org/10.21595/jve.2019.20516
  • Narayan, S. (2016). Noise and vibration characteristics of a micro car diesel engine. University of Roma Tre.
  • Payri, F., Broatch, A., Margot, X., & Monelletta, L. (2008). Sound quality assessmentof Diesel combustion noise using in-cylinder pressure components. Measurement Scienceand Technology, 20(1). IOP Publishing Ltd. https://ui.adsabs.harvard.edu/abs/2009MeScT..20a5107P/abstract
  • Ramalingam, S., and Rajendran, S. (2019). Assessment of performance, combustion, and emission behaviour of novel annona biodiesel-operated diesel engine. Advances in Eco-Fuels for a Sustainable Environment. Woodhead Publishing Series in Energy: (pp. 391–405). Wood head publishing.
  • Stojanovic, N., Ghazaly, N. M., Grujic, I., Glišovic, J., & Narayan, S. (2020). Influence of size of ventilated brake disc’s ribs on air flow velocity. International Journal of Advanced Science and Technology, 29(1), 637–647. http://sersc.org/journals/index.php/IJAST/article/view/3285
  • Tedros, M., et al. (2020). Data Driven In-Cylinder Pressure Diagram BasedOptimization Procedure. Journal of Material Science And. Engineering, 8(4), 294. https://www.mdpi.com/2077-1312/8/4/294
  • Teng, Su., Changwei, Ji., Shuofeng, Wang., Lei, Shi., Jinxin, Yang., Xiaoyu, Cong (2017a). Effect of spark timing on performance of a hydrogen-gasoline rotary engine. Energy Conversion and Management, 148(15), 120–127. https://doi.org/10.1016/j.enconman.2017.05.064
  • Teng, Su., Changwei, Ji., Shuofeng, Wang., Lei, Shi., Jinxin, Yang., Xiaoyu, Cong. (2017b). Investigation on combustion and emissions characteristics of a hydrogen-blended n-butanol rotary engine. International Journal of Hydrogen Energy, 42(41), 26142–26151. https://doi.org/10.1016/j.ijhydene.2017.08.200
  • Torii, K. (2014). Method using multiple regression analysis to separate engine radiation noise into the contributions of combustion noise and mechanical noise in the time domain. SAE International Journal of Engine, 7(3), 1502–1513. https://doi.org/10.4271/2014-01-1678
  • Torregrosa, A. J., Broatch, A., Martín, J., Monelletta, L. (2007). Combustion noise level assessment in direct injection diesel engines by means of in-cylinder pressure components. Measurement Science Andtechnology, 18(7), 2131–2142. IOP publishingltd https://doi.org/10.1088/0957-0233/18/7/045
  • Umaru, S., Kaisan, M. U., Usman, S., & Giwa, A. (2017). Effects of Garment Laundry Activities on the Slider Lock and Crosswise Strengths of NylonCoil Zippers. Nigerian Journal of Material Science and Engineering, 7(1), 81–86. https://www.researchgate.net/publication/316702019_EFFECTS_OF_GARMENT_LAUNDRY_ACTIVITIES_ON_THE_SLIDER_LOCK_AND_CROSSWISE_STRENGTHS_OF_NYLON_COIL_ZIPPERS/figures?lo=1&utm_source=google&utm_medium=organic
  • Vellaiyan, S., Subbiah, A., & Chockalingam, P. (2018). Combustion, performance, and emission analysis of diesel engine fuelled with water-biodiesel emulsion fuel and nano additive. Environmental Science and Pollution Research, 25(33), 33478–33489. https://doi.org/10.1007/s11356-018-3216-3
  • Tutak, W., Jamrozik, A., Grab-Rogaliński, K. (2020). Effect of natural gas enrichment with hydrogen on combustion process and emission characteristic of a dual fuel diesel engine. International Journal of Hydrogen Energy, 45(15), 9088–9097. https://doi.org/10.1016/j.ijhydene.2020.01.080
  • Xiu Minyu., Guanting, Li., Yaodong, Du., Zezhou, Guo., Zhen, Shang., Fengshuo, He., Qingxu, Shen., Decheng, Li., Yinan, Li. (2019). A comparative study on effects of homogeneous or stratified hydrogen on combustion and emissions of a gasoline/hydrogen SI engine. International Journal of Hydrogen Energy, 44(47), 25974–25984. https://doi.org/10.1016/j.ijhydene.2019.08.029
  • Xiu Xiu, S., Xingyu, Liang.,Gequn, Shu., Jiansheng, Lin., Yuesen, Wang., Yajun, Wang. (2017). Numerical investigation of two-stroke marine diesel engine emissions using exhaust gas recirculation at different injection time. Ocean Engineering, 144, 90–97. https://doi.org/10.1016/j.oceaneng.2017.08.044
  • Yamasaki, Y., Ikemura, R., Takahashi, M., Shimizu, F., & Kaneko, S. (2019). Simple combustion model for a diesel engine with multiple fuel injections. International Journal of EngineResearch, 20(2), 167–180. https://journals.sagepub.com/doi/full/ 10.1177/1468087417742764
  • Yang, C., & Feng., T. (2012). Abnormal Noise Diagnosis of Internal Combustion Engine Using Wavelet Spatial Correlation Filter and Symmetrized Dot Pattern. Applied Mechanicsand Materials, 141, 168–173. https://doi.org/10.4028/www.scientific.net/AMM.141.168
  • Yaodong, Du., Xiumin, Y., Jinlong, W., Haiming, W., Wei, D., Jiaqi, G. (2016). Research on combustion and emission characteristics of a lean burn gasoline engine with hydrogen direct-injection. International Journal of Hydrogen Energy, 41(4), 3240–3248. https://doi.org/10.1016/j.ijhydene.2015.12.025
  • Zheng, G. T., & Leung, A. Y. T. (2002). Internal combustion engine noise analysis time-frequency distribution. Journal of Engineering for Gas Turbines and Power, 124(3), 645–649. https://doi.org/10.1115/1.1455639
  • Zheng, Xu., Zhou, N., Qiu, Y., Liu, R., & Hao, Z. (2020). Experimental Investigation on the High-frequency Pressure Oscillation Characteristics of a Combustion Process in a DI Diesel Engine. .Energies, 13(4), 871. https://doi.org/10.3390/en13040871