Optimization of stirrer parameters by Taguchi method for a better ceramic particle stirring performance in the production of Aluminum Alloy Matrix Composite

References

• Alaneme, K. K., & Aluko, A. O. (2012). Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063)silicon carbide particulate composites. Scientia Iranica, 19(4), 992–22. https://doi.org/10.1016/j.scient.2012.06.001
   Web of Science ®Google Scholar
• Alaneme, K., & Bodunrin, M. (2013). Mechanical behaviour of alumina reinforced AA 6063 metal matrix composites developed by two step-stir casting process. ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering, 6(3), 105. https://acta.fih.upt.ro/pdf/2013-3/ACTA-2013-3-18.pdf
   Google Scholar
• Hanizam, H., Salleh, M. S., Omar, M. Z., & Sulong, A. B. (2019). Optimisation of mechanical stir casting parameters for fabrication of carbon nanotubes-aluminium alloy composite through Taguchi method. Journal of Materials Research and Technology, 8(2), 2223–2231. https://doi.org/10.1016/j.jmrt.2019.02.008
   Google Scholar
• Hashim, J., Looney, L., & Hashmi, M. S. J. (2002). Particle distribution in cast metal matrix composites - Part II. Journal of Materials Processing Technology, 123(2), 258–263. https://doi.org/10.1016/S0924-0136(02)00098-5
   Web of Science ®Google Scholar
• Jebeen Moses, J., & Joseph Sekhar, S. (2017). Investigation on the tensile strength and microhardness of AA6061/TiC composites by stir casting. Transactions of the Indian Institute of Metals, 70(4), 1035–1046. https://doi.org/10.1007/s12666-016-0891-y
   Web of Science ®Google Scholar
• Joyson Abraham, S., Chandra Rao Madane, S., Dinaharan, I., & John Baruch, L. (2016). Development of quartz particulate reinforced AA6063 aluminum matrix composites via friction stir processing. Journal of Asian Ceramic Societies, 4(4), 381–389. https://doi.org/10.1016/j.jascer.2016.08.001
   Web of Science ®Google Scholar
• Kareem, A., Qudeiri, J. A., Abdudeen, A., Ahammed, T., & Ziout, A. (2021). A review on aa 6061 metal matrix composites produced by stir casting. Materials (Basel), 14(1), 1–22. https://doi.org/10.3390/ma14010175
   Web of Science ®Google Scholar
• Khelge, S., Kumar, V., Shetty, V., & Kumaraswamy, J. (2021). Effect of reinforcement particles on the mechanical and wear properties of aluminium alloy composites: Review. Materials Today: Proceedings, (November). https://doi.org/10.1016/j.matpr.2021.09.525
   Google Scholar
• Krishnan, P. K., Arunachalam, R., Husain, A., & Al-Maharbi, M. (2021). Studies on the influence of stirrer blade design on the microstructure and mechanical properties of a novel aluminum metal matrix composite. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 143(2), 1–13. https://doi.org/10.1115/1.4048266
   Web of Science ®Google Scholar
• Kumar, P., Kumar, A., Kumar, Lavkush, A., P. Dwivedi, S., Dwivedi, S. P., & Dwivedi, S. P. (2021). Different reinforcement particles and their effects in the development of composite material by different development techniques: A review. Materials Today: Proceedings, 47(2021), 4015–4019. https://doi.org/10.1016/j.matpr.2021.04.267
   Google Scholar
• Kumar, A., Rana, R. S., & Purohit, R. (2020). Effect of stirrer design on microstructure of MWCNT and Al alloy by stir casting process. Advanced Materials Process Technologies, 6(2), 372–379. https://doi.org/10.1080/2374068X.2020.1731156
   Google Scholar
• Lloyd, D. J., Lagace, H., McLeod, A., & Morris, P. L. (1989). Microstructural aspects of aluminium-silicon carbide particulate composites produced by a casting method. Materials Science & Engineering A, 107(C), 73–80. https://doi.org/10.1016/0921-5093(89)90376-6
   Google Scholar
• Mehta, V. R., & Sutaria, M. P. (2020). Investigation on the effect of stirring process parameters on the dispersion of SiC particles inside melting crucible. Metals and Materials International, (123456789). https://doi.org/10.1007/s12540-020-00612-0
   Google Scholar
• Muhammad, F., & Jalal, S. (2022a). An overview of the effect of stirrer design on the mechanical properties of Aluminium Alloy Matrix Composites fabricated by stir casting. Zanco Journal of Pure and Applied Sciences, 34(1). https://doi.org/10.21271/zjpas.34.1.3
   Google Scholar
• Muhammad, F., & Jalal, S. (2022b). Study the effect of stirrer design on the stirring performance of ceramic particle reinforcements in stir casting of Aluminum Matrix Composites. Journal of Reinforced Plastics and Composites, 073168442211015. https://doi.org/10.1177/07316844221101579
   Web of Science ®Google Scholar
• Muhammad, F., Jalal, S., & Maraşlı, N. (2021). A comparative study of the impact of the stirrer design in the stir casting route to produce metal matrix composites. Advances in Materials Science and Engineering, 2021, 1–15. https://doi.org/10.1155/2021/4311743
   Web of Science ®Google Scholar
• Prabu, S. B., Karunamoorthy, L., Kathiresan, S., & Mohan, B. (2006). Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite. Journal of Materials Processing Technology, 171(2), 268–273. https://doi.org/10.1016/j.jmatprotec.2005.06.071
   Web of Science ®Google Scholar
• Rasyid, S., Arif, E., Arsyad, H., & Syahid, M. (2018). Effect of mechanical stirrer and pouring temperature on semi solid rheocasting of ADC12 Al Alloy: Mechanical properties and microstructure. ARPN Journal of Engineering and Applied Science, 13(6), 2032–2037.
   Google Scholar
• Rasyid, S., Renreng, I., Arif, E., Arsyad, H., & Syahid, M. (2019). Optimization of stirring parameters on the rheocast microstructure and mechanical properties of aluminum alloy ADC12. IOP Conference Series: Materials Science and Engineering, 619(1), 012028. https://doi.org/10.1088/1757-899X/619/1/012028
   Google Scholar
• Ravikumar, M., Reddappa, H. N., & Suresh, R. (2018). Aluminium composites fabrication technique and effect of improvement in their mechanical properties - A review. Materials Today: Proceedings, 5(11), 23796–23805. https://doi.org/10.1016/j.matpr.2018.10.171
   Google Scholar
• Rozhbiany, F. A. R., & Jalal, S. R. (2019). Reinforcement and processing on the machinability and mechanical properties of aluminum matrix composites. Journal of Materials Research and Technology, 8(5), 4766–4777. https://doi.org/10.1016/j.jmrt.2019.08.023
   Google Scholar
• Ryan, B. F., Joiner, B. L. , C. & Cryer, J. D. (2012) . Cengage Learning. (2022). MINITAB handbook: update for release.
   Google Scholar
• Sahu, M. K., & Sahu, R. K. (2017). Optimization of stirring parameters using CFD simulations for HAMCs synthesis by stir casting process. Transactions of the Indian Institute of Metals, 70(10), 2563–2570. https://doi.org/10.1007/s12666-017-1119-5
   Web of Science ®Google Scholar
• Shanmughasundaram, P., & Subramanian, R. (2012). Influence of magnesium and stirrer model in production of Al-fly ash composites-A taguchi approach. Journal of Applied Sciences Research, 8(3), 1646–1653.
   Google Scholar
• Singh, A. K., Soni, S., & Rana, R. S. (2020). A critical review on synthesis of aluminum metallic composites through stir casting: challenges and opportunities. Advanced Engineering Materials, 22(10), 2000322. https://doi.org/10.1002/adem.202000322
   Web of Science ®Google Scholar
• Su, H. (2010). Optimization of stirring parameters through numerical simulation for the preparation of aluminum matrix composite by stir casting process. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 132(6), 0610071–0610077. https://doi.org/10.1115/1.4002851
   Web of Science ®Google Scholar
• Vishnu Prasad, K., & Jayadevan, K. R. (2016). Simulation of stirring in stir casting. Procedia Technology, 24, 356–363. https://doi.org/10.1016/j.protcy.2016.05.048
   Google Scholar
• Yang, Z., Pan, L., Han, J., & Zhiqiang Li, Z. (2017). Experimental and simulation research on the influence of stirring parameters on the distribution of particles in cast SiCp/A356 composites. Journal of Engineering (United Kingdom), 2017(January). https://doi.org/10.1155/2017/9413060
   Google Scholar