Optimizing stress distribution in dental air abrasion through design of experiments: a finite element analysis

References

• Bagci, M. (2016). Determination of solid particle erosion with Taguchi optimization approach of hybrid composite systems. Tribology International, 94, 336–345. https://doi.org/10.1016/j.triboint.2015.09.032
   Web of Science ®Google Scholar
• Barnes, C. M. (2010). An in-depth look at air polishing. University of Nebraska - Lincoln University of Nebra. 2010. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1013&context=dentistryfacpub.
   Google Scholar
• Biswas, S., & Satapathy, A. (2010). A study on tribological behavior of alumina-filled glass-epoxy composites using Taguchi experimental design. Tribology Transactions, 53(4), 520–532. https://doi.org/10.1080/10402000903491309
   Web of Science ®Google Scholar
• Brandão, R. C. B., & Brandão, L. B. C. (2013). Finishing procedures in orthodontics: Dental dimensions and proportions (Microesthetics). Dental Press Journal of Orthodontics, 18(5), 147–174. https://doi.org/10.1590/S2176-94512013000500006
   PubMedGoogle Scholar
• Coskun, M. E., Akar, T., & Tugut, F. (2018). Airborne-particle abrasion; searching the right parameter. Journal of Dental Sciences, 13(4), 293–300. https://doi.org/10.1016/j.jds.2018.02.002
   PubMed Web of Science ®Google Scholar
• Durakovic, B. (2017). Design of experiments application, concepts, examples: State of the art. Periodicals of Engineering and Natural Sciences (PEN), 5(3), 421–439. https://doi.org/10.21533/pen.v5i3.145
   Google Scholar
• Eram, A., Zuber, M., Keni, L. G., Kalburgi, S., Naik, R., Bhandary, S., Amin, S., & Badruddin, I. A. (2020). Finite element analysis of immature teeth filled with MTA, biodentine and bioaggregate. Computer Methods and Programs in Biomedicine, 190, 105356. https://doi.org/10.1016/j.cmpb.2020.105356
   PubMed Web of Science ®Google Scholar
• Gerbo, L. R., Barnes, C. M., & Leinfelder, K. F. (1993). Applications of the air-powder polisher in clinical orthodontics. American Journal of Orthodontics and Dentofacial Orthopedics: Official Publication of the American Association of Orthodontists, Its Constituent Societies, and the American Board of Orthodontics, 103(1), 71–73. https://doi.org/10.1016/0889-5406(93)70109-2
   PubMed Web of Science ®Google Scholar
• Graumann, S. J., Sensat, M. L., & Stoltenberg, J. L. (2013). Air polishing: A review of current literature. Journal of Dental Hygiene: JDH/American Dental Hygienists’ Association, 87(4), 173–180.
   Google Scholar
• Gupta, Y., Iyer, R., Dommeti, V. K., Nutu, E., Rana, M., Merdji, A., Biswas, J. K., & Roy, S. (2021). Design of dental implant using design of experiment and topology optimization: A finite element analysis study. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of Engineering in Medicine, 235(2), 157–166. https://doi.org/10.1177/0954411920967146
   PubMed Web of Science ®Google Scholar
• Gutmann, M. E. (1998). Air polishing: A comprehensive review of the literature. Journal of Dental Hygiene: JDH, 72(3), 47–56.
   PubMedGoogle Scholar
• Islam, M. N., & Pramanik, A. (2016). Comparison of design of experiments via traditional and Taguchi method. Journal of Advanced Manufacturing Systems, 15(03), 151–160. https://doi.org/10.1142/S0219686716500116
   Google Scholar
• Karimi, A., Razaghi, R., Biglari, H., Rahmati, S. M., Sandbothe, A., & Hasani, M. (2020). Finite element modeling of the periodontal ligament under a realistic kinetic loading of the Jaw system. The Saudi Dental Journal, 32(7), 349–356. https://doi.org/10.1016/j.sdentj.2019.10.005
   PubMed Web of Science ®Google Scholar
• Keni, L. G., Kalburgi, S., Hameed, B. M. Z., Zuber, M., Tamagawa, M., & Shenoy, B. S. (2019). Finite element analysis of urinary bladder wall thickness at different pressure condition. Journal of Mechanics in Medicine and Biology, 19(05), 1950029. https://doi.org/10.1142/S0219519419500295
   Google Scholar
• Krishnaiah, K., & Shahabudeen, P. (2012). Applied design of experiments and Taguchi methods. PHI Learning.
   Google Scholar
• Leon, A., Ungureanu, L., & Puscasu, C. (2016). Air abrasion: Interdisciplinary modern technologies—Approach to minimally invasive treatment of dental caries. In Proceedings of the International Conference on Interdisciplinary Studies (ICIS 2016) - Interdisciplinarity and Creativity in the Knowledge Society. InTech. https://doi.org/10.5772/65419
   Google Scholar
• Lin, K.-W., & Chang, Y.-C. (2021). Use of the Taguchi method to optimize an immunodetection system for quantitative analysis of a rapid test. Diagnostics (Basel, Switzerland), 11(7), 1179. https://doi.org/10.3390/diagnostics11071179
   PubMedGoogle Scholar
• Mahapatra, S. S., Patnaik, A., & Satapathy, A. (2008). Taguchi method applied to parametric appraisal of erosion behavior of GF-reinforced polyester composites. Wear, 265(1-2), 214–222. https://doi.org/10.1016/j.wear.2007.10.001
   Web of Science ®Google Scholar
• Matson, M. R., Lewgoy, H. R., Barros Filho, D. A., Amore, R., Anido-Anido, A., Alonso, R. C. B., Carrilho, M. R. O., & Anauate-Netto, C. (2012). Finite element analysis of stress distribution in intact and porcelain Veneer restored teeth. Computer Methods in Biomechanics and Biomedical Engineering, 15(8), 795–800. https://doi.org/10.1080/10255842.2011.561013
   PubMed Web of Science ®Google Scholar
• Meena, A., Singh Mali, H., Patnaik, A., & Kumar, S. R. (2017). Comparative investigation of physical, mechanical and thermomechanical characterization of dental composite filled with nanohydroxyapatite and mineral trioxide aggregate. e-Polymers, 17(4), 311–319. https://doi.org/10.1515/epoly-2016-0319
   Web of Science ®Google Scholar
• Mishkin, D. J., Engler, W. O., Javed, T., Darby, T. D., Cobb, R. L., & Coffman, M. A. (1986). A clinical comparison of the effect on the Gingiva of the prophy-jet and the rubber cup and paste techniques. Journal of Periodontology, 57(3), 151–154. https://doi.org/10.1902/jop.1986.57.3.151
   PubMed Web of Science ®Google Scholar
• Murakami, N., & Wakabayashi, N. (2014). Finite element contact analysis as a critical technique in dental biomechanics: A review. Journal of Prosthodontic Research, 58(2), 92–101. https://doi.org/10.1016/j.jpor.2014.03.001
   PubMed Web of Science ®Google Scholar
• Paolinelis, G., Banerjee, A., & Watson, T. F. (2009). An in-vitro investigation of the effects of variable operating parameters on alumina air-abrasion cutting characteristics. Operative Dentistry, 34(1), 87–92. https://doi.org/10.2341/08-52
   PubMed Web of Science ®Google Scholar
• Peng, B.-R., Pan, L.-F., Huang, S.-H., Chen, C.-Y., Lin, C.-S., Chiang, F.-T., & Pan, L.-K. (2022). Practical application of Taguchi optimization methodology to medical facilities: An integrated study. Journal of Mechanics in Medicine and Biology, 22(08), 1–15. https://doi.org/10.1142/S0219519422400255
   Web of Science ®Google Scholar
• Peruchi, C., Santos-Pinto, A., Dias, T. C., Oliveira, A. C. M., & Santos-Pinto, L. (2013). Influence of air abrasion tips and operation modes on enamel-cutting characteristics. European Journal of Dentistry, 7(1), 1–5.
   PubMedGoogle Scholar
• Sawai, M., Bhardwaj, A., Jafri, Z., Sultan, N., & Daing, A. (2015). Tooth polishing: The current status. Journal of Indian Society of Periodontology, 19(4), 375. https://doi.org/10.4103/0972-124X.154170
   PubMedGoogle Scholar
• Stewardson, D. (2001). Robust engineering, Taguchi G, Chowdhury S, Taguchi S, McGraw-Hill, New York, 2000. Hard-Bound, Number of Pages: 241. ISBN 0 07 134782 8. Quality and Reliability Engineering International, 17(2), 141–142. https://doi.org/10.1002/qre.382
   Google Scholar
• Su, Y. L., Yao, S. H., Wei, C. S., Kao, W. H., & Wu, C. T. (1999). Design and performance analysis of TiCN-coated cemented Carbide milling cutters. Journal of Materials Processing Technology, 87(1-3), 82–89. https://doi.org/10.1016/S0924-0136(98)00335-5
   Web of Science ®Google Scholar
• Taguchi, G., Chowdhury, S., & Wu, Y. (2004). Taguchi’s quality engineering handbook. John Wiley & Sons, Inc. https://doi.org/10.1002/9780470258354
   Google Scholar
• Tastepe, C. S., Lin, X., Donnet, M., Wismeijer, D., & Liu, Y. (2017). Parameters that improve cleaning efficiency of subgingival air polishing on Titanium implant surfaces: An in vitro study. Journal of Periodontology, 88(4), 407–414. https://doi.org/10.1902/jop.2016.160270
   PubMed Web of Science ®Google Scholar
• Tsui, K.-L. (1992). An overview of Taguchi method and newly developed statistical methods for robust design. IIE Transactions, 24(5), 44–57. https://doi.org/10.1080/07408179208964244
   Web of Science ®Google Scholar
• Tzeng, C.-J., Lin, Y.-H., Yang, Y.-K., & Jeng, M.-C. (2009). Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis. Journal of Materials Processing Technology, 209(6), 2753–2759. https://doi.org/10.1016/j.jmatprotec.2008.06.046
   Web of Science ®Google Scholar
• Valera-Jiménez, J. F., Burgueño-Barris, G., Gómez-González, S., López-López, J., Valmaseda-Castellón, E., & Fernández-Aguado, E. (2020). Finite element analysis of narrow dental implants. Dental Materials: Official Publication of the Academy of Dental Materials, 36(7), 927–935. https://doi.org/10.1016/j.dental.2020.04.013
   PubMed Web of Science ®Google Scholar
• White, H. D., & Peyton, F. A. (1954). Effects of air abrasive in prophylaxis. Journal of the American Dental Association (1939), 49(2), 155–163. https://doi.org/10.14219/jada.archive.1954.0139
   PubMed Web of Science ®Google Scholar
• Wilkins, E. M. (2009). Clinical practice of the dental hygienist. Wolters Kluwer Health/Lippincott Williams & Wilkins.
   Google Scholar
• Yang, W. H., & Tarng, Y. S. (1998). Design optimization of cutting parameters for turning operations based on the Taguchi method. Journal of Materials Processing Technology, 84(1-3), 122–129. https://doi.org/10.1016/S0924-0136(98)00079-X
   Web of Science ®Google Scholar